Supplies

This SAN, bright red paddlewheel flow meter indicates liquid or gas flow from 5 ml/sec to 95 ml/sec. The clear outer case allows for unobstructed view of the wheel which spins freely with flow. Paddlewheel flow indicator is not for use with corrosive fluids or temperature over (185°F) 85°C. Can be used to connect tubing I.D. of 1/4” to 7/16” (6 - 11 mm) I.D. (5 per CS)

Ladle/Scoop, HDPE 100mL (12 per CS)

Clear acrylic Refrigerator-Freezer Storage Tube Racks for storage of 16mm specimen tubes for refrigerator or freezer. Refrigerator freezer tube rack allows sufficient space for labeling of individual specimen tubes. Rack is sized to utilize available space efficiently and have hand grips. (1 per EA)

Large, medium weight approximately 1/2 gallon scoop capacity. Bowl size is 8” diameter x 9 1/2” with long 7” handle. (1 per EA)

Test Tube Stoppers Red, LDPE 15-17mm (1000 per CS)

Tubing Connector 4 Way, PP 8mm (100 per CS)

Stopcock discharge cocks fits all containers with G 3/4" connection threads. Thread adapters facilitate connection of stopcocks to nearly all containers. Hose nozzles supplied as accessories ranging from 4 to 16mm ID. (1 per EA)

Wide-necked plastic jerrycan with an extremely wide filling opening (88 mm). Plastic carboy is asy to clean on the inside which is particularly important when storing sensitive substances. Carrying handles and screw lid guarantee safe and convenient transport. (1 per EA)

Plastic graduated cylinders feature either permanently molded or printed crisp blue graduations* that will not fade after repeated autoclaving. (8 per CS)

PTFE sampler-ladle is made from pure Polytetrafluoroethylene and is supplied with a fixed 6” (150mm) handle. (4 per CS)

The squat cylinder design makes these translucent polypropylene products more stable on the bench than traditional glass or plastic cylinders and results in fewer spills or more serious accidents. Squat cylinders are easier to handle, particularly in confined spaces such as fume hoods. The lower form means you require less overhead storage space. Not only are the graduations molded into the product, but they are also overprinted in attractive Azlon blue ink. And these cylinders have a unique self draining base that will allow waste-water to drain when inverted in a dishwasher - a first from Azlon! (5 per CS)

These polyethylene quick disconnects are useful for joining tubing of glass, rubber, or plastic. Plastic Tubing Disconnects fit tightly together. They are tapered to accommodate a range of diameters. Replaces expensive adapters. (100 per CS)

Heavy plastic spill containment trays are fabricated with 3/16” thick polypropylene or 1/4”high density polyethylene and feature an all welded construction. Dimensions listed are inner (I.D.). (1 per EA)

Container are HDPE except 8, 16, 32 oz natural and white, and 83 oz natural, which are PPCO, a copolymer of Polypropylene and High Density Polyethylene. PPCO offers a product with a higher temperature range while maintaining good impact strength. Recycling code is "5" for PP and the HDPE recycling code remains “2” (100 per CS)

Evaporating Dish Low Form, PTFE 180mL (1 per EA)

Plunger dispensing bottle is excellent for use with food products, cleaners, waxes and hand soaps. Supplied with 1 gallon HDPE bottle and standard plunger that dispenses 1 fluid ounce per stroke. Dispenser can be taken apart for cleaning. (12 per CS)

Plastic Griffin style beakers are for general laboratory use. Polypropylene griffin beakers will withstand temperatures up to 135°C and polymethylpentene beakers can withstand temperatures as high as 180°C for short intervals. (1 per EA)

Stir Bar Oct Yellow, PTFE 0.3125 x 1" (12 per CS)

Slide staining tray and jar are molded of glass-clear PMP. These slide staining jars are for use with Catalog Number 235405 slide staining dish and come supplied with 2 lids. (4 per CS)

Unbreakable plastic scintillation vials have a special grade of high density polyethylene to achieve the best counting efficiency with lowest background. Plastic vials are compatible with all liquid scintillation counters. Heavy walled to minimize solvent losses. (2000 per CS)

Dipper Sampler, PTFE 1000mL (1 per EA)

Dipper Samplers Sterile CS/50, PS 30mL (50 per CS )

Stirring Rod, PP 245mm (70 per CS)

Stir Bar Color Coded Kit, PTFE (1 per EA)