Test Tube Racks

EISCO TEST Tube STAND 6 holes of 15 dia (1 per EA )

Six 25mm holes, six drying pins, with a 1/2" thick base. Solid hardwood construction. Polished to minimize damage from spills. (1 per EA)

Fiberglass reinforced polypropylene racks are ideal for bench work or tube storage. Made from polypropylene Spacious peg design allows easy viewing of tube contents Use as a drying rack for glass plates or upside-down tubes Pegs remain straight even after repeated autoclaving Embossed indexing, ribbed grips, and drainage holes Autoclavable (2 per PK )

Get organized with this fun, interlocked rack. Rotate each of the four modules independently to configure for the tubes that you want to use. Made from polypropylene Suitable for a massive variety of culture, centrifuge, micro centrifuge, round, flat or conical bottomed tubes Polypropylene rack maintains its orientation until you twist it again. Two versions to cover smaller and larger tube requirements Tubes: 50 mL Wells:2 Well Dia: 29 mm Tubes: 10-15 mL Wells: 8 Well Dia: 20 mm Tubes: 15-20 mL Wells: 6 Well Dia: 16 mm Tubes: 10-13 mL Wells: 10 Well Dia: 13.5 mm Dimensions: 8.81 x 4.33 x 4.33 in (22.4 x 11 x 11 cm) 1/pk Color: purple, blue, green, yellow Autoclavable (1 per EA )

Adapt-A-Rack® Adaptable Multi-Tube Rack, Combo Blue/Green (2 per PK )

Test Tube Peg Rack, 50 places for 16mm tubes (1 per EA )

Coated Wire Bottle Rack 30-33 mm 2 x 6 Format, Blue (1 per EA )

Test Tube Stand of 12 holes, Wooden (1 per EA )

Coated Wire Tube Rack 16-20mm 8x10 Format, Blue (1 per EA )

Test Tube Stand of 6 holes, Wooden (1 per EA )

Foam Test Tube Racks for 10x75mm, 12x75mm & 13x100mm Tubes, Charcoal, PK6 (4 per PK)

Interlocking multi-tube racks Our user friendly cube rack allows you to work with different sized tubes all in the same plane. Heavy duty polypropylene rack. Autoclavable Pack of 5 Each module measures 4.25 x 4.45 x 4.45 in (10.8 x 11.3 x 11.3 cm) Each module will take 4 x 50 mL, 10 x 15 mL, 12 x 12 mm and 16 x 1.5/2.0 mL tubes (5 per PK )

Tube Rack, fraction collector type, 80 x 1.5mL/2mL, assorted colors (B, G, R, Y, O), pack of 5 (5 per PK )

Snap-N-Rack Tube Rack for 16mm and 17mm Tubes, 60-Place, PP, White, EA1 (1 per EA)

Test Tube Stand, Polypropylene, 25mm x 36 Tubes (1 per EA )

Test Tube Stand, Polypropylene, 25mm dia. holes for 6 tubes (1 per EA )

Test tube rack, blue, 55 tubes to dia.18mm, 5x11, pack of 5 (5 per PK)

Wireless Tube Rack, 13mm, Full Size: 72-Place, Nylon, Red (8 per CS)

Coated Wire Tube Rack 10-13mm 9x12 Format, Blue (1 per EA )

Coated Wire Test Tube Rack, 40 Holes, Outer Diameter permitted of tubes 20-22mm, 4 X 10 Format (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 19/32" (15mm) Tube size: 13mm Spacing: 6x12 holds 72 tubes Dimensions: 8 1/6" x 4 1/8" x 2" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 11/16" (17.5mm) Tube size: 16mm Spacing: 6x12 holds 72 tubes Dimensions: 9 1/4" x 4 3/4" x 2 15/16" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.062" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

Test Tube Stand, Polypropylene, 16mm & 25mm dia. holes for 6 tubes (1 per EA )

Heavy wire test tube rack with durable epoxy coating. Features 20 places to hold tubes from 16–20mm in diameter. Autoclavable. (1 per EA )