Supplies

This buret has a clear acrylic body and leakproof stopcock with a self lubricating PTFE plug. Acrylic body is resistant to dilute mineral acids and bases except Hydrofluoric Acid and Ammonium Hydroxide. Graduations are in 0.1ml increments. (1 per EA)

Porcelain casserole with 175ml capacity, featuring lip and handle. Casserole measures 45mm tall with a 90mm top outside diameter. Glazed inside and out. (1 per EA)

Good quality natural black bristles, mounted in twisted heavy gauge galvanized wire. Includes a radial top. (1 per EA)

Good quality nylon bristles, mounted in twisted heavy gauge galvanized wire. Includes a radial top. (1 per EA)

Unibody construction from Type 304 stainless steel. Can withstand temperatures from -180°C to 800°C. Covers included. (1 per EA)

Round form evaporating dishes include lip. Glazed inside and outside on both sides, except for large dishes (greater than 385 ml) which are glazed inside and partially outside. (6 per PK )

Borosilicate glass flasks are designed to give the best combination of thermal shock resistance and physical strength. Feature 24/40 jointed sockets and graduations in durable white enamel. (2 per PK )

One of each #FPPC35, #FPPC52 and #FPPC65 (1 per EA)

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

All-in-one pipettes are molded from unbreakable translucent low-density polyethylene (LDPE). Can be sealed and refrigerated. (100 per PK )

Tall form, unglazed, 99.7% alumina crucible. Maximum use temperature is 1750°C. (1 per EA)

Wide mouth flasks are ideal for titrations and culture work. Borosilicate glass flasks are designed to give the best combination of thermal shock resistance and physical strength. Feature heavy-duty rims and graduations in durable white enamel. (6 per PK )

These sterile PETG (polyethylene terephthalate glycol) Erlenmeyer flasks are used for mixing, containing, and storing solutions. PETG flasks are very clear and have easy to read graduation marks. These are shatterproof and are an ideal alternative to glass. Temperature range is -40 to 70° C (-40 to 158° F). (24 per PK )

Made from clear flint glass (1.8 to 2.0 mm thick), fine ground and polished edges. (12 per PK )

BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5-day biochemical oxygen demand (BOD) test. Bottles are numbered to allow for convenient organization of samples. 300ml bottles also incl (24 per PK )

Glazed on inner and outer surfaces except for outside bottom surface. (1 per EA)

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

Beaker tongs feature strong zinc-plated steel construction with flat riveted joints and vinyl coated sleeves that open to 7".  Tongs can handle beakers from 50ml to 1500ml capacity.  Overall length is 9.75".  (1 per EA)

Rubber policeman attached to glass rod facilitates scraping and mixing. Stirring rods are made of soft flint glass, with both ends fire-polished and rounded. Policemen are made of natural rubber. Pre-assembled. (12 per PK )

Replacement 300ml borosilicate glass funnel designed for use with Vacuum Filter Holder Set with PTFE Coated Funnel and Base (FHPT47). (1 per EA)

Replacement 2000ml borosilicate glass bottle with ground glass joints, designed for use with Vacuum Filter Holder Set (FHSS90). (1 per EA)

200mm Graham condenser is designed for use in distillation applications. Constructed of borosilicate glass, this condenser has a coiled inner tube to provide additional surface area for highly efficient cooling. Socket is 24/40 with a screw thread connector. (1 per EA)

This silicone flask stand can support round bottom flasks as large as 2000 mL, as well as other items like beakers and dishes. The stand has 12 molded-in steps to provide a secure grip for a wide range of flasks. The silicone material that is heat resistant to 250°C. Flask stand has a diameter of 16 cm and is 5 cm tall. (1 per EA )

Cylinders comply with ASTM E-1272, Class A standards, batch certified. Double metric scale, calibrated to contain. Borosilicate glass cylinders with pour spouts feature heavy uniform wall tubing and strong, stable, hexagonal bases. All cylinders come with (1 per EA)