Thermometers

Therm ASTM Cert . Spirit Filled Cert at -35, 0, 50C (1 per EA)

Digital Economy Hygrometer/Thermometer W/Clock (1 per EA)

Digital Pt100 Platinum Thermometer, -100/300C and F X 0.1C and F (1 per EA)

Therm, Prec +50/300F X 2.0F, 160mm Length (1 per EA)

Digital Waterproof, T-Handle Thermometer, -58/302F and -50/150C, 4 1/2in Probe (1 per EA)

Thermometer, Dial, -40° to 160°F, 3" Diameter, 12" Stem Length (1 per EA )

Therm, Prec -1/201C X 0.2C (1 per EA)

Digital Lab Thermometer, -58/302F and -50/150C, 5in Stem, Cal at 0.2C and 0.5C (1 per EA)

Digital Deluxe Waterproof Pocket Thermometer. 31/2in Probe, -50/300C and -58/572F (1 per EA)

Therm, Prec -30/120F X 0.2F (1 per EA)

Therm, Prec -1/101C X 0.1C (1 per EA)

Lollipop Traceable Thermometer with ±1.0ºC (1 per EA)

Digital Lab Thermometer, -58/302F and -50/150C, 5in Stem (1 per EA)

Digital Lab Thermometer, Long Probe, -58/536F and -50/280C, 12in Stem (1 per EA)

Digital Time/Date Stamp Thermometer W/Audible and Visual Alarm For Incubators (1 per EA)

Therm, Prec Melting Point , Fisher-Johns, 0/160C X 1.0C (1 per EA)

Digital For Dry Blocks (High) (1 per EA)

Therm Bimetal Dial +50/300F X 2.0F (1 per EA)

Student-grade total immersion thermometer with dual scales and a temperature range of -20° – 150°C / 0° – 300°F. Contains a kerosene-based column with red dye. The thermometer measures 12" long with an outer diameter of 6-7mm. Full immersion thermometers need to be submerged deep enough so the desired temperature is at the meniscus. For example, if you wish to measure the temperature of a hot water bath to make sure it is 100°C, then you need to submerge the thermometer up to the 100°C mark. (1 per EA )

Therm Lab Bl Spirit Pocket Test, Alum Case -20 To 110C X 1.0C, Imm=Total 12in (1 per EA)

Digital Ir Thermometer, 50:1, -50/1000C and -58/1832F (1 per EA)

Thermometer, Dial, 25° to 125°F, 1"Diameter (1 per EA )

Therm ASTM Cert . Spirit Filled Cert at *-46, -32, -18, 0C (1 per EA)

Red spirit-filled thermometers provide increased safety and economic pricing. They contain a kerosene-based column with red dye, which is significantly safer than mercury. These thermometers all have 6 to 7mm outer diameters, and the bulbs have equal or smaller diameters than the stems. Partial immersion thermometers are useful if you have a shallow container which holds the substance to be measured. These thermometers have a small indicator ring that denotes the depth to which the thermometer should be submerged to obtain and accurate temperature reading. Full immersion thermometers need to be submerged deep enough so the desired temperature is at the meniscus. For example, if you wish to measure the temperature of a hot water bath to make sure it is 100°C, then you need to submerge the thermometer up to the 100°C mark. (1 per EA )