Supplies

50mL Self-Standing Conical Tube, Sterile, Clear, PK50, CS500 (500 per CS)

0.2mL Thin Wall Micro Tube - 12 Tubes/Strip, Natural, CS1200

Engineered for unparalleled durability, BioFlex® PermaFrame TM PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms. (100 per CS)

Engineered for unparalleled durability, BioFlex® PermaFrame TM PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms. (100 per CS)

PermaFrame 96-Well Full-Skirt 0.1mL PCR Plate, Clear Wells, Assorted, PK10, CS100 (100 per CS)

Engineered for unparalleled durability, BioFlex® PermaFrame TM PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms. (100 per CS)

Tissue is taken from the capsules and placed into stainless steel or plastic base molds. The labeled Embedding Ring is placed atop the base mold, filled with paraffin and cooled. The rings allow for a uniform block and are readily identified when filled. Available in 3 colors for color coding in the laboratory. (5000 per CS)

Uni-Flex® Safety Caps Benefits: • Will not aerosol when opened • 10, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes • Liquid tight seal prevents sample evaporation. The UniFlex® Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. • Easy identification of samples: Uni-Flex® Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors • The Uni-Flex Safety Cap locks securely onto the outside of the tube lip to prevent evaporation. • Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. • Easy to label: Write directly on the cap with indelible ink • Clear, natural colored caps are tracemetal free (10000 per CS)

Oxford Slim Line Tip, 1-200uL, Natural, CS10000 (10000 per CS)

CODE: 10-B (1000 per PK)

CODE: 1000-B-BL (1000 per PK)

CODE: 2 & 10 uL (10000 per CS)

CODE: 10000-P-B (1000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Engineered for unparalleled durability, BioFlex® PermaFrame TM PCR Plates are designed to accommodate all laboratory workflows and are ideal for use on automated liquid handling platforms. (10 per PK)

0.2 mL Universal PCR Plate, Non-Skirted, Standard, Blue, PK10 (10 per PK)

0.2 mL Universal PCR Plate, Non-Skirted, Standard, Red, PK10 (10 per PK)

0.2 mL Universal PCR Plate, Non-Skirted, Standard, Yellow, PK10 (10 per PK)

0.2 mL Universal PCR Plate, Non-Skirted, Standard, White, PK10 (10 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)