General

Constructed from painted aluminum and stainless steel, this sturdy support jack is designed with a scissor lift to enable quick height adjustment at the turn of a knob. The 6-inch x 6-inch platform can be vertically adjusted from a closed position of 3 inches to a maximum of 10.5 inches. Maximum load capacity is 20kg. (1 per EA)

AeraSeal features a hydrophobic, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers. Pore size from 10µm to 50µm. Moisture vapor transmission rate = 4,200g/m²/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery. Available in roll format for automation: AeraSeal Roll-Seal. (100 per PK)

Draining Rack - Plastic (1 per EA )

Floating Test Tube Racks, Octagon, fits PCR, .25 and .5ml microtubes, 10/pack (10 per PK )

Prem Clamp Long 3 Finger Vinyl Ct W Bh (1 per EA )

ThermalSeal RT2 sealing films combine an optically transparent polyester sealing film with a very strong, ultra-smooth, and highly conformable adhesive. Designed for use with standard 96-well plates where rows must be selectively protected or accessed. Certified DNase- & RNase- free. Ultra-high optical clarity. Features a soft conformable adhesive which forms a very strong seal around raised wells to minimize evaporation and cross-contamination. Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates. Not recommended for removal after thermal cycling. Non-Sterile. (100 per PK)

Label Dispenser, Multi-Roll (1 per EA)

PVC Tubing 0.95mm 12/pk (12 per PK )

Table Clamp (1 per EA )

26' Cassette of 12mm lab tape, red w/ white print (1 per EA)

Retort Ring Closed, ID of ring 5cm, length of stem 14cm. (1 per EA )

LevGo® smartSlicer® Razor Blades Disposable, 0.27mm Small (100 per PK )

Slanted blue pegboard or slatwall display basket for your parts. Blue powder coat helps improve visibility of basket and items inside. Label card slot allows you to attach part descriptions, prices, serial numbers, etc. 100% USA Made. Marlin Steel 00-920-07 GTIN: 692502000291 Material: Plain Steel Finish: Blue Powder Coated Nestable: No Stackable:No 8in L x 4.88in W x 3.375in H • 0.79lbs 203.2mm L x 124mm W x 85.7mm H • 0.36kg (1 per EA )

Our deluxe line of 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Clamps open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Extens (1 per EA)

Handy for storage and sterilization of instruments, these durable polypropylene trays include covers that fit snugly into grooves molded into the trays. Available in two sizes: the smaller size can be used to sterilize small instruments, and the large size allows pipettes to be fully immersed in disinfectant before sterilization. Autoclavable. (2 per PK )

X-Pierce film is designed for short-term processing and storage of samples that require multiple access to wells by pipet tips or robotic probes. Provides easy access without pipet tip coring or adhesive fouling. A pre-cut “X” over each well creates bendable flaps that provide sample access without coring or adhesive fouling of tips or probes. Ideal for COVID-19 sample collection in deep-well plates using swabs. Printed circles aid in the alignment of the film to the plate. Printed alphanumerics identify each well of a 96-well plate. Non-Sterile. (100 per PK)

Features a 3-prong die-cast clamp attached to a chrome-plated steel rod. Prongs are covered with rubber tubing. Overall length is 10". (1 per EA)

For sample identification and plate labeling. Each end-tab features a colored dot and white wring area. An inscribed color-coded end-tab can be removed and pasted into a laboratory notebook while the other remains on the plate for identification. The film sheet can be removed from the plate without disturbing the identification label due to the finely perforated end-tabs. Provides a secure seal and is easy to remove. Rigid polyester film features good clarity and easy handling. Features two end-tabs with perforations. Non-sterile. (50 per PK)

Cast iron, zinc-plated support ring with boss-head clamp and thumbscrew. Distance from support to center of ring is 4-1/2" for all sizes. (1 per EA)

An economical, efficient way to rapidly seal microplates; faster than applying single sheeted foils. Self-standing, non-slip supports hold pre-scored foil roll securely in place for quick and easy dispensing. Removal from a continuous backing liner minimizes curl making FoilSeal easier to handle and apply. Liner can be torn off or fed directly into a waste basket for disposal. Roll tension can be easily adjusted to user preference (e.g. loose, tight). Certified DNase- & RNase- free. Excellent chemical resistance (e.g. DMSO). 2.0mil aluminum foil minimizes shredding during removal; ideal for cold storage. Conformable foil allows visual verification of seal security around each well. Pierceable with a pipet tip or robotic probe for direct sample recovery. Specially formulated adhesive provides an excellent seal to minimize evaporation, reduce cross-contamination and prevent spillage. Removes easily and cleanly from plate surface. High integrity packaging prevents damage during transit; poly bag eliminates dust and particulate contamination (500 per RL)

Wireless Tube Rack, 13mm, Half Size: 36-Place, Nylon, Yellow, EA1 (1 per EA)

LabJaws Clamps are designed to securely grip and position laboratory apparatus. Extension arm clamps with 360° rotation allow placement of apparatus at various distances from lab-frames and are easily secured with optional holders. Swivel, fixed position, and thermometer clamps easily hold apparatus near the lab-frame or stand, and have a built-in holder for simple attachment to lab-frames or apparatus. Flow control clamps available in 7 styles. (1 per EA)

Our deluxe line of 3-prong extension clamps are constructed of pressure die-cast zinc alloy and are chrome-plated. Clamps open to about 3", have a recommended maximum grip size of about 2.25", and feature double keyed spring-type adjustment screws. Boss h (1 per EA)

Round material handling basket with handles and mesh that is four openings per linear inch. Robust USA Made Quality. Ideal for washing parts, cleaning basket, degreasing basket, ultrasonic cleaning, curing, material handling in a variety of applications such as parts cleaning, chemical bath, heat treating & cryogenics. The baskets have handles for easy gripping. Each basket stacks so parts do not get crushed that are inside the basket.100% USA Made. Marlin Steel 00-100-31 GTIN: 692502001601 Material: 304 Stainless Steel Finish: Electropolished Nestable: No Stackable:Yes Handle Height: 11.75" Mesh Dimensions (Inches): 4 Openings Per Linear Inch Mesh Openings 10in D x 8in H 254mm D x 203.2mm H (1 per EA )