Life Science

Silicone Sealing Mat, 384-well, Round for PCR, Printed Alpha-numerics; 10 Mats/Bag, 5 Bags/Case CS 50 (50 per CS )

Capper, decapper, and film spreader tool, 1 ea. EA1 (1 per EA )

40ul 384-well PCR 2-notch plt, PP White, 10 plts/ut. 5 uts/cs (500 per CS )

Half-skirt low profile, 96-well 0.1mL PCR plate works equally well for manual or automated protocols. The half skirt plate is a very rigid design, providing convenient barcoding areas and automation compatibility. Ultra-flat surfaces, large sidewall area, and rigidity optimize this plate for consistent automated handling with most robotic systems. Plate is easily oriented with corner notch and molded in alpha-numeric. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and other SBS compliant equipment. Plates are manufactured of low extractable, optically clear, virgin, medical grade polypropylene specifically for the rigorous demands of the research laboratory. Uniformly thin-walls promote rapid even thermal transfer for consistent amplification and increased recovery rate. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Corner Notch: H1 Surface Treatment: None Matching silicone cap mats: PCMATR-9-PRT Compatible with all standard 0.1 ml block thermal cyclers Maximum Volume: 200ul Working Volume: 100ul Volume with Mat: n/a Plates are packaged and sold 50 per case (5 bags of 10 plates each) Case dimensions (LxWxH): 10.5 x 8.75 x 4.5 (in) Case weight (lbs.): 3.3 Made from ultra-clear research grade silicone; no mold release agents RNase, DNase, DNA, PCR inhibitor free, and Pyrogen Free Certification (500 per CS )

200ul 96-well PCR Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

200ul 96-well PCR Half Skirt, Elevated Wall (ABI style) Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

100ul 96-well PCR Full Skirt Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

Individual tubes with attached flat caps achieve even and precise thermal transfer to maximize your yield. Our standard profile, 0.2mL tubes with attached flat caps are precision molded for clarity and sample visualization. Flat caps are frosted for writing or labeling. Molded as a single part ensures a uniform fit for precise thermal transfer with minimal evaporation. Individual tubes with attached flat caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNase, DNA, and pyrogen contamination (10000 per CS )

Tube strips with attached flat caps make cross contamination and missing caps a thing of the past. Achieve even and precise thermal transfer to maximize your yield with our standard profile, 0.2ml well volume, 8-PCR tube with attached flat cap strips. Precision molded using only ultra-clear, virgin, medical grade polypropylene for clarity and sample visualization. These ILP attached tube and cap for PCR offer the same labeling surface. Molding as a single part ensures a uniform fit for precise thermal transfer with minimal evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Each tube is joined to a cap making cross contamination with the wrong cap impossible. Their thin and consistent wall thickness optimizes heat transfer to maximize yield. Recommended for low to medium throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Caps are angularly attached to allow full loading of standard thermal blocks and racks. Durable bands between the wells keep these strips ridged, easy to handle, and durable. Sections of tubes will not inadvertently break apart but are easily cut with scissors into smaller sections or individual tubes. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination (600 per CS )

200ul 96-well PCR No Skirt plt, PP white, 10 plts/ut. 5 uts/cs (500 per CS )

Molded as a single part, our individual 0.2mL tube with attached optically clear flat cap achieve even and precise thermal transfer while minimizing evaporation in your qPCR. Precision molded using only ultra-clear, virgin, medical grade polypropylene for clarity and sample visualization. Optically clear flat caps are ideal for fluorescence detection, luminescence, and imaging techniques including qPCR. The upper surfaces are extremely clear and offer greatly improved light transmittance over standard flat caps. Light signals pass through uninhibited for consistent and reliable qPCR performance. Caps have longer cap flanges that produce a tight fit and reduce sample evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNase, DNA, and pyrogen contamination. (10000 per CS )

40ul 384-well PCR 2-notch plt, PP Nat, 10 plts/ut. 5 uts/cs (500 per CS )

Individual tubes with attached domed caps minimize evaporation especially when used with small sample volumes, in thermal cyclers with heated lids, or older units. Achieve even and precise thermal transfer while minimizing evaporation with our 0.2ml, attached dome cap tubes. The domed cap design is to assist condensate to re-enter the reaction mixture and gain contact with heated lids for improved heat transfer. Precision molded as a single part creates parts with uniform fit and reduce sample evaporation. Tubes with attached caps are regularly quality tested for evaporation rates and must exhibit less than 3% sample loss. Individual tube volumes Overall Volume: 300 µl Working Volume: <200 µl Recommended for low throughput applications, these tubes are designed to fit all standard 0.2mL block thermal cyclers. Each tube is joined to a cap, their thin and consistent wall thickness optimizes heat transfer to maximize yield. Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination. (1000 per CS )

100ul 96-well PCR Half Skirt, Elevated Wall (ABI style) Amplification Plate, PP Clear; 10 Plates Per Unit. 5 Units Per Case CS 50 (500 per CS)

Full-skirt low profile, 96-well 0.1mL PCR plate works equally well for manual or automated protocols. The full skirt plate is a very rigid design, providing convenient barcoding areas and automation compatibility. Ultra-flat surfaces, large sidewall area, and rigidity optimize this plate for consistent automated handling with most robotic systems. Plate is easily oriented with corner notch and molded in alpha-numeric. Its ANSI/SLAS 1-2004 compliant footprint ensures that it will fit all standard fixtures, stackers, and other SBS compliant equipment. Plates are manufactured of low extractable, optically clear, virgin, medical grade polypropylene specifically for the rigorous demands of the research laboratory. Uniformly thin-walls promote rapid even thermal transfer for consistent amplification and increased recovery rate. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Corner Notch: H1 Surface Treatment: None Matching silicone cap mats: PCMATR-9-PRT Compatible with all standard 0.1 ml block thermal cyclers Maximum Volume: 200ul Working Volume: 100ul Volume with Mat: n/a Plates are packaged and sold 50 per case (5 bags of 10 plates each) Case dimensions (LxWxH): 10.5 x 8.75 x 4.5 (in) Case weight (lbs.): 3.3 Made from ultra-clear research grade silicone; no mold release agents RNase, DNase, DNA, PCR inhibitor free, and Pyrogen Free Certification (500 per CS )

Polypropylene Sealing Film with encapsulated silicone adhesive, 2.8mil, clear for Real Time PCR (qPCR); 100/pk, 5pk/cs CS 500 (50 per CS )