Supplies

Culture Vials With Rubber Lined Caps 12mL Screw cap size: 15-415. Microculture vials with deep-skirted Biogrip screw caps to allow safer more dependable handling when working with infectious materials. Caps have white (styrene-butadiene) rubber liner. Packed in convenient Lab File cases. (144 per CS )

0.1mL Polypropylene Vials Closure Size: 8-425mm Wheaton polypropylene vials are for use in most standard gas and liquid chromatography autosamplers. These lightweight economical vials are molded of polypropylene for good chemical resistance.

LVI Vial Borosilicate Glass Screw-Top Wheaton Vial consists of a 300'l limited volume tapered insert sealed in a 12x32mm ABC vial. Over-sized needle target area. Writing patch for sample identification. Fits most autosamplers. 10mm screw thread finish. Clear.

Sample Vials Clear. Packaged in Lab-File corrugated trays with partitions. Borosilicate glass. Solid-top black phenolic PTFE faced 14B rubber-lined screw-caps. Volume: 12mL. Vial size: 3dram. Dimensions: 19dia.x68Hmm. Cap size: 15-425. (144 per CS )

Sample Vials Clear. Packaged in Lab-File corrugated trays with partitions. Borosilicate glass. Solid-top black phenolic PTFE faced 14B rubber-lined screw-caps. Volume: 20mL. Vial size: 6dram. Dimensions: 28dia.x60Hmm. Cap size: 24-400. (72 per CS )

Sample Vials Clear. Packaged in Lab-File corrugated trays with partitions. Borosilicate glass. Solid-top black phenolic PTFE faced 14B rubber-lined screw-caps. Volume: 25mL. Vial size: 6-1/4dram. Dimensions: 28dia.x73Hmm. Cap size: 24-400. (72 per CS )

High Recovery Vials Wheaton E-Z Ex-Traction High Recovery Vials Are Ideal For Compound Management Applications. A Patent Pending Conical Well Design Ensures Maximum Recovery Of High Value Samples. These Vials Are Manufactured To Tight Tolerances . (250 per CS )

NextGen V-Vials have a new fire glazed bottom protects against glass particulates while the new low particulate packaging protects against contamination during transportation and storage. These sturdy vials have a conical interior bottom that allows for maximum retrieval of contents. (12 per CS )

Trumpet Coliwasas 200mL Disposable glass coliwasa is best suited where sludge or semi-solid material is sampled. The rigidity of the glass will aid boring through semi-solid sludge type materials. Liquid and sludge material will remain in the coliwasa due to its tight fluoropolymer resin seal. (12 per CS )

Coliwasa Samplers PVC Reusable Length: 121.9cm. Top spin bar and bottom valve plate mechanism produce a positive seal for sample retention. Provides control for releasing samples into containers. Modular design allows connection of several samplers. Chemically-resistant. 121.9cm cleaning brush. (1 per EA)

Scoop Stainless Steel Ideal for sampling powders slurries soils and more. The 2.54cm deep bowl is 8.9cm wide at widest point. Overall Length: 24.1cm. (4 per CS )

Small Sinker Small sinker for use with 2 and 3mm tubing. For use with Unispense uP Dispensers. (6 per CS )

Midi Cyanide Distillation Kit Component Parts Absorber tube For total cyanide analysis by midi distillation in water and soils. Method 335.2 CLP-M. The midi distillation method covers the determination of cyanide with a semi-automated colorimetric analysis of the distillate. (1 per EA)

Staining Dish 20-Slide This 20-slide unit is the standard for manual staining procedures. Removable glass slide rack has an open bottom for rapid immersing and draining of stain eliminating any carryover. The rack holds 20 slides of regular size. (3 per CS )

Staining Dish Cover50-Slide Slotted rack holds 50 microscope slides sizes 3in.x1in. (75x25mm) as well as 3in.x1 1/2in. (75x38mm) and 3in.x2in. (75x51mm). Unit measures approximately 200x83x105mm overall. Rack is made of non-tarnishable stainless steel and is resistant to most staining solutions.

Septum fluoropolymer resin-faced gray butyl. A special molded seal with fluoropolymer resin insert. Sealing surfaces of butyl and fluoropolymer resin effect a more positive seal than plain fluoropolymer resin-faced septum. For mouth OD: 20mm. (100 per CS )

Red Aluminum Seal One-Piece Shelf packs of 100. Fits GPI finish: 11mm.

Standard Aluminum Seal One-Piece Shelf packs of 100. Fits GPI finish: 20mm. (1000 per CS )

Aluminum Seal Blue. Center disc tear-out. Unlined. One-piece center disc tears out exposing top of stopper to syringe. Shelf packs of 100. For mouth OD: 13mm.

Aluminum Seal Tear-off. Green. Stopper can be punctured by syringe or seal can be completely removed and contents poured from bottle. Shelf packs of 100. For mouth OD: 13mm. (1000 per CS )

Aluminum Seal Tear-off. Green. Stopper can be punctured by syringe or seal can be completely removed and contents poured from bottle. Shelf packs of 100. For mouth OD: 20mm.

Aluminum Seal Tear-off. Stopper can be punctured by syringe or seal can be completely removed and contents poured from bottle. Shelf packs of 100. Standard. For mouth OD: 30mm.

Aluminum Seal with PTFE/Red Rubber Liner For mouth OD: 11mm. Red. (1000 per CS )

Aluminum Seal Center disc tear-out. fluoropolymer resin/red rubber septum. Faced with 2 mil fluoropolymer resin film. For filling or emptying contents with a syringe. Shelf packs of 100. Standard. For mouth O.D.: 13mm.