Supplies

Code: 100-R-YL EPP-TIP 1-100UL YEL PK1000Bio Plas replacement pipet tip for Eppendorf 1-100uL yellow 250 tips/rack. (1000 per PK)

Strips of hinged attached caps prevent accidents common with separate caps. Optically-clear, flat caps for qPCR. Uniform thin walls. For use in pharmaceutical industry, food industry, and molecular biology. • Manufactured from high-quality, virgin polypropylene to ensure purity and provide excellent optical clarity. Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free (1200 per CS)

Code: 1000-B-BL Replacement Pipet Tip For Oxford pipettors. Volume range: 250-1000uL. Color: blue. Made from virgin non-wettable polypropylene. (10000 per CS)

Code: 100-B-YL (10000 per CS)

Uni-Flex® Safety Caps Benefits: • Will not aerosol when opened • 10, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes • Liquid tight seal prevents sample evaporation. The UniFlex® Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. • Easy identification of samples: Uni-Flex® Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors • The Uni-Flex Safety Cap locks securely onto the outside of the tube lip to prevent evaporation. • Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. • Easy to label: Write directly on the cap with indelible ink • Clear, natural colored caps are tracemetal free (1000 per PK)

For a more economical purchase, the Histo Plas™ disposable, polypropylene Tissue Processing Capsule is the answer. The one piece unit is hinged, perfectly aligned and easy to use. Simply place the tissue in the Capsule and press the cover down to lock securely. The open mesh construction affords maximum fluid exchange during processing and the durable marking surface assures permanent identification. To embed from the capsule we recommend the tissue Embedding Ring system. (5000 per CS)

Strips of hinged attached caps prevent accidents common with separate caps. Optically-clear, flat caps for qPCR. Uniform thin walls. For use in pharmaceutical industry, food industry, and molecular biology. • Manufactured from high-quality, virgin polypropylene to ensure purity and provide excellent optical clarity. Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free (120 per PK)

Strips of hinged attached caps prevent accidents common with separate caps. Optically-clear, flat caps for qPCR. Uniform thin walls. For use in pharmaceutical industry, food industry, and molecular biology. • Manufactured from high-quality, virgin polypropylene to ensure purity and provide excellent optical clarity. Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free (1000 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)

96 Well Microcentrifuge Tube Rack, Pink, PK5 (5 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Code: 1000-B-GR Replacement Pipet Tip For Finnpipette pipettors. Volume range: 200-1000uL. Color: green. Made from virgin non-wettable polypropylene. (10000 per CS)

Uni-Flex® Safety Caps Benefits: • Will not aerosol when opened • 10, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes • Liquid tight seal prevents sample evaporation. The UniFlex® Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. • Easy identification of samples: Uni-Flex® Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors • The Uni-Flex Safety Cap locks securely onto the outside of the tube lip to prevent evaporation. • Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. • Easy to label: Write directly on the cap with indelible ink • Clear, natural colored caps are tracemetal free (10000 per CS)

Flat Top Microcentrifuge Tube 1.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 1.5mL. Rainbow color. (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

MICROCENT.TUBES 0.5ML ORNPK500Bio Plas flat top microcentrifuge tube 0.5 ml orange. (500 per PK)

5mL Flat Top Microcentrifuge Tube (4 bags of 50 tubes per pack), Assorted*, PK200 (200 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)

MICROCENT.TUBES 1.5ML REDPK500Bio Plas flat top microcentrifuge tube 1.5 ml red. (500 per PK)

Tissue is taken from the capsules and placed into stainless steel or plastic base molds. The labeled Embedding Ring is placed atop the base mold, filled with paraffin and cooled. The rings allow for a uniform block and are readily identified when filled. Available in 3 colors for color coding in the laboratory. (500 per PK)

MICROCENT.TUBES 0.5ML BLUPK500Bio Plas flat top microcentrifuge tube 0.5 ml blue. (500 per PK)

64 Well Microcentrifuge Tube Rack, Black, PK5 (5 per PK)