Supplies

NMR Sample Tube Pressure Caps Polyethylene Assorted Colors for 5 and 10 mm Tubes Fits Tube Size (mm) 5. Color Yellow A tight-fitting polyethylene cap which stays in place even with a build-up of internal vaporization pressures. (100 per CS )

HPLC Delivery Cap Three Hole ULTRA-WARE Cap Thread GL 45 Three holes have 1/4-28 threads top and bottom with 1/8 I.D. holes through to accept 1/8 O.D. PTFE tubing. Body is PTFE. Supplied complete with three 1/4-28 CTFE plugs and a TFE/propylene o-ring. (1 per EA)

HPLC Cap System Economy 3-Hole ULTRA-WARE Size Economy 3-Hole Cap System with 2 Liter Reservoir The cap body is manufactured from PTFE and is supplied with a TFE/propylene o-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. (1 per EA)

Flasks Boiling Round Bottom Heavy Wall Capacity (ml) 250. [standard taper] Joint 29/42. Approx. Dia. (mm) 83 Single neck flask with a [standard taper] outer joint. (1 per EA)

Flasks Distilling Three Neck Round Bottom Heavy Wall Capacity (mL) 1000. Center [standard taper] Joint 29/42. Side [standard taper] Joints 24/40. Approx. Dia. (mm) 130 Three neck round bottom flask with [standard taper] outer joints. Side necks are vertical. (1 per EA)

Flasks Distilling Three Neck Round Bottom Heavy Wall Capacity (mL) 1000. Center [standard taper] Joint 24/40. Side [standard taper] Joints 24/40. Approx. Dia. (mm) 130 Three neck round bottom flask with [standard taper] outer joints. Side necks are angled. (1 per EA)

Flasks Distilling Four Neck Round Bottom Heavy Wall Capacity (mL) 1000. Center [standard taper] Joint 24/40. Side [standard taper] Joints 24/40. Approx. Dia. (mm) 130 Four neck round bottom flask with [standard taper] outer joints all vertical. (1 per EA)

Funnels Addition [standard taper] 24/40 Joints with Glass Plug Capacity (mL) 250. [standard taper] Joints 24/40. Replacement Stopcock Plug 801001-0002. Approx. Height (mm) 345 Cylindrical funnel has a pressure equalizing line and a glass stopcock. (1 per EA)

Funnels Separatory Glass Plug with Stopper Capacity (mL) 60. [standard taper] Stopcock 2. Stem O.D. (mm) 8. Approx. Overall Height (mm) 185 Squibb-type with a [standard taper] joint and stopcock. Plain stem but may be used with a 179800 Universal Adapter. (1 per EA)

Funnels Weighing / Transfer Funnel GPI Thread Size 13-425. Approx. Overall Height x Width (mm) 13 x 45 Designed for use with KONTES micro volumetric flasks. Ideal for the easy transfer of liquids or powders. Flat bottom allows weighing. (1 per EA)

Funnels Weighing / Transfer Funnel GPI Thread Size 20-400. Approx. Overall Height x Width (mm) 22 x 50 Designed for use with KONTES micro volumetric flasks. Ideal for the easy transfer of liquids or powders. Flat bottom allows weighing. (1 per EA)

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware Support Type Fritted Glass. Graduated FunnelCapacity (mL) 15. Filter Size (mm) 25. Approx. (1 per EA)

Filtration Microfiltration Assembly 25 mm with Stainless Steel Support Ultra-Ware Support Type Stainless. Graduated FunnelCapacity (mL) 15. Filter Size (mm) 25. Approx. (1 per EA)

Funnel/Support Assembly 47mm Glass Support For use with Millipore filtering manifolds. With coarse fritted-glass support base 300mL graduated funnel aluminum clamp number 8 silicone stopper. Clamp sandwiches filter between funnel and base. 35mm prefilter. 9.6cm2 filter area. (1 per EA)

Filtration Microfiltration Assembly 47 mm with Glass Support Ultra-Ware Glass Funnel 47 mm 100 mL Capacity These vacuum microfiltration assemblies are designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. (1 per EA)

Filtration Microfiltration Assembly 47 mm with PTFE-Faced Fritted Glass Support Ultra-Ware (1) PTFE-Faced Glass Funnel 47 mm 300 mL Used when autoclaving with the filter in place. The PTFE coating prevents the membrane from adhering to the ground glass surface. (1 per EA)

Filtration Microfiltration Assembly 90 mm with Fritted Glass Support Ultra-Ware (1) Glass Funnel 90 mm1000 mL The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. (1 per EA)

ULTRA-WARE Funnel/Support Assembly 47mm Stainless Steel Support Mounts in Millipore filtering manifolds. Removable 316 stainless screen filter support. Aluminum clamp sandwiches filter between funnel and base. With 300mL funnel. Diameter: 76mm. Height: 229mm. (1 per EA)

Vials Micro-Vial Autosampler KG-33 Borosilicate Glass Screw Thread Ungraduated with Open Top Closure and PTFE-Faced Silicone Septum ACCUFORM. Cap. (mL) 2. O.D. (mm) 21. Length (mm) 40. GPI Thread Finish 20-400 12x32 mm size is designed for use with Varian and other autosamplers.

KIMAX Sample Vial KG-33 borosilicate glass. With PTFE-lined solid-top screw caps attached to vials. Capacity: 12ml. OD x Length: 19x67mm. GPI thread finish: 15-425. (144 per CS )

Vials EPA Water Analysis Screw Thread KG-33 Borosilicate Glass without Closure Cap. (mL) 30. O.D. (mm) 28. Length (mm) 70. GPI Thread Finish 24-400 (432 per CS )

Vials EPA Water Analysis Screw Thread Amber 203 Borosilicate Glass without Closure Cap. (mL) 40. O.D. (mm) 28. Length (mm) 95. GPI Thread Finish 24-400 (432 per CS )

Vials EPA Water Analysis Screw Thread KG-33 Borosilicate Glass Assembled Cap. (mL) 40. O.D. (mm) 28. Length (mm) 98. GPI Thread Finish 24-400 Vials include PTFE-faced 14B white rubber liners and solid top closures attached.

OPTICLEAR Vial N-51A borosilicate glass with polyethylene stopper. Open-bottom stopper. Ordering Information: Packaged in Lab Pack cartons. Capacity: 3.7mL. O.D.xLength: 15x45mm. (864 per CS )