Incubators, General

10L Bioreactor Stand (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Dimensions: 14 1/2"W x 29 3/16"L. Open Stand for SI9/SI9R,24 ". Slotted Holes; 4 rows of 28, hole size; 3/8" x 1 3/4". Supply with 4 clips ( A512-42) (1 per EA )

The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume. Refrigerated roll-in incubator ideal for insect cell incubations performed at 27 degrees c. Microprocessor PID temperature controller accommodates up to 9-deck fixed frame or base +7 modular Bellco cell production roller apparatus. Accessory power outlets (4) in chamber provided for supplemental equipment. Forced air circulation facilitates even temperature distribution. Control panel w/power switch, convenience outlet, safety thermostat refrigeration switch, temperature controller. "flush to floor' design allows easy loading of Bellco roller apparatus. Btu/hr: 5,120 max. (1 per EA )

The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

Borosilicate glass, type 1, class a 45 mm polypropylene screw cap provides secure seal Polypropylene pouring ring allows drip free pouring and protects rim Replacement cap: 5637-00045; pouring ring: 5637-10045 Area (cm2): 1585, OD x OAL: 110 x 570mm (1 per EA )

Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 17x13" Size: 36l (1 per EA )

Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 2x11" Size: 15l (1 per EA )

Bellco Mini Roll-In Incubators have 21 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets. (1 per EA )

This tray only fits the back-to-basics II reciprocating shaker units. Includes rubber mat with peg and grommet design. Customer must use this tray or stainless steel tray 7677-32010 for reciprocating shaker units. Size: 10"x10" (1 per EA )

This tray only fits the back-to-basics II reciprocating shaker units. Includes rubber mat with peg and grommet design. Customer must use this tray or 7677-31010 for reciprocating shaker units. Size: 10"x10" (1 per EA )

Stacking Tray for Back-To-Basics II Rocker (1 per EA )

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )

Stainless steel stand for round bottom large flange omni vessels. Material: 316l stainless steel Dimensions: 19.5x14" Heavy duty stainless w/locking clamp Silicone cushion protects glass vessel Four legs provides stability (1 per EA )

Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 9×8" Size: 6l (1 per EA )

Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6l or 9l vessels or carboys. Material: stainless steel Dimensions: 10 3/14" x 9" Size: 8l (1 per EA )

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks. (1 per EA )

Bellco CO2 Incubators have 40 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). One internal convenience outlet on top allows simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. A microprocessor CO2 controller allows simple setting and monitoring of chamber CO2 level. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Bellco CO2 Incubators have 40 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). One internal convenience outlet on top allows simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. A microprocessor CO2 controller allows simple setting and monitoring of chamber CO2 level. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Stainless steel stand for round bottom large flange omni vessels. Material: 316l stainless steel Dimensions: 24x14" Heavy duty stainless w/locking clamp Silicone cushion protects glass vessel Four legs provides stability (1 per EA )

Bioreactor Stand w/ 6 Bolts for 7L bioreactor (1 per EA )

Stainless steel stand for round bottom large flange omni vessels. Material: 316l stainless steel Heavy duty stainless w/locking clamp Silicone cushion protects glass vessel Four legs provides stability (1 per EA )

The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume. Refrigerated roll-in incubator ideal for insect cell incubations performed at 27 degrees c. Microprocessor PID temperature controller accommodates up to 9-deck fixed frame or base +7 modular Bellco cell production roller apparatus. Accessory power outlets (4) in chamber provided for supplemental equipment. Forced air circulation facilitates even temperature distribution. Control panel w/power switch, convenience outlet, safety thermostat refrigeration switch, temperature controller. "flush to floor' design allows easy loading of Bellco roller apparatus. Btu/hr: 5,120 max. (1 per EA )