Tissue Culture

24 Well Tissue Culture Plate with Lid, 5/Pack, Sterile (100 per CS )

8 Chamber Cell Culture Slide, No Marking Spot, Glass, Sterile, 6/Tray with 2 Trays/Box (12 per CS )

182cm2 Tissue Culture Flask - Vent Cap, Sterile (40 per CS )

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (12 per CS)

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Manufactured from medical grade virgin polystyrene 35, 60, 70 and 100mm dishes available with a gripping feature for improved handling Vented lids contain molded spacers to allow gas exchange, and stacking rings for increased stability (500 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (24 per CS)

96 Well Tissue Culture Plate, Round Bottom with Lid, Individual, Sterile (100 per CS )

656cm2 Tissue Culture Treated Cell Tower, 1 Layer, Vent Cap, Sterile (8 per CS )

1296cm2 Tissue Culture Treated Cell Tower, 2 Layer, Vent Cap, Sterile (4 per CS )

Smaller size wells use less volume, reducing costs Increase the number of drug screening targets within the standard footprint Ideal for automated applications, colorimetric assays, compound storage or small volume applications Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (50 per CS)

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (50 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (24 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (24 per CS)

Stable base enables filling with flask standing upright Convenient zip-closure bag is a practical alternative to folding and taping opened bags Vent caps feature 0.22µm hydrophobic membrane Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers Molded, interlocking T design for improved stacking - included on 75, 182 & 300cm² and 250, 600 & 850mL size flasks only Flask is printed with lot number and expiration date for easy identification and tracking Angled design is easier to access than square or U-shaped flasks (100 per CS)

Mimic a variety of in vivo conditions with 2 membrane materials and 4 porosities Inserts center in wells, which allows pipette access to lower chamber, and prevents wicking between insert and side wall Inserts hang above tissue culture-treated wells, allowing co-culture; grow cells on both the insert membrane and the well bottom 0.1µm and 0.4µm PET inserts feature clear membranes for improved cell viewing PC membrane is best for cell attachment; PET is best for imaging and microscopy 0.1µm and 0.4µm pore sizes are ideal for cell-cell interaction and drug transport studies 3.0µm and 8.0µm pore sizes are ideal for angiogenesis, migration, and chemotaxis experiments (24 per CS )

Replacement caps available for Tissue Culture Flasks (5 per CS)

Stable base enables filling with flask standing upright Convenient zip-closure bag is a practical alternative to folding and taping opened bags Vent caps feature 0.22µm hydrophobic membrane Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers Molded, interlocking T design for improved stacking - included on 75, 182 & 300cm² and 250, 600 & 850mL size flasks only Flask is printed with lot number and expiration date for easy identification and tracking Angled design is easier to access than square or U-shaped flasks (40 per CS)

Designed for mammalian suspension culture applications as well as bacterial & yeast culture PETG available with either vent or solid cap to prevent common mistakes made with combination caps such as sealing the cap completely and preventing gas exchange Polycarbonate available with vent cap only Avoid contamination with single-use, pre-sterilized flasks Lightweight material is easier to handle than glass Flasks include molded graduation lines Individually bagged for easy storage and handling Medical grade virgin PETG reduces gas permeability (12 per CS)

6 Well Tissue Culture Plate with Lid, Individual, Sterile (100 per CS )

Tissue Culture Treated Roller Bottles have uniform hydrophilic surface ideal for consistent cell attachment Vented or non-vented cap for open or closed systems Easy-to-read black printed graduations Large knurled cap for easy grip (12 per CS)

Cell culture treatment process provides consistent and even hydrophilic surface for improved cell attachment Polystyrene is optically clear for easy cell viewing and imaging Each well has a raised rim which nests into the rings on the single direction lid to reduce evaporation and limit the risk of cross contamination Plates are labeled with alpha-numeric markings for easy identification of individual wells Lids have a stacking feature for added stability when handling tall stacks of plates Round bottom option maximizes sample retrieval and allows mixing (PN 229190) Plate is printed with lot number and expiration date for easy identification and tracking Sturdy individual blister pack prevents damage when handling or shipping Bulk packaging option (5/sleeve) increases efficiency for high volume users (PN 229197) (50 per CS)

Stable base enables filling with flask standing upright Convenient zip-closure bag is a practical alternative to folding and taping opened bags Vent caps feature 0.22µm hydrophobic membrane Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers Molded, interlocking T design for improved stacking - included on 75, 182 & 300cm² and 250, 600 & 850mL size flasks only Flask is printed with lot number and expiration date for easy identification and tracking Angled design is easier to access than square or U-shaped flasks (200 per CS)

Inserts are designed to fit in multiple well plates, centered in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal for drug transfer assays, transport studies, migration assays, cell-cell interaction studies, and to mimic in vivo conditions Insert features openings to allow access to lower compartment without removal from plate 24 Well Plates come with 12 inserts to prevent cross-contamination; pass over empty wells instead of in-use inserts PC membrane is best for cell attachment; PET is best for fluorescence imaging and phase contrast microscopy 0.4µm pore size is ideal for co-culture and drug transport studies 0.4µm PET inserts feature clear membranes for improved cell viewing 3.0µm and 8.0µm pore size are ideal for angiogenesis and chemotaxis experiments Carrier plate is Tissue Culture Treated which encourages cell adhesion; Non-Treated Plates sold separately (12 per CS)

150cm2 Tissue Culture Flask - Plug Seal Cap, Sterile (50 per CS )