General

Snap-N-Rack Tube Rack for 12mm and 13mm Tubes, 90-Place, PP, Blue, EA1 (1 per EA)

LabJaws offers the largest selection of Lab-Frame Kits, Lab-Lifts, Rods, Support Stands & Connectors in the industry to safely hold labware. Whether you need a standard lab-frame or need to create a unique set-up, we have options to fit any space or application. Dependable connectors, secure rods, and clamps to meet your requirements. Five unique holders available in a variety of sizes and materials to accommodate different rods up to 24 mm in dia. (1 per EA)

Wireless Tube Rack with RFID for CapTrack CT1 and CT2 models - Half size, 13mm, 36 place, White (1 per EA)

Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8". (1 per EA)

This 7.5 meter (25 foot) metal blade tape measure is 1" wide and is scaled in 1/16" increments on one side and 1mm increments on the other side. Features an easy to read lockable, retractable yellow blade and high-impact ABS case. (1 per EA)

Manufactured with high-quality 304 Stainless Steel, United Scientific REUZ™ (“re-use”) Offset Spoon Spatulas include an offset spoon on one side and a spatula on the other side. Useful in laboratory settings where easily sterilized stainless steel is desired. Constructed of a single piece of stainless steel with a polished surface to resist contamination. Intended for use with most powders, granules, pastes and liquids. Available in sizes from 155 mm to 395 mm. Sold individually. REUZ™ products from United Scientific promote sustainability in all laboratory environments. REUZ™ products from United Scientific promote sustainability in all laboratory environments. (1 per EA )

96 Well Microcentrifuge Tube Rack, Orange, PK5 (5 per PK)

Easily retrieve individual well samples without removing or puncturing sealing film Pre-cut flaps over each well allow easy manual or robotic pipette tip entry without the risk of adhesive residue contamination Flaps self-seal after pipette tip is removed, ideal for short-term storage of precious samples Boldly printed alignment circles ensure accurate film placement on standard 96 well plates Each well is individually alphanumerically labeled (50 per CS )

The Spiralus zone sampler enables zone-precise sampling of coarse-grained bulk materials. The spiral-shaped opening of the slots enables precise sampling layer by layer. Ideal for grain and pellets. (1 per EA )

Solvent pump hand operated, 60 cm, G 2" (1 per EA )

Solid blue neoprene stoppers: Bottom 18mm Top 21mm Length 26mm Made from long lasting neoprene rubber, oil resistant, Use up to temps of 250°F / 120°C Pack of 10 (10 per PK )

Blue neoprene stoppers with 1 hole (5 mm dia): Bottom 38mm Top 42mm Length 40mm Made from long lasting neoprene rubber, oil resistant, Use up to temps of 250°F / 120°C Pack of 10 (10 per PK )

Labeling Tape, 1/2" x 500" per Roll, 6 Rolls/Box, Orange (6 per PK)

Label/Dot Combo Roll, Cryo, Direct Thermal, 38x13mm & 9.5mm, Dot for 2.0mL Tubes, Orange (500 per PK)

DuraPorter® XL Tube Rack, 10-13mm tubes (3 per PK )

Drying Rack Replacement Basket, Clear (2 per PK )

Magnetic stir bar is made from ALNICO, one of the strongest permanent magnets available The sintered manufacturing process reduces the chance of decoupling (spin outs), which weaker stir bars often suffer from Encapsulation in PTFE protects both magnet and what it is stirring. Chemically inert and easy to clean Can withstand temperatures up to 250°C, making them suitable for use with both unheated and heated stirrers Low friction octagon shape with a center pivot ring helps create a strong mixing vortex, even with more viscous solutions The stir bar retriever can recover stir bars even in hot solutions when stirring and mixing is no longer required (10 per PK )

Mini Cooler, 0 deg.C, 12-Place, 3x4 for 1.5mL Tubes, Red Coa or COC Avail upon Request EA1 (1 per EA)

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

Silicone stoppers are particularly useful due to their inert and nonreactive nature. It will not impair the growth of tissue cultures and resistant to most chemical acids and solvents. (12 per PK )

Our Magnetic Stir Bars are constructed of high quality magnets coated with PTFE. Along with individual sizes of polygon, octagon, and egg-shaped, two convenient assortments are available. Stir Bar retrievers also available. (1 per EA)

Cast iron, zinc-plated support ring with boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)

96 Well Microcentrifuge Tube Rack, Natural, PK5, CS20 (20 per CS)

Heavy stamped steel bases with black enamel finish feature an added steel plate on the back, which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base. Includes a re (1 per EA)