General

Hand Hold Totes are 4" high and are designed to store, transport and organize chemicals on countertops, shelves and cabinets with minimal space. Featuring a 1" x 4" hand hold cut into each side, Hand Hold Totes are seamless, rotationally molded polyethylene and feature inside coved corners for easy clean-up. (1 per EA )

Polyethylene Barbed Union Tube Fittings, Reducing Connector, 3/4 Inch x 1/2 Inch, 100/PK (100 per PK )

Non-sterile refill roll. Ideal for use under the hood; the SealMate dispenser minimizes film contamination. Each sheet is separated by an adhesive-free, perforated, color-coded red band. Designed to facilitate air and CO2 exchange. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. (2 per RL)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (100 per PK)

Lab Jack, Heavy Duty, Metal, Large, Yellow, Base: 5.9" x 4.75" (150 x 121mm), Minimum Height: 3.1" (78mm), Maximum Height: 10.9" (278mm), Load Capacity: 175 lbs. (80 kgs) (1 per EA)

AlumaSeal II is a soft non-permeable aluminum foil with a strong, medical-grade acrylic adhesive. Easy-to-pierce for direct sample recovery. Has less tendency to roll back on itself when removing the backing paper. Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). Easily pierceable with single or multichannel pipettors and robotic probes. 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well. (50 per PK)

General purpose 25ml plastic vial containers with push-in friction fit hinged lids. Plastic vials withstand temperatures up to 80°C. Dimensions: 55mm H x 30mm Ø. (1000 per CS)

Sanoprene Orange/Orange 12/PK (12 per PK)

MCT Twin Rack for 0.5ml & 1.5ml. (1 per EA )

Tray, HDPE 27 3/4 x 23 1/2 x 3 1/4" (1 per EA)

Tubing ICP Red/Red/Red 1.14x.85 12pk (12 per PK )

Biologix 2 inch 100 well polycarbonate freezer box (dimensions: 132x132x53mm) with removable lid. boxes/lids have numeric grid for identification purposes. boxes come in assorted colors (red, yellow, green, blue and white). 20/case (20 per CS )

These hinged lid containers are ideal for use just about anywhere. They feature a secure snap closure with hinged lid that eliminates lost caps. Containers offer air and moisture resistance to contents. Manufactured from flexible FDA approvable polyethylene resin. All hinged lid containers are supplied in a case 100. (100 per CS)

Polypropylene Y-Type Barbed Tubing Connectors (Wye-Shaped), Three 3/8 Inch Barbs, Autoclavable, 100/PK (100 per PK )

These strongly readjusting Azlon tweezers are available with sharp or rounded ends with fine tooth grips. Plastic forcep tweezers are supplied in packages of six. (6 per CS)

Spatula Stainless steel 20cm., Double ended, flat blades (1 per EA )

Cryo-Tags for Laser Printers, White, 3 x 2 in. (76 x 51 mm), 12 labels/sheet, for racks and boxes (240 per PK )

Durable laboratory trays with rounded rim, shatterproof and flex-resistant. Nestable design saves space. Suitable as spill trays, experiment trays, instrument holders and food presentation trays. Set includes 1L, 3L, 5L and 15L sizes. (1 per EA )

Deflagrating Spoon and Cap (1 per EA )

Heavy plastic spill containment trays are fabricated with 3/16” thick polypropylene or 1/4”high density polyethylene and feature an all welded construction. Dimensions listed are inner (I.D.). (1 per EA)

Test Tube Stand Wire Pattern, Polypropylene, 13mm x 90 Tubes (1 per EA )

Foam Test Tube Racks for 15x85mm, 16x100mm, 16x125mm & 16x150mm tubes, Charcoal, CS18 (18 per CS)

Manufactured from type 1 class a Borosilicate glass. Non-corrosive Borosilicate glass to prevent etching. Accepts bellco stainless steel closures and kaput closures. Round bottom Sizes: 25x150mm Volume: 55.6ml Closure: 25mm (72 per CS )

Clay Pipe Triangle 5cm. (1 per EA )