Incubators, General

Incucell natural gravity convection microbiological incubators provide noiseless operation and gentle airflow along with exceptional temperature uniformity. The lack of a fan significantly reduces particle movement inside the chamber, making incucell incubators ideal for the safe treatment of microbiological cultures. (1 per EA )

Yamato Scientific IC413CW IC Series Natural Convection Incubator with Window, 97L Capacity, 220V Features main and sub displays and a jog digital with a center switch Simple and quick operation with only one digital Fluorescent display provides operation (1 per EA )

The Natural gravity convection Incucell incubator provide soft air flow which will not distrub the media. As well the Incucell has quiet operation. The Incucell double wall chamber design provides easy and higher levels of cleaning and sterilization standards. Volumes: 22, 55, 111, 222, 404, 707 litres Working temperature: 5 degC above ambient temperature up to 100 degC Interior: 540 x 520 x 760 mm 21.2 x 20.5 x 29.9" Exterior: 760 x 790 x 1090 mm 29.9 x 31.1 x 42.9" -Microprocessor control Fuzzy Logic -3-conductors PT-100 control sensor -Integrated RS 232 for Warmcomm or print -3 inch transreflective LCD COG display -Keyboard block of unauthorized access -Integrated USB Device for Warmcomm -Electronical security device type 2 -Galvanized sheet metal painted exterior -Inner walls from stainless steel -Exhaust duct -Click out inner walls -Up to 2 segments, up to 99 cycles -2 chrome plated trays included -9 programs -Acoustic and visual alarm -Real time feature (1 per EA )

MyTemp Mini Digital Incubator, with heating only 230V, EA /1 (1 per EA)

Patented air movement system. The Incucell V ECO chamber moves air both vertically and horizontally. This leads to an excpetional uniform temperature profile throughout the chamber and short heating times. Operating efficiency is assured with precision heating for use in microbiological and biological laboratories. Volumes: 22, 55, 111, 222, 404, 707 litres Working temperature: 10 degC above ambient temperature up to 100 degC Interior: 540 x 540 x 1410 mm 21.1 x 21.1 x 55.5" Exterior: 760 x 790 x 1910 mm 29.9 x 31.1 x 75.1" -Microprocessor control Fuzzy Logic -3-conductors PT-100 control sensor -Integrated RS 232 for Warmcomm or print -3 inch transreflective LCD COG display -Keyboard block of unauthorized access -Integrated USB Device for Warmcomm -Electronical security device type 2 -Galvanized sheet metal painted exterior -Inner walls from stainless steel -Exhaust duct -Click out inner walls -Up to 2 segments, up to 99 cycles -2 chrome plated trays included -9 programs -Acoustic and visual alarm -Real time feature (1 per EA )

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Dimensions: 14 1/2"W x 29 3/16"L. Open Stand for SI9/SI9R,24 ". Slotted Holes; 4 rows of 28, hole size; 3/8" x 1 3/4". Supply with 4 clips ( A512-42) (1 per EA )

Specially designed for optimal temperature control as well as minimal sample contamination caused by external air intrusion. (1 per EA)

ILP-12 Personal Low Temp incubator 120V, 60Hz, 108lbs, 17 x 26.2 x 24.4, 48L, 1.7cu ft, Category=Incubator, 120V, 60Hz (1 per EA)

The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

The Bellco Refrigerated Roll-In Incubators have 40 cubic feet of volume. Refrigerated roll-in incubator ideal for insect cell incubations performed at 27 degrees c. Microprocessor PID temperature controller accommodates up to 9-deck fixed frame or base +7 modular Bellco cell production roller apparatus. Accessory power outlets (4) in chamber provided for supplemental equipment. Forced air circulation facilitates even temperature distribution. Control panel w/power switch, convenience outlet, safety thermostat refrigeration switch, temperature controller. "flush to floor' design allows easy loading of Bellco roller apparatus. Btu/hr: 5,120 max. (1 per EA )

