This category holds impellers, shafts and stand hardware for laboratory overhead stirrers. Impeller styles include anchor, cross, paddle, straight, plain and square blades, centrifugal blades, screw and two-blade propellers, turbines and U-shaped blades. Materials are solid PTFE, PTFE-coated, 316L stainless steel (including an electropolished anchor on a 914 mm shaft) and polypropylene, with most shafts from 400 mm to 650 mm long and blade sizes from about 50 mm to 150 mm. Support parts include boss heads, a mixing stand and a universal-joint stir adapter.

Choose the impeller for the fluid and vessel. Propellers and turbines suit lower-viscosity liquids, anchors sweep near the vessel walls for thicker materials, and centrifugal blades fold to pass through narrow flask necks. Make sure the shaft diameter fits your stirrer's chuck and the length reaches the bottom of your vessel. Use PTFE or PTFE-coated parts for corrosive chemicals and 316L stainless for strength, and check model-specific listings, such as the propeller for LT/LR-400/500.

Overhead Stirrer Parts: common questions

What is an overhead stirrer impeller?

The impeller is the blade or paddle on the end of the shaft that moves the liquid. The overhead stirrer motor turns the shaft, and the impeller's shape sets the flow pattern: propellers push liquid mostly up and down along the shaft, turbines and flat blades push it outward, and anchors sweep close to the vessel wall. Impellers are interchangeable as long as the shaft fits the chuck.

Which impeller should I use for viscous samples?

For thick materials, anchor and paddle impellers are common choices because their large blades move bulk material and sweep near the vessel walls at low speed. Propellers and turbines work best in lower-viscosity liquids at higher speeds. Check that your stirrer has enough torque for the viscosity and volume, and follow the impeller maker's speed limits.

How does a centrifugal stirrer fit through a flask neck?

Centrifugal stirrers have hinged blades that hang down along the shaft when stopped, so they slide through narrow openings such as a round-bottom flask neck. As the shaft spins, the blades swing outward and mix the contents. When the stirrer stops, the blades fold back so the shaft can be removed.

Are PTFE or stainless steel stirrer blades better?

PTFE and PTFE-coated impellers resist most acids, bases and solvents and are a common choice for corrosive mixtures, but they are softer and less rigid. 316L stainless steel is stronger and handles heavier loads and higher torque, but it can be attacked by some acids and halide solutions. Check chemical compatibility for your materials before choosing.

