Lab Procurement Services offers a comprehensive range of high-quality, affordable constant temperature equipment to handle a variety of applications.  Please see individual categories for

As well as the Parts and Accessories sections.  Our experts are here to help with product selection and quotations - give us a call, or set up a meeting!

Before ordering, check the temperature range against your method: the digital water baths here cover ambient +5° to 99°C, while refrigerated circulators reach -30°C at the low end and up to 170°C at the high end. Compare bath volume, and for chillers the cooling capacity (in kW or HP) and pump type, since the DuraChill CA chillers are listed with either a turbine or a positive displacement pump. Confirm voltage and frequency (120V 60Hz, 208-240V or 230V). Plan for the bath fluid too, such as polycool glycol mixes for below-ambient work and algae inhibitor for water baths, plus the fittings, lids and bypass kits your setup needs.

Constant Temperature: common questions

What is constant temperature equipment?

Constant temperature equipment holds samples, vessels or connected instruments at a set temperature. It includes water and bead baths, heated and refrigerated circulators, recirculating chillers, immersion coolers, general-purpose, CO2 and shaking incubators, humidity test chambers and plant growth chambers. The right choice depends on temperature range, stability, capacity, and whether you need to heat, cool or both.

What is the difference between a circulator and a chiller?

A circulator has a bath with a heater, often refrigeration, and a pump that can control the bath itself or circulate fluid through external equipment. A recirculating chiller is mainly built to remove heat, supplying cooled fluid to equipment such as rotary evaporators, condensers or lasers. Chillers typically focus on cooling capacity, while circulators offer wider temperature ranges and their own working bath.

What fluid should I use in a lab bath or circulator?

Distilled or deionized water is commonly used for moderate temperatures, often with an algae inhibitor to keep the bath clean. For temperatures near or below freezing, a water and glycol mix is typical, and specialty fluids or oils are used at higher temperatures. Use a fluid rated for your full operating range and approved by the equipment manufacturer.

Can I get a quote on a chiller or incubator?

Yes. Volume and quote pricing is available through the Contact Us page, and approved business accounts can pay by purchase order. Larger equipment often ships directly from the manufacturer, so lead times vary by item. Include the model, voltage and quantity in your request so the quote matches what you need.

