Heating

The Bellco btbTM12 Volt Orbital Shaker is a compact unit designed for continuous duty shaking using intrinsically safe low voltage electronics. The one-inch orbital motion provides even mixing. The rubber suction cup feet keep the unit firmly attached to surface. Counterbalanced drive shafts for precise orbital motion. Includes 25x25cm (10x10" ) tray. Dims: 11x11x5" (28x28x14cm). NOTE: CAN USE THE UNIVERSAL TRAYS WITH CLAMPS BUT ONLY THE SMALL TRAYS - 25X25 (1 per EA )

The Bellco Sci-ERA Hot Shaker is a slow speed, large orbit shaker for incubation of electrophoretic gels and filter hybridization media. Stringent temperature control with a sensitivity of +/-0.1°C is useful for many biochemical assays. This Bellco design incorporates a seamless stainless steel lined temperature controlled water bath mounted on a low-profile one inch orbiting platform. The unique chamber design offers simple containment of potential spills. The chamber is completely isolated from electromechanical components. The Sci-ERA Hot Shaker has audible over-temperature alarms and built-in safety features to prevent heater burn-out. An easy-to-use microprocessor controller offers stringent temperature control. (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

The Bellco Digital CTII Hi-Torque Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. Hi-Torque Overhead Drive with interface for use with CellTrol II controller. Having speed capability user can monitor (but not control) rpm of OHD from the controller display and set alarm for rpm setpoints. Includes speed cable and power supply. (1 per EA )

The Bellco btbTM12 Volt Orbital Shaker is a compact unit designed for continuous duty shaking using intrinsically safe low voltage electronics. The one-inch orbital motion provides even mixing. The rubber suction cup feet keep the unit firmly attached to surface. Counterbalanced drive shafts for precise orbital motion. Includes 25x25cm (10x10" ) tray. Dims: 11x11x5" (28x28x14cm) (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory. (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Manufactured from 316L stainless steel with electropolish finish. Dimensions: 1/2" od x 7 1/2" long Size: 5l Includes: e-clip for mounting marine prop (1964-73000) (1 per EA )

Material: 316l stainless steel with electropolish finish Dimensions: 1/2"x 7 1/2" Size: 8l Includes: e-clip for mounting marine prop (1964-73000) (1 per EA )

The Bellco Digital CTII Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. A detachable speed cable (included) attaches to the rear of the Digital CTII to allow real-time monitoring and trending of data when connected to a Celltrol II controller. (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

Material: 316l stainless steel with electropolish finish Dimensions: 1/2" x 16 1/2" Size: 36l Includes: e-clip for mounting marine prop (1964-73000) (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

The Bellco Sci-ERA Hot Shaker is a slow speed, large orbit shaker for incubation of electrophoretic gels and filter hybridization media. Stringent temperature control with a sensitivity of +/-0.1°C is useful for many biochemical assays. This Bellco design incorporates a seamless stainless steel lined temperature controlled water bath mounted on a low-profile one inch orbiting platform. The unique chamber design offers simple containment of potential spills. The chamber is completely isolated from electromechanical components. The Sci-ERA Hot Shaker has audible over-temperature alarms and built-in safety features to prevent heater burn-out. An easy-to-use microprocessor controller offers stringent temperature control. (1 per EA )

The Bellco Process Controlled Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Both units are powered by standard 24V wall mounted power supplies and are CE compliant. Speed range: 5 - 150 rpm +/- 1% Electrical: 115v/24v fused at 1 AMP Brushless motor for low maintenance Reverse direction switch Rs485 network port Easy mounting bracket with ‘peg & grommet’ design Standard models: 19 in-lb torque, 30w” Dimensions: 4.5" X 5.5" X 8" (11 X 14 X 20cm) includes handle, 115v (1 per EA )

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant. (1 per EA )

The Bellco High Torque Digital Overhead Drive is a versatile directdrive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The High Torque model is ideal for the agitation of medium to viscous liquids. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. Speed range: 5 - 150 rpm +/- 2% Electrical: 230v/24v fused at 2 AMP Brushless motor for low maintenance Reverse direction switch Easy mounting bracket with ‘peg & grommet’ design Hi-torque models: 31 in-lb torque, 50w Dimensions: 9.5" x 6" x 7.5" (24 x 15 x 19cm) includes handle, 230v (1 per EA )

The Bellco Digital Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. Speed Range: 5 – 150 Rpm +/- 2% Electrical: 115V/24V Fused At 1 Amp Brushless Motor For Low Maintenance Reverse Direction Switch Easy Mounting Bracket With ‘Peg & Grommet’ Design Dimensions: 4.5" X 5.5" X 8" (11 X 14 X 20cm) Includes Handle Standard Models: 19 In-Lb Torque, 30w Environmental Conditions, (Operating):indoor use, pollution degree 2, 4° to 50° C relative humidity 0-90% non-condensing. Environmental Conditions, (Non-operating): -10° to 60° C, relative humidity 95% maximum. (1 per EA )

The Bellco High Torque Digital Overhead Drive is a versatile directdrive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The High Torque model is ideal for the agitation of medium to viscous liquids. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. Speed range: 5 - 150 rpm +/- 2% Electrical: 115v/24v fused at 2 AMP Brushless motor for low maintenance Reverse direction switch Easy mounting bracket with ‘peg & grommet’ design Hi-torque models: 31 in-lb torque, 50w Dimensions: 9.5" x 6" x 7.5" (24 x 15 x 19cm) includes handle, 115v (1 per EA )

Stainless steel tray measures 9.75" × 17.75" and includes 10 stainless steel clamps for 125ml Erlenmeyer flasks. Stainless steel Measures: 9.75" deep ×17.75" wide (approx.) For single pan only (1 per EA )

Material: 316l stainless steel with electropolish finish Dimensions: 1/2" x 14 1/2" Size: 15l Includes: e-clip for mounting marine prop (1964-73000) (1 per EA )

The Bellco Benchtop 12 V Micro Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between the speed range of 60 to 1150 rpm and have a 5 minute timer for timed mixing continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. (1 per EA )

Hot Shaker Flask Clamp Tray Use with Single Pan Hot Shaker Only. Tray fits inside the SST pan has rubber bumpers for a snug fit. Holds eight (8) 250ml shake flasks, two rows of 4. Material of Tray: SST .031" thick w/electropolish finish Dimensions: 9 3/4" d x 17 3/4" wide (approx) (1 per EA )