Overhead Stirrer Parts

Filters
Set Descending Direction

76 items

Page
per page
View as List Grid
  1. Stirrer Centrifugal, PTFE 500mm
    Manufacturer: Dynalon
    Stirrer Centrifugal, PTFE 500mm (1 per EA)
    Learn More
    was $168.14 Special Price $136.24
  2. 4-blade propeller , DIA75mm for LT/LR-400/500
    Manufacturer: Yamato Scientific America
    Yamato 280078 4-Blade Propeller for LR, LT400, 500 Lab Stirrers, 2.95" dia. (1 per EA )
    Learn More
    was $55.00 Special Price $51.83
  3. Stirrer Centrifugal Blades, PP 100mm
    Manufacturer: Dynalon
    Kartell Stirring Blades are made of chemically resistant polypropylene and are fixed to a PP-covered steel rod. (5 per CS)
    Learn More
    was $365.53 Special Price $246.79
  4. Shaft Only for Blades, PTFE 400mm
    Manufacturer: Dynalon
    Shaft Only for Blades, PTFE 400mm (1 per EA)
    Learn More
    was $120.29 Special Price $97.46
  5. Clamp Double
    Manufacturer: Ohaus Corporation
    Clamp Double (1 per EA)
    Learn More
    was $111.95 Special Price $90.46
  6. Clamp Ribbon
    Manufacturer: Ohaus Corporation
    Clamp Ribbon (1 per EA)
    Learn More
    was $161.95 Special Price $130.85
  7. VAC adapter for LR-400/500
    Manufacturer: Yamato Scientific America
    These Yamato Vacuum adapter for LR-400/500 have part number 231097, are new, and come with full Yamato warranty. A variety of accessories are available to accompany Laboratory Stirrers. This collection includes: stand and rod set, stirring shafts, blade (1 per EA )
    Learn More
    was $390.00 Special Price $367.50
  8. Stand and rod set for LR/LT400/500
    Manufacturer: Yamato Scientific America
    Yamato LR-41-124 Stand & Rod Set for LR, LT400, 500 Lab Stirrers (1 per EA )
    Learn More
    was $450.00 Special Price $424.04
  9. Steel stirring shaft , DIA8mm L500mm for LT400/500
    Manufacturer: Yamato Scientific America
    Yamato Steel stirring shaft (DIA8mm L500mm) for LT400/500 have part number 231384, are new, and come with full Yamato warranty. A variety of accessories are available to accompany Laboratory Stirrers. This collection includes: stand and rod set, stirring (1 per EA )
    Learn More
    was $115.00 Special Price $108.37
  10. 4-blade propeller , DIA60mm for LT/LR-400/500
    Manufacturer: Yamato Scientific America
    Yamato 280079 4-Blade Propeller for LR, LT400, 500 Lab Stirrers, 2.36" dia. (1 per EA )
    Learn More
    was $55.00 Special Price $51.83
  11. Steel stirring shaft , DIA10mm L800mm for LR400/500
    Manufacturer: Yamato Scientific America
    Yamato LR41AY0002 Stainless Steel Long Stirring Shaft for LR400, 500 Lab Stirrers, 0.39" dia. x 31.49" (1 per EA )
    Learn More
    was $95.00 Special Price $89.52
  12. 4-blade propeller , DIA40mm for LT/LR-400/500
    Manufacturer: Yamato Scientific America
    Yamato LR41AY0003 4-Blade Propeller for LR, LT400, 500 Lab Stirrers, 1.57" dia. (1 per EA )
    Learn More
    was $55.00 Special Price $51.83
  13. Folding propeller , 18/45mm for LT/LR-400/500
    Manufacturer: Yamato Scientific America
    Yamato LR41AY0006 Folding Propeller for LR, LT400, 500 Lab Stirrers, 0.71", 1.77" dia. (1 per EA )
    Learn More
    was $55.00 Special Price $51.83
  14. Turbine propeller , DIA60mm for LT/LR-400/500
    Manufacturer: Yamato Scientific America
    Turbine Propeller for LR, LT400, 500 Lab Stirrers, 2.36" dia. (1 per EA )
    Learn More
    was $55.00 Special Price $51.83
  15. Turbine propeller , DIA100mm for LT/LR-400/500
    Manufacturer: Yamato Scientific America
    Yamato LR41AY0022 Turbine Propeller for LR, LT400, 500 Lab Stirrers, 3.93" dia. (1 per EA )
    Learn More
    was $70.00 Special Price $65.96
  16. Hi-Vac Stir2440Bearing Asm
    Manufacturer: Kimble Chase
    KONTESbrand Stirrer Assembly HI-VAC Stirrer Bearing Assembly Only [Standard Taper] 24/40 (1 per EA)
    Learn More
    was $484.46 Special Price $484.19
  17. Stirrer Shaft Size 261
    Manufacturer: Kimble Chase
    Stirrers Shaft 10 mm For Flask Capacity (mL) 100 to 5000. Approx. Ground Length (mm) 400. Approx. Overall Length (mm) 445. Shaft O.D. (mm) 10 Glass stirrer shaft with a precision-ground surface. (1 per EA)
    Learn More
    $94.29
  18. Hi-Vac Stir Shaft 445mm
    Manufacturer: Kimble Chase
    KONTESbrand Stirrer Shaft Precision Polished Glass Shaft 10 mm For Flask Capacity (mL) 100 to 5000 Approx. Overall Length (mm) 445 Shaft O.D. (mm) 10 (1 per EA)
    Learn More
    $172.88
  19. Stirrer Adapter Size 21
    Manufacturer: Kimble Chase
    Stirrer Assembly Adapters for Connecting Shafts to Stirrer Motors For use with stirrer motors. Polyacetal. Fits 8-10mm diameter shaft. (1 per EA)
    Learn More
    $92.26
  20. Stirrer Blade PTFE Size 22
    Manufacturer: Kimble Chase
    Stirrers Blade PTFE 10 mm For Flask Capacity (mL) 500 1000. Size 0022. Approx. Height x Width (mm) 19 x 75. Minimum FlaskCenter Neck SizeTS SJ 24/40 35/20 PTFE stirrer blade for 786500 shafts. Blade is 1/8 thick. All 612000 through 612200 reaction flasks take size 0022 blades. (1 per EA)
    Learn More
    $41.37
  21. Stir Bearing PTFE 2440 10M
    Manufacturer: Kimble Chase
    Stirrers Bearing PTFE [standard taper] Joint 24/40. Shaft (mm) 10. Approx. OAL (mm) 130 These solid PTFE stirrer bearings are ideal for use with Kontes series 786500 glass 10 mm precision ground stirring shafts and series 784010 glass 19 mm precision ground stirring shafts. (1 per EA)
    Learn More
    $297.79
  22. Stirrer Coupling Flex 10mm
    Manufacturer: Kimble Chase
    Stirrers Adapter Flex-Coupling Coupling for 10 mm shafts The Flex-Coupling allows 10 mm glass stirring rods to be used with a motor drive. The coupling uses a 3 long epoxy-coated spring to compensate for misalignment reduces the chance of breakage and eliminates the need for special adapters. (1 per EA)
    Learn More
    $296.97
  23. Stirrer Shaft 40x0.7 cm Fixed Blade
    Manufacturer: Ohaus Corporation
    Stirrer Shaft 40x0.7 cm Fixed Blade (1 per EA)
    Learn More
    was $177.95 Special Price $143.77
  24. Support Stand Universal-H
    Manufacturer: Ohaus Corporation
    Support Stand Universal-H (1 per EA)
    Learn More
    was $511.95 Special Price $413.54
Filters
Set Descending Direction

76 items

Page
per page
View as List Grid