Constant Temperature

Filters
Set Descending Direction

176 items

Page
per page
View as List Grid
  1. Water Bath, 2L Digital, (Ambient +5° to 99°C), 240V, 50/60Hz
    Manufacturer: Polyscience Corp
    Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )
    Learn More
    was $657.00 Special Price $616.27
  2. Immersion Probe Cooler, IP-100, 0.7” Ø Rigid Cold Finger Probe, (-100° to -60°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $9,610.50 Special Price $9,014.66
  3. 5 micron Sediment Filter, PK/2
    Manufacturer: Polyscience Corp
    5 micron Sediment Filter, PK/2 (2 per PK )
    Learn More
    was $35.00 Special Price $33.72
  4. Fitting, 1/2” (13 mm) barb x 3/8” (9.5 mm) barb, glass filled nylon (for MX Controllers)
    Manufacturer: Polyscience Corp
    Fitting, 1/2in., 13 mm barb x 3/8in., 9.5 mm barb, glass filled nylon, for MX Controllers EA /1 (1 per EA)
    Learn More
    $5.51
  5. Water Bath, 5L Digital, (Ambient +5° to 99°C), 240V, 50/60Hz
    Manufacturer: Polyscience Corp
    Key Features: Displays actual and set point temperature simultaneously Programmable pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration off-set feature Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Also compatible with waterless bath beads All 220-240V units are compatible with both 50Hz and 60Hz electrical systems (1 per EA )
    Learn More
    was $792.50 Special Price $743.37
  6. Immersion Probe Cooler, IP-100, 3” Ø Rigid Coil Probe, (-100° to -60°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $9,610.50 Special Price $9,014.66
  7. Solid Plug for calibration bath lid, Viton®
    Manufacturer: Polyscience Corp
    Solid Plug for calibration bath lid, Viton EA /1 (1 per EA)
    Learn More
    $15.00
  8. Air Filter for 6000 Series (1/4 to 1HP), Model 3370, IP-100, IP-80, Cryoprecipitate Bath
    Manufacturer: Polyscience Corp
    Air Filter for Cryoprecipitate Bath EA /1 (1 per EA)
    Learn More
    $25.75
  9. Fitting, 1/2” male NPT x 3/8” (9.5 mm) hose barb, brass, straight
    Manufacturer: Polyscience Corp
    Fitting, 1/2in. male NPT x 3/8in., 9.5 mm hose barb, brass, straight EA /1 (1 per EA)
    Learn More
    $11.25
  10. polyclean CLARIFIER - 8 oz
    Manufacturer: Polyscience Corp
    polyclean CLARIFIER - 8 oz EA /1 (1 per EA)
    Learn More
    $53.00
  11. 7L Low-Profile Refrigerated Circulator, MX, -20deg to 135degC, 120V, 60Hz EA /1
    Manufacturer: Polyscience Corp
    Our Circulating Baths set the standard on design, performance and value. With the capability to reach temperatures as low as -40°C, PolyScience Refrigerated/Heated Circulating Baths deliver reliable temperature control for a wide variety of laboratory cooling applications. (1 per EA)
    Learn More
    was $4,655.50 Special Price $4,366.87
  12. RS232 Retrofit Kit (LS/LM/MM Series Chillers only)
    Manufacturer: Polyscience Corp
    RS232 Retrofit Kit, LS/LM/MM Series Chillers only EA /1 (1 per EA)
    Learn More
    $227.00
  13. External Bypass (for Chillers with M pump)
    Manufacturer: Polyscience Corp
    External bypass for 6000 Series Chillers with Magnetic Drive Centrifugal Pumps. Connects to inlet and outlet, allowing bypass flow when application flow is stopped. (1 per EA)
    Learn More
    $111.25
  14. Fitting, 1/4” male NPT x 3/8” (9.5 mm) hose barb, stainless steel
    Manufacturer: Polyscience Corp
    Fitting, 1/4in. male NPT x 3/8in., 9.5 mm hose barb, stainless steel EA /1 (1 per EA)
    Learn More
    $20.51
  15. Refrigerated Circulator, 7L Space-Saving, MX (-20° to 135°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $4,541.25 Special Price $4,259.69
  16. Chiller 1.5HP Turbine Pump, Air-Cooled, 230V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available (1 per EA)
    Learn More
    $11,888.51
  17. Coliform Bath, 28L, MX (Ambient +10° to 135°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    28L Coliform Bath, MX, Ambient +10deg to 135degC, 240V, 50Hz EA /1 (1 per EA)
    Learn More
    was $3,467.00 Special Price $3,252.05
  18. Fitting , 1/2” male NPT to M16 x 13 mm (1/2”), brass, straight, quantity 2
    Manufacturer: Polyscience Corp
    Fitting, 1/2in. male NPT to M16 x 13 mm, 1/2in., brass, straight, quantity 2 EA /1 (1 per EA)
    Learn More
    $69.51
  19. Open Bath, 28L, Stainless Steel, MX (Ambient +10° to 135°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $2,400.50 Special Price $2,251.67
  20. Heated Circulator, 15L, MX (Ambient +10° to 135°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $2,861.00 Special Price $2,683.62
  21. Immersion Probe Cooler, IP-100, 3” Ø Rigid Coil Probe, (-100° to -60°C), 120V, 60Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $8,903.50 Special Price $8,351.49
  22. Immersion Probe Cooler, IP-35, 3” Ø Rigid Coil Probe, (-35° to +40°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Continuous cooling to temperatures as low as -100°C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids (1 per EA)
    Learn More
    was $4,186.50 Special Price $3,926.95
  23. Open Bath, 17L, Polycarbonate, MX (Ambient +10° to 85°C), 240V, 50Hz
    Manufacturer: Polyscience Corp
    Key Features: Large, universal icon and English display On-screen prompts Single-point calibration capability (1 per EA)
    Learn More
    was $2,394.50 Special Price $2,246.04
  24. 20 micron Sediment Filter, PK/2
    Manufacturer: Polyscience Corp
    20 micron Sediment Filter, PK/2 (2 per PK )
    Learn More
    was $66.50 Special Price $64.08
Filters
Set Descending Direction

176 items

Page
per page
View as List Grid