Lab Procurement Services offers a comprehensive range of high-quality, affordable constant temperature equipment to handle a variety of applications.  Please see individual categories for

As well as the Parts and Accessories sections.  Our experts are here to help with product selection and quotations - give us a call, or set up a meeting!

Before ordering, check the temperature range against your method: the digital water baths here cover ambient +5° to 99°C, while refrigerated circulators reach -30°C at the low end and up to 170°C at the high end. Compare bath volume, and for chillers the cooling capacity (in kW or HP) and pump type, since the DuraChill CA chillers are listed with either a turbine or a positive displacement pump. Confirm voltage and frequency (120V 60Hz, 208-240V or 230V). Plan for the bath fluid too, such as polycool glycol mixes for below-ambient work and algae inhibitor for water baths, plus the fittings, lids and bypass kits your setup needs.

Constant Temperature: common questions

What is constant temperature equipment?

Constant temperature equipment holds samples, vessels or connected instruments at a set temperature. It includes water and bead baths, heated and refrigerated circulators, recirculating chillers, immersion coolers, general-purpose, CO2 and shaking incubators, humidity test chambers and plant growth chambers. The right choice depends on temperature range, stability, capacity, and whether you need to heat, cool or both.

What is the difference between a circulator and a chiller?

A circulator has a bath with a heater, often refrigeration, and a pump that can control the bath itself or circulate fluid through external equipment. A recirculating chiller is mainly built to remove heat, supplying cooled fluid to equipment such as rotary evaporators, condensers or lasers. Chillers typically focus on cooling capacity, while circulators offer wider temperature ranges and their own working bath.

What fluid should I use in a lab bath or circulator?

Distilled or deionized water is commonly used for moderate temperatures, often with an algae inhibitor to keep the bath clean. For temperatures near or below freezing, a water and glycol mix is typical, and specialty fluids or oils are used at higher temperatures. Use a fluid rated for your full operating range and approved by the equipment manufacturer.

Can I get a quote on a chiller or incubator?

Yes. Volume and quote pricing is available through the Contact Us page, and approved business accounts can pay by purchase order. Larger equipment often ships directly from the manufacturer, so lead times vary by item. Include the model, voltage and quantity in your request so the quote matches what you need.

