PPE Safety

POLYTEF items are food safe, reusable, waterproof, non-stick, flexible, tear resistant, low temp tolerant, washable and dryable. (200 per CS)

Featuring a vibrant tie-dyed pattern, these knee length coats are made of easy care 100% cotton. Coats feature one upper left breast pocket, two roomy lower pockets, side slit openings, and a sewn-down back belt. (1 per EA)

CTI’s SGPF Series are Sterile Gloves. Like all our gloves, they are manufactured for outstanding strength, stretch and fit. They offer a textured surface and are double chlorinated reducing contact sensitizers and protein content. SGPF Series gloves are lot traceable, 12" long and hand-specific. They have been tested to meet and/or exceed all standards and requirements. Available in sizes 6 to 10. (200 per CS )

Lightweight, sturdy bottle carrier provides economical means to transport up to six 1 Liter bottles (3 1/2” diameter or smaller). (5 per CS)

SOL-M Medical Procedure Face Mask The masks has earloop design – simple to wear – and pinch nose clip to freely adjust to the shape of the nose, increases face fit and provides a good seal around the face. Three-ply mask designed for protection and comfortable wearing experience: outer layers are made of non-woven fabric and the medium layer is made of melt-blown fabric. Intended to be worn by patients and other persons to reduce the risk of spread of infections. (2000 per CS )

CTI’s NPXO Series Nitrile Exam Gloves are manufactured for outstanding strength, stretch and fit. They are 100% nitrile offer textured finger tips, have a super soft feel and come in orange color. Our orange nitrile gloves are 10" long, ambidextrous, and have been tested to meet and/or exceed all standards and requirements. Available in sizes Small to XX-Large. (1000 per CS )

Modular Glove Box Holder, White (3 per PK )

Apron, Adult, Vinyl/Plastic, 35" X 45" (1 per EA )

TrippNT's Priced Right Single Tooth Glove Box Dispenser safely holds and dispenses gloves. Durable and strong bright white styrene construction is easy to clean. Can be placed on countertop or mounted to wall with included hardware. Availab (1 per EA )

CTI’s PFXT Series are Class 100 Gloves. Like all our gloves, they are manufactured for outstanding strength, stretch and fit. They offer a textured surface and are double chlorinated reducing contact sensitizers and protein content. PFXT Series gloves are ISO 5 Cleanroom compatible or higher for controlled environments. We offer them in both 10" and 12" long. They are ambidextrous, and have been tested to meet and/or exceed all standards and requirements. Available in sizes Small to X-Large. (1000 per CS )

Single Replacement Key for Goggle Cabinet (1 per EA )

5mil Textured Grip, Powder Free Gloves. Economical puncture resistance with great comfort, dexterity, and tactile sensitivity. Textured for better grip in wet or dry environments. Contains no natural rubber latex proteins. Beaded cuff. Ambidextrous. Single Use Only. Made from component materials in compliance with Federal Regulations for food contact 21CFR, 170-199. CFIA Approved. (900 per CS)

Vactrap™ 2 Vacuum Trap System (Vacuum Flask Alternative) for Aspiration and Vacuum Protection, Shatterproof 2 Liter Aspirator Bottle Assembly with Secondary Container, Autoclavable Polypropylene (PP), 2L Bottle with Inline Vent Filter, 1/EA (1 per EA)

5 mil Textured Grip, Powder Free Gloves. Economical puncture resistance with great comfort, dexterity, and tactile sensitivity. Textured for better grip in wet or dry environments. Contains no natural rubber latex proteins. Beaded cuff. Ambidextrous. Single Use Only. Made from component materials in compliance with Federal Regulations for food contact 21CFR, 170-199. CFIA Approved. (1000 per CS)

EZwaste® Secondary Container Spill Basin, Safety Tray for 20L-60L (5 to 15 Gallon) Carboys, Bottles, and DOT Waste Containers, 3/PK (3 per PK )

CTI’s NBC & HBC Series Spunbonded Polypropylene Bouffant Caps and Beard Covers are manufactured with the same outstanding quality as all of our other Scientific Division products. They are strong and durable, but made from a lightweight material that offers breathability and comfort. All items are individually inspected for quality and workmanship. (1000 per CS )

Safety Goggles - Direct Vent (1 per EA )

2.5mil Textured Grip, Powder Free Gloves. Economical puncture resistance with great comfort, dexterity, and tactile sensitivity. Textured for better grip in wet or dry environments. Contains no natural rubber latex proteins. Beaded cuff. Ambidextrous. Single Use Only. Made from component materials in compliance with Federal Regulations for food contact 21CFR, 170-199. CFIA Approved. (2000 per CS)

Natural rubber latex and compounding materials . Single use only Made in Malaysia Ambidextrous Beaded Cuff Textured Powder-Free Non-Sterile Tensile Strength: Minimum 18.0 Mpa( Before Aging) Palm thickness: 0.11mm (1000 per CS )

eShield® Sterile Cover - Cell Phone, Sterile (25 per CS )

CTI’s NCP Series Nitrile Class 100 Gloves are manufactured for outstanding strength, stretch and fit. They offer a textured surface and a super soft feel for comfort. NCP Series Class 100 Nitrile gloves ISO 5 Cleanroom compatible or higher controlled environments. They are 12" long, ambidextrous, and have been tested to meet and/or exceed all standards and requirements. Available in sizes Small to XX-Large. (1000 per CS )

Shoe Cover, Super Sticky, Color: White, 300/Case, 16 X 42 Cm, Size: Lg; 7 Lbs., CS/300 (300 per CS )

Bio-Bin Loop Model, 9x3x4.7" 2.5L CS/50 (50 per CS)

2.5mil Textured Grip, Powder Free Gloves. Economical puncture resistance with great comfort, dexterity, and tactile sensitivity. Textured for better grip in wet or dry environments. Contains no natural rubber latex proteins. Beaded cuff. Ambidextrous. Single Use Only. Made from component materials in compliance with Federal Regulations for food contact 21CFR, 170-199. CFIA Approved. (2000 per CS)