Desiccators

Hand Vacuum Pump only for use with Filtering kit #FLTKIT (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The transparent PC bottom provides increased viewing clarity. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock has a self-lubricating PTFE plug. The three-way plug opens to create a vacuum, closes to hold a vacuum, and opens again to release a vacuum. (1 per EA)

These clear non-vacuum desiccators are manufactured from borosilicate glass and include a borosilicate glass lid with a molded-in knob. Clear glass provides excellent visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an air-tight seal. Also includes a perforated porcelain desiccator plate that fits onto a ridge above the lower chamber. A standard drying agent such as silica or anhydrous calcium chloride can be positioned in the lower chamber. (1 per EA)

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Ever (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

Non-vacuum desiccator manufactured from clear borosilicate glass, including borosilicate glass lid with a molded-in knob. Also includes a perforated porcelain desiccator plate that fits onto a ridge above the lower chamber. A standard drying agent, such as silica or anhydrous calcium chloride, can be positioned in the lower chamber. Autoclavable. Flange outer diameter: 300mm Flange inner diameter: 234mm Top chamber diameter: 300mm Top chamber height: 125mm Maximum clearance above plate: 205mm Note: The rims of the desiccator and lid are ground glass and require greasing before use to create an air-tight seal. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Ever (1 per EA)

Desiccators include on three 16mm high feet. Glazed on top surface. (1 per EA)

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Ever (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP. An internal groove on the flange holds the silicon rubber O-ring. Vacuum grease should be applied on the flanges to make it air-tight. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP. An internal groove on the flange holds the silicon rubber O-ring. Vacuum grease should be applied on the flanges to make it air-tight. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

Non-vacuum desiccator manufactured from clear borosilicate glass, including borosilicate glass lid with a molded-in knob. Also includes a perforated porcelain desiccator plate that fits onto a ridge above the lower chamber. A standard drying agent, such as silica or anhydrous calcium chloride, can be positioned in the lower chamber. Autoclavable. Flange outer diameter: 200mm Flange inner diameter: 180mm Top chamber diameter: 200mm Top chamber height: 105mm Maximum clearance above plate: 175mm Note: The rims of the desiccator and lid are ground glass and require greasing before use to create an air-tight seal. (1 per EA)

Desiccators include on three 16mm high feet. Glazed on top surface. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP. An internal groove on the flange holds the silicon rubber O-ring. Vacuum grease should be applied on the flanges to make it air-tight. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The transparent PC bottom provides increased viewing clarity. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock has a self-lubricating PTFE plug. The three-way plug opens to create a vacuum, closes to hold a vacuum, and opens again to release a vacuum. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP. An internal groove on the flange holds the silicon rubber O-ring. Vacuum grease should be applied on the flanges to make it air-tight. (1 per EA)

Plates include 30mm diameter perforations. Also includes large hole in center. Glazed on one side. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The transparent PC bottom provides increased viewing clarity. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock has a self-lubricating PTFE plug. The three-way plug opens to create a vacuum, closes to hold a vacuum, and opens again to release a vacuum. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The transparent PC bottom provides increased viewing clarity. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock has a self-lubricating PTFE plug. The three-way plug opens to create a vacuum, closes to hold a vacuum, and opens again to release a vacuum. (1 per EA)

Plates include 30mm diameter perforations. Also includes large hole in center. Glazed on one side. (1 per EA)

Desiccators include on three 16mm high feet. Glazed on top surface. (1 per EA)