Supplies

Carboy, MultiCan EVOH Barrier TE Cap 20L (1 per EA)

Cuvette Cap Square, LDPE 19mm (1000 per CS)

Rack Test Tube 3 Tier 12 Place, PP (5 per CS)

Fabricated round plastic trays of polypropylene are heavy wall (3/16”), corrosion resistant and may be autoclaved. Fabricated trays of polyethylene are heavy wall (3/16”), corrosion resistant and durable. Dimensions listed are inner (I.D.). (1 per EA)

Carboy, MultiCan EVOH Barrier TE Cap 5L (1 per EA)

Spatula, PTFE 5x30x240mm (1 per EA)

Lightweight, sturdy bottle carrier provides economical means to transport up to six 1 Liter bottles (3 1/2” diameter or smaller). (5 per CS)

Slide staining tray and jar are molded of glass-clear PMP. These slide staining jars are for use with Catalog Number 235405 slide staining dish and come supplied with 2 lids. (4 per CS)

Polypropylene Stirrers Centrifugal blades. 100mm blade width fully extended. Blades are made of chemically resistant polypropylene and are fixed to a PVC-covered steel steel rod that is 8mm diameter x 350mm long. Clockwise motion directs flow upward. (1 per EA)

Droppers Bellow, LDPE 5.0mL (100 per CS)

Jerrycan, WM w/o thread w/cap HDPE 5L (1 per EA)

These heavyweight (4 mil & 2 mil) polyethylene plastic zipper bags are ideal for collecting, storing and protecting laboratory specimens and samples easily and conveniently. Sealed zipper bags keep dust out. Not suggested for use with liquids. Many uses in the lab and industry. Bags lock easily and securely with the zipper locking feature. (1000 per CS)

Heavy plastic dispensing trays are fabricated with 1/4” thick high density polyethylene. All welded construction featuring a spigot with 0.625" spout O.D. that will lock in the open position when the tab is flipped up, or can be used alternately by holding down the tab. (1 per EA)

Funnel Disc for Buchner, HDPE 42.5mm (50 per CS)

QuickMist reusable hand sprayer bottle. Trigger-type operation to provide fine mist with large pattern. Trigger assembly chemically resistant polypropylene with plastic strainer. (24 per CS)

Jerrycan Compact w 0.75" Thread, PP 5L (1 per EA)

This white cutting board series is Made in the USA with an easy-to-clean surface. HDPE cutting boards provide excellent surface for examining specimens, cutting, dissecting, etc. NSF, FDA and USDA approved material. (1 per EA)

General purpose plastic vial containers with push-in friction fit hinged lids. Lightweight, wall thickness approximately 1mm. Plastic LDPE Vials withstand temperatures up to 80° C. (100 per CS)

Pipettor holders are made from clear acrylic or high density polyethylene. This pipettor holder accommodates most major brands of pipettors making it a useful addition to any laboratory. The pipettor holder comes in three standard sizes for 3, 4 or 6 pipettors. (1 per EA)

These heavyweight (4 mil & 2 mil) polyethylene plastic zipper bags are ideal for collecting, storing and protecting laboratory specimens and samples easily and conveniently. Sealed zipper bags keep dust out. Not suggested for use with liquids. Many uses in the lab and industry. Bags lock easily and securely with the zipper locking feature. (250 per CS)

Bottle WM Graduated, PP 1000mL (6 per CS)

High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight but durable. (1 per EA)

Three-way Valve, PP/PE 9-11mm (1 per EA)

Flat bottom volumetric plastic scoops are molded of autoclavable Polypropylene and shaped conveniently for sampling solids or liquids. Flat bottom scoops with beveled angles for easy cleaning. Marked in milliliters. (2 per CS)