Supplies

Tube,Cent,Disp,S/C Finish, 15ml (1 per EA )

Aluminum Seal Tear-Out Allows for easy access to septa. Fits GPI finish: 20mm. (1000 per CS )

Tissue grinders Potter-Elvehjem PTFE Pestle and Glass Tube Tube Similar to 885500 but with a PTFE pestle and an unground tube. Sizes 21 to 24 have radial serrations on the lower portion of the pestle to deliver the homogenate into the cylindrical portion of the tube. (1 per EA)

Tissue grinders Potter-Elvehjem PTFE Pestle and Glass Tube Tube Similar to 885500 but with a PTFE pestle and an unground tube. Sizes 21 to 24 have radial serrations on the lower portion of the pestle to deliver the homogenate into the cylindrical portion of the tube. (1 per EA)

Caps closures Screw Thread White Urea with PTFE-Faced Foam Backed (F-2170) Liner GPI Thread Finish 13-425 (432 per CS )

Black Phenolic Cap 38-400 with a pulp/tinfoil liner. Caps are sold 144 per case in 12 bags of 12. (144 per CS )

Stoppers Glass Hollow Hex Head [standard taper] Full Length [standard taper] Joint 24/40 Hollow hexagonal head [standard taper] stopper. May be set on the flattened top to avoid contamination of the ground surface. (1 per EA)

ULTRA-WARE Flask Cap For use with ULTRA-WARE Microfiltration Apparatus. Standard tape. 40/35 outer joint. (1 per EA)

KONTESbrand HPLC Cap System Economy 3-Hole Cap Only ULTRA-WARE. The cap body is manufactured from PTFE and is supplied with a TFE/propylene o-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of the ports have 1/8 through holes the third port h (1 per EA)

TITESEAL Shell Vial with Plug-Style Cap Clear N-51 borosilicate glass. With plug-style polyethylene needle closures. Vials and caps packed separately. Vials are shrink-wrapped trays of 200 caps are bulk-packed in plastic bags. Capacity: 1ml. ODxLength: 8x43mm. (2000 per CS )

KIMAX Sample Vial KG-33 borosilicate glass. With PTFE-lined solid-top screw caps attached to vials. Capacity: 4ml. OD x Length: 15x47mm. GPI thread finish: 13-425. (144 per CS )

KIMAXbrand Sample Vial Clear KG-33 Borosilicate Glass Screw Thread with Black Phenolic Polyseal Cone Closure Attached Capacity (mL) 40 O.D. (mm) 28 Length (mm) 98 GPI Thread Finish 24-400. (72 per CS )

Caps closures for Scintillation Vial White Polyethylene GPI Thread Finish 22-400 Replacement cap for 74511 only. Closure is made from white polyethylene and is linerless. Top is suitable for marking. Closures are packed 100 pieces per plastic bag 10 bags per case.

Filtration Microfiltration Apparatus 90 mm with Stainless Steel Support Ultra-Ware 90 mm Filtration Apparatus with S.S. (1 per EA)

HPLC ULTRA-WARE Fittings Kit THF-Resistant Fittings Kit Standard Version This kit contains all of the tube fittings adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons. (1 per EA)

HPLC Inlet Filter Solvent Stainless Steel ULTRA-WARE O.D. x Length 7/8 x 1 1/2 Ten micron porosity filter with an ETFE nut and ferrule for connection to 1/8 O.D. PTFE tubing. A CTFE hose barb adapter for connection to 1/4 O.D. (5/32 I.D.) tubing is also included. (1 per EA)

Tubes Coliwasa Glass Capacity (mL) 200. Approx. O.D. (Inches).875. Approx. Length (Inches) 42 The two-part borosilicate glass tube has a ball in the lower end which acts as a check valve to prevent sample loss during transfer.

Labsets kits Organic Chemistry Microscale Thermoplastic Connectors Williamson Improved Standard Item V Stir Bars 4x12 mm 2 per vial These MICROFLEX Kits feature the patented chaste connectors and specially tooled glassware components providing great versatility. (12 per CS )

Vacuum airless Bubbler Gas Body O.D. (mm) 25. Approx. Overall Height x Width (mm) 185 x 80 Used with mineral oil to observe gaseous addition to reactions. May be used to vent a reaction mixture to the atmosphere. Tubing connections are 8 mm O.D. (1 per EA)

KONTESbrand NMR Tube 10 mm Borosilicate Glass Wilmad Equivalent xxxxxx Approx. Mhz >150 Length Inches 8 Wall Thickness 0.0182 Wall Variation T.I.R. 0.0020 Camber T.I.R. 0.0010. Supplied with a polyethylene cap and features a sandblasted marking spot for easy sample identification. (1 per EA)

Testing Jar Clear Capacity:2 oz with attached 43-400 black phenolic closure with poly-vinyl liner. (216 per CS )

Purge and Trap Sparger U-Shaped with EPA Method 603 Dscription Sparger Fritted 25 mL These U-shaped spargers are designed for use on the Tekmar 2000 and 3000 Purge and Trap Concentrators when doing EPA Method 603 and using either an AQUATek 50 or ALS 2050 Vial Autosampler. (1 per EA)

Prelabeled Culture Tube Disposable. Borosilicate glass. For use in cell washers and water baths as writing on label is permanent. Fused-on white label provides ideal surface for marking. Label size is 19x34.9mm. Tube size is 10x75mm. Volume: 3mL. (1000 per CS )

KIMAX Culture Tube Disposable. Borosilicate Glass. Features smooth top and bottom to prevent cuts. Annealed to reduce breakage along stress points. Supplied in shrink wrapped trays to eliminate breaking and contamination. Sizemm: 12x75. Volume: 6ml. (1000 per CS )