Incucell natural gravity convection microbiological incubators provide noiseless operation and gentle airflow along with exceptional temperature uniformity. The lack of a fan significantly reduces particle movement inside the chamber, making incucell incubators ideal for the safe treatment of microbiological cultures. (1 per EA )

The Bellco Mini Refrigerated Roll-In Incubator has 21 cubic feet of volume and is designed for use with Bellco’s Cell Production Roller Apparatus (CPRA) up to 2 decks high. The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets allow simple connection for internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Shelf brackets are included for mounting optional shelves to hold these appliances. Fans take air from the chamber top, pass it over the 1100 watt heater and inject it into the chamber on the bottom back wall. When the refrigeration mode is active, the air is cooled using a thermoelectric cooler. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. The control panel contains indicator lights and dials for controlling temperature. A safety thermostat is included to prevent over-temperature failures. The unit is not intended for use with CO2 environments. (1 per EA )

MyTemp Mini Digital Incubator, with heating and cooling 115V, EA /1 (1 per EA)

Incucell natural gravity convection microbiological incubators provide noiseless operation and gentle airflow along with exceptional temperature uniformity. The lack of a fan significantly reduces particle movement inside the chamber, making incucell incubators ideal for the safe treatment of microbiological cultures. (1 per EA )

Interior Outlet:110V-1 Shelving:2 Supplied, Adjustable Agency Approval:TUV-CUE Temperature Control:0.1°C Display Increments Temperature Uniformity:+/- 0.5°C at 20°C Temperature Range:15°C to 40°C (at 20°C ambient) Exterior Dimensions WxDxH in. (cm):23.5 x 21.0 x 33.7 (59.7 x 53.4 x 85.6) Interior Dimensions WxDxH in. (cm):19.0 x 16.2 x 26.2 (48.3 x 41.1 x 66.5) Capacity:3 Cu.Ft. (85 L) Capacity of Standard B.O.D. Bottles:84 Maximum Energy Consumption (W):360/480 All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)

Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products assuring piece of mind to our customers. (1 per EA )

Incucell natural gravity convection microbiological incubators provide noiseless operation and gentle airflow along with exceptional temperature uniformity. The lack of a fan significantly reduces particle movement inside the chamber, making incucell incubators ideal for the safe treatment of microbiological cultures. (1 per EA )

MyTemp Mini Digital Incubator, with heating only 115V, EA /1 (1 per EA)

Borosilicate glass, type 1, class a 45 mm polypropylene screw cap provides secure seal Polypropylene pouring ring allows drip free pouring and protects rim Replacement cap: 5637-00045; pouring ring: 5637-10045 Area (cm2): 1585, OD x OAL: 110 x 570mm (1 per EA )

Interior Outlet:115V-1/230V-2 Shelving:5 Supplied, Adjustable Agency Approval:TUV-CUE Temperature Control:0.1°C Display Increments Temperature Uniformity:+/- 0.5°C at 20°C Temperature Range:15°C to 40°C (at 20°C ambient) Exterior Dimensions WxDxH in. (cm):30 x 31.5 x 69.5 (76.2 x 80.1 x 176.6) Interior Dimensions WxDxH in. (cm):25.5 x 24 x 54.5 (64.7 x 60.9 x 138.4) Capacity:19.3 Cu.Ft. (546 L) Capacity of Standard B.O.D. Bottles:300 Maximum Energy Consumption (W):660/840 All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ± 3)°C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time. (1 per EA)

Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 17x13" Size: 36l (1 per EA )

Stainless steel bottom base for extra strength includes four rubber feet for added stability. Carriers are dishwasher and oven safe. For use with 6L or 9L vessels or carboys. Material: stainless steel Dimensions: 2x11" Size: 15l (1 per EA )

Bellco Mini Roll-In Incubators have 21 cubic feet of volume and are designed for use with Bellco's Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Two internal convenience outlets. (1 per EA )