Constant Temperature

Filters
Set Descending Direction

176 items

Page
per page
View as List Grid
  1. Fitting, 1/2” male NPT x 3/8” (9.5 mm) hose barb, brass, elbow
    Manufacturer: Polyscience Corp
    Fitting, 1/2in. male NPT x 3/8in., 9.5 mm hose barb, brass, elbow EA /1 (1 per EA)
    Learn More
    $32.51
  2. Open Bath, 23L, Polycarbonate, MX (Ambient +10° to 85°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $2,516.50 Special Price $2,360.48
  3. Open Bath, 14L, Polycarbonate, MX (Ambient +10° to 85°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $2,256.00 Special Price $2,116.13
  4. Immersion Probe Cooler, IP-80, 1.75” Ø Rigid Coil Probe, (-80° to -40°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $9,524.25 Special Price $8,933.75
  5. Insulation for all 1/4in. , 6 mm tubing / 6ft , 2 m lengths EA/1
    Manufacturer: Polyscience Corp
    Insulation for all 1/4in. , 6 mm tubing / 6ft , 2 m lengths EA/1 (1 per EA )
    Learn More
    $24.96
  6. Bypass Kit, silicone tubing, 1/2” ID x 6”, MX Controllers only
    Manufacturer: Polyscience Corp
    Bypass Kit, silicone tubing, 1/2in. ID x 6in., MX Controllers only EA /1 (1 per EA)
    Learn More
    $25.75
  7. Lid, Water Bath, 20L and 28L, High-Clearance, (Model WB20, WB28, WBE20 and WBE28)
    Manufacturer: Polyscience Corp
    High-Clearance Lid, 20L and 28L Water Bath, Model WB20 and WB28 EA /1 (1 per EA)
    Learn More
    $162.75
  8. Air Filter for 1.5HP Chillers
    Manufacturer: Polyscience Corp
    Air Filter for 1.5HP Chillers EA /1 (1 per EA)
    Learn More
    $99.51
  9. Sediment Filter Kit, with Housing and Bypass, 50 micron Filter
    Manufacturer: Polyscience Corp
    50 micron Filter Kit with Housing and Bypass EA /1 (1 per EA)
    Learn More
    $402.51
  10. Fitting, 1/4” male NPT x 3/16” (5 mm) hose barb, nylon
    Manufacturer: Polyscience Corp
    Fitting, 1/4in. male NPT x 3/16in., 5 mm hose barb, nylon EA /1 (1 per EA)
    Learn More
    $2.25
  11. Air Filter for 15R-30, 15R-40, 20R-30, and 28R-30 Refrigerated/Heated Circulating Baths
    Manufacturer: Polyscience Corp
    Air Filter for 15R-30, 15R-40, 20R-30, and 28R-30 Refrigerated/Heated Circulating Baths EA /1 (1 per EA)
    Learn More
    $19.25
  12. Viscometer Holder, removable, for Viscosity Baths with round openings
    Manufacturer: Polyscience Corp
    Viscometer Holder, removable, for Viscosity Baths with round openings EA /1 (1 per EA)
    Learn More
    $55.00
  13. polytherm PAG140 (Temperature Range: 50° to 140°C), 1 gallon (3.8 L)
    Manufacturer: Polyscience Corp
    polytherm PAG140 (Temperature Range: 50° to 140°C), 1 gallon (3.8 L) (1 per EA )
    Learn More
    $110.25
  14. Refrigerated Circulator, 15L, MX (-30° to 135°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $5,965.25 Special Price $5,595.41
  15. Test Tube Rack, Stainless Steel, 10-13 mm, holds 30 maximum
    Manufacturer: Polyscience Corp
    Stainless Steel Rack, 10-13 mm, holds 30 maximum EA /1 (1 per EA)
    Learn More
    $200.25
  16. Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20° to 40°C)
    Manufacturer: Polyscience Corp
    Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz (-20° to 40°C) (1 per EA )
    Learn More
    $12,657.25
  17. Kit, Filter Ass'y , Durachill CA Chillers
    Manufacturer: Polyscience Corp
    Kit, Filter Ass'y , Durachill CA Chillers (1 per EA )
    Learn More
    $302.75
  18. Sediment Filter, 50 micron (package of 1) (for LS, LM and MM Chillers)
    Manufacturer: Polyscience Corp
    50 micron Sediment Filter for LS, LM and MM Benchtop Chillers, PK/1 EA /1 (1 per EA)
    Learn More
    $37.75
  19. polycool EG -25 (Temperature Range: -25° to 100°C), 1 gallon (3.8 L)
    Manufacturer: Polyscience Corp
    polycool EG -25 (Temperature Range: -25° to 100°C), 1 gallon (3.8 L) (1 per EA )
    Learn More
    $263.75
  20. Air Filter Kit, Dynamic (DuraChill CA Chillers AFTER 9/1/2021)
    Manufacturer: Polyscience Corp
    Air Filter Kit, Dynamic (DuraChill CA Chillers AFTER 9/1/2021) (1 per EA )
    Learn More
    $485.25
  21. Probe, Pt100, Cable length: 2’ (0.6 m) (For Chillers)
    Manufacturer: Polyscience Corp
    External Pt100 Probe, Cable length: 2ft, 0.6 m EA /1 (1 per EA)
    Learn More
    $300.00
  22. polytherm S200 (Temperature Range: 100° to 200°C), 1 gallon (3.8 L)
    Manufacturer: Polyscience Corp
    polytherm S200 (Temperature Range: 100° to 200°C), 1 gallon (3.8 L) (1 per EA )
    Learn More
    $1,819.51
  23. Fitting, 1/2” male NPT x 5/8” (16 mm) hose barb, nylon, straight
    Manufacturer: Polyscience Corp
    Fitting, 1/2in. male NPT x 5/8in., 8 mm hose barb, nylon, straight, for integrated cooling coils EA /1 (1 per EA)
    Learn More
    $14.51
  24. Lid, Water Bath, 10L, High-Clearance, (Models WB10 and WBE 10)
    Manufacturer: Polyscience Corp
    High-Clearance Lid, 10L Water Bath, Model WB10 EA /1 (1 per EA)
    Learn More
    $140.00
Filters
Set Descending Direction

176 items

Page
per page
View as List Grid