Heating

The Bellco Digital Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. Speed Range: 5 – 150 Rpm +/- 2% Electrical: 230V/24V Fused At 1 Amp Brushless Motor For Low Maintenance Reverse Direction Switch Easy Mounting Bracket With ‘Peg & Grommet’ Design Dimensions: 4.5" X 5.5" X 8" (11 X 14 X 20cm) Includes Handle Standard Models: 19 In-Lb Torque, 30w Environmental Conditions, (Operating):indoor use, pollution degree 2, 4° to 50° C relative humidity 0-90% non-condensing. Environmental Conditions, (Non-operating): -10° to 60° C, relative humidity 95% maximum. (1 per EA )

The Bellco High Torque Process Controlled Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Both units are powered by standard 24V wall mounted power supplies and are CE compliant. Speed range: 5 - 150 rpm +/- 1% Electrical: 115v/24v fused at 2 AMP Brushless motor for low maintenance Reverse direction switch Rs485 network port Easy mounting bracket with ‘peg & grommet’ design Hi-torque models: 31 in-lb torque, 50w Dimensions: 9.5" x 6.0" x 7.5" (24 x 15 x 19cm) includes handle, 115v (1 per EA )

The Bellco Benchtop 12 V Micro Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 60 to 1150 rpm and have a 5 minute timer for timed mixing continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. (1 per EA )

Hot Shaker Flask Clamp Tray Use with Single Pan Hot Shaker Only. Tray fits inside the SST pan has rubber bumpers for a snug fit. Holds six (6) 500mL Shake Flasks, 2 rows of 3. Material of Tray: SST .031" thick with electropolish finish (1 per EA )

The Bellco Process Controlled Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Both units are powered by standard 24V wall mounted power supplies and are CE compliant. Speed range: 5 - 150 rpm +/- 1% Electrical: 230v/24v fused at 1 AMP Brushless motor for low maintenance Reverse direction switch Rs485 network port Easy mounting bracket with ‘peg & grommet’ design Standard models: 19 in-lb torque, 30w” Dimensions: 4.5" X 5.5" X 8" (11 X 14 X 20cm) includes handle, 230v (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

The Bellco High Torque Process Controlled Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Both units are powered by standard 24V wall mounted power supplies and are CE compliant. Speed range: 5 - 150 rpm +/- 1% Electrical: 230v/24v fused at 2 AMP Brushless motor for low maintenance Reverse direction switch Rs485 network port Easy mounting bracket with ‘peg & grommet’ design Hi-torque models: 31 in-lb torque, 50w Dimensions: 9.5" x 6.0" x 7.5" (24 x 15 x 19cm) includes handle, 230v (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )