Supplies

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per PK)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per PK)

Code: 200-R OXF-SL TIP 1-200UL NAT PK1000Bio Plas replacement pipet tip for Oxford Slimline 1-200uL natural 250-well rack. (1000 per PK)

Snap-Cap Microcentrifuge Tube Volume: 1.5mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: blue. (1000 per PK)

G-Tube Flat-Top Microcentrifuge Tubes Size: 2.0mL. No special locking cap devices needed. Highest impact tube strength with over 30000xg. Transparent. Molded from siliconized virgin polypropylene for extremely low surface adhesion and maximum sample recovery. Natural. (500 per PK)

MICROCENT.TUBES 0.5ML GRNPK500Bio Plas flat top microcentrifuge tube 0.5 ml green.

PCR Tube Rack 96 well prep rack for PCR thin-walled tubes. Polypropylene. Conical shaped wells. Autoclavable. Holds 0.5mL microcentrifuge tubes. Lid included. 5 racks per pack. Fluorescent green. (5 per PK)

PCR Tube Rack 96 well prep rack for PCR thin-walled tubes. Polypropylene. Conical shaped wells. Autoclavable. Holds 0.5mL microcentrifuge tubes. Lid included. 5 racks per pack. Fluorescent pink. (5 per PK)

TH WALL MIC TB 0.5ML BL PK1000Bio Plas 0.5mL conical thin-wall tubes with attached cap for thermal cycling procedures blue. (1000 per PK)

Uni-Flex® Safety Caps Benefits: • Will not aerosol when opened • 10, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes • Liquid tight seal prevents sample evaporation. The UniFlex® Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. • Easy identification of samples: Uni-Flex® Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors • The Uni-Flex Safety Cap locks securely onto the outside of the tube lip to prevent evaporation. • Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. • Easy to label: Write directly on the cap with indelible ink • Clear, natural colored caps are tracemetal free (1000 per PK)

TUBEMCFLTTPG0.6MLO500PKBio Plas G-tube flat top microcentrifuge tube 0.6mL orange. (500 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 2.0mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 2.0mL. Blue color. (500 per PK)

Snap-Cap Microcentrifuge Tube Volume: 1.5mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: red. (1000 per PK)

Siliconized 0.5mL Flat Top Microcentrifuge Tube - Sterile, Individually Wrapped (250 per PK)

Siliconized 1.5mL Flat Top Micro Centrifuge Tube (500 per PK)

64 PLAC MIC RAC POL NAT. PK5Bio Plas 64-well micro tube rack natural for Bio Plas 0.5mL 1.5mL and 2.0mL screw cap and snap cap microcentrifuges. (20 per CS)

Snap-Cap Microcentrifuge Tube Volume: 500uL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: natural. (10000 per CS)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)

8/STRP F/.2ML-M-TB BL PK1000Bio Plas thin-wall tubes for thermal cycling procedures 0.2 ml blue. (125 per PK)

TH WALL MIC TB 0.5ML YE PK1000Bio Plas 0.5mL conical thin-wall tubes with attached cap for thermal cycling procedures yellow. (1000 per PK)

Snap-Cap Microcentrifuge Tube Volume: 400uL. Tough virgin polyethylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: natural. (1000 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Pestle in 0.6mL G-Tube™ (Blue Pestle/Natural Tube) (10 per PK)

G-Tube Premium Flat Top Microcentrifuge Tube 0.6mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps. Non-wettable walls. Amber color. (500 per PK)