Supplies

Hydroblokr™-serological-pipette-protection-device, Female Slip Male Slip 0.22um, 100/pk (100 per PK )

Hydroblokr™-serological-pipette-protection-device, Female Slip Male Slip 0.22um, 10/pk (10 per PK )

Hydroblokr™-serological-pipette-protection-device, Female Slip Male Slip 0.22um, 25/pk (25 per PK )

MFS/Advantec Equivalent: 25AS045AS (100 per PK )

MFS/Advantec Equivalent: 25CS020AN (100 per PK )

Ahlstrom Equivalent: 1610-0425 Environmental Express (CP) Equivalent: FG85037MM (100 per PK )

Cytiva/Whatman Equivalent: 1827-110 Ahlstrom Equivalent: 1690-1100 MFS/Advantec Equivalent: GC50110MM Sartorius: FT-3-01147-110 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

Cytiva/Whatman Equivalent: 1827-035 MFS/Advantec Equivalent: GC5035MM (100 per PK )

Environmental Express (CP) Equivalent: FQ037MM (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents, MFS/Advantec Equivalent: GC-50 110MM (100 per PK )

Cytiva/Whatman Equivalent: 1821-025 Pall Equivalent: 66198 Millipore Equivalent: APFB 025 00 Ahlstrom Equivalent: 1210-0250 MFS/Advantec Equivalent: GB14025MM Sartorius: FT-3-1102-025 (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 37MM (100 per PK )

Cytiva/Whatman Equivalent: 1827-125 Ahlstrom Equivalent: 1690-1250 MFS/Advantec Equivalent: GC50125MM Sartorius: FT-3-01147-125 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

MFS/Advantec Equivalent: 13CP045AS (100 per PK )

Unlike traditional polymeric cast film membranes, H&V Trupor® utilizes nanoscale fibers in a composite design to achieve precisely regulated porosities. This innovative design yields best in class performance. No adhesives are utilized which significantly reduce trace extractables making it an ideal matrix for analytical separation (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 35MM (100 per PK )

Ahlstrom Equivalent: 1610-0700 MFS/Advantec Equivalent: GC5070MM (100 per PK )

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK )

Cytiva/Whatman Equivalent: 1827-150 Ahlstrom Equivalent: 1690-1500 MFS/Advantec Equivalent: GC50150MM Sartorius: FT-3-01147-150 (100 per PK )

Electrophoresis blotter cards, double thick, 7.5x10cm, 50 pack, PK50 (50 per PK )

Cytiva/Whatman Equivalent: 1851-865 Pall Equivalent: 7204 (100 per PK )

Ahlstrom Equivalent: 1510-1500 MFS/Advantec Equivalent: GF75150MM Sartorius: FT-3-1105-150 Environmental Express (CP) Equivalent: FG75150MM (100 per PK )