General

An unbreakable Polypropylene Drum Thief makes sampling large numbers of unmarked drums quick and easy. Samples are easily retrieved by just placing your thumb over the top end of the tube. Polypropylene won't break like glass and is chemical-resistant. (1 per EA)

Round material handling basket with handles and wire mesh that has four openings per linear inch. This round basket design can accommodate many types of parts. Ideal for parts washing, cleaning, degreasing, ultrasonic cleaning, curing, and materials handling applications. The basket has handles for ease of manual handling. Each basket is designed to stack so parts do not get crushed. 100% USA Made. Marlin Steel 00-102-31 GTIN: 692502001625 Material: 304 Stainless Steel Finish: Electropolished Nestable: No Stackable:Yes Handle Height: 12" Mesh Dimensions (Inches): 4 Openings Per Linear Inch Mesh Openings 14in D x 10in H 355.6mm D x 254mm H (1 per EA )

Look for the V at the neck.™ smartSpatulas offer an economical, disposable tool for transferring, collecting, and handling chemical and biological materials Economical, Polypropylene, Single-Use Laboratory Spatulas Ideal for Transferring, Manipulating, and Mixing Materials Versatile Double-Ended Design Help Minimize Cross Contamination Resistant to acids and bases Autoclavable The V design at the neck of the disposable lab spatula is a trademark of LevGo, Inc (7500 per CS)

Neoprene stoppers can be used in areas where rubber would be attacked by reagents or solvents. Synthetic green neoprene stoppers have good resiliency and shelf-life. They withstand petroleum products and oils as well as most inorganic acids and bases. Sold as one-pound bags (1 per EA)

An unbreakable Polypropylene Drum Thief makes sampling large numbers of unmarked drums quick and easy. Samples are easily retrieved by just placing your thumb over the top end of the tube. Polypropylene won't break like glass and is chemical-resistant. (1 per EA)

Pvc Tubing Yellow/Blue 12/Pk (12 per PK)

Pvc Tubing Green/Green 12/Pk (12 per PK)

SCILOGEX Magnetic Stirring Bar PTFE coated, round with pivot ring 38 x 9.5mm (1 per EA)

An unbreakable Polypropylene Drum Thief makes sampling large numbers of unmarked drums quick and easy. Samples are easily retrieved by just placing your thumb over the top end of the tube. Polypropylene won't break like glass and is chemical-resistant. (1 per EA)

Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place self-standing rack on a table or near a sink, or use hooks to hang rack on the wall. Holds up to 90 pieces of labware on 18 x 127 mm pins and 72 x 76 mm pins Constructed of spot-welded, vinyl-coated steel wire for durability Easily accessible and removable bottom drainage pan Overall dimensions 462 x 182 x 525 mm (1 per EA )

Labeling Tape, 1" x 500" per Roll, 3 Rolls/Box, White (12 per CS)

Vinyl laboratory tubing conforms to critical industry standards, having been approved by FDA, USDA, USP Class VI, NSF, and UL. Vinyl laboratory tubing's purity, performance and reliability make it the material of choice when handling liquids, gases and semi-liquids. (50 per CS)

eXTReme Seal Kit includes dispenser plus 2 rolls of film that features an extra-strong thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate. Environmentally friendly; no paper liner to remove and discard. Each sheet is separated by an adhesive-free, perforated, color-coded blue band. The smooth lower surface of the dispenser can be used to seal the film to the plate. Replacement rolls can be easily installed by releasing the locking clasps on the dispenser Certified DNase- & RNase- free. Non-Sterile (1 per EA)

Lattice Clamp (pack-12) (12 per PK )

Ring Support Plate, Steel, 10cm dia (1 per EA )

Ensures water is sampled at the optimum depth. Supplied with 500ml sample bottle. (1 per EA)

Easy-to-grasp tabs for sample handling and storage 96 wells for 0.5 mL tubes on one side and 96 wells for 1.5/2.0 mL tubes on the reverse side Made of polypropylene Wells are arranged in standard 8 x 12 array Tabs on each end of rack snap lid into place 0.5 mL wells separated by molded-in grid lines, making them easier to see Raised rings around the 1.5 to 2.0 mL wells make tubes easier to remove Autoclavable (5 per PK )

Sample Tube, Graduated, 50 mL (1 per EA)

Wireless Tube Rack, 20mm, Half Size: 20-Place, Nylon, Blue (8 per CS)

Wireless Tube Rack, 20mm, Half Size: 20-Place, Nylon, Red (8 per CS)

BetterBox™ Storage Box with hinged lid, 81 x 1.5mL to 2.0mL Microtubes pack of 5, assorted colors (5 per PK )

Magnetic stir bar is made from ALNICO, one of the strongest permanent magnets available The sintered manufacturing process reduces the chance of decoupling (spin outs), which weaker stir bars often suffer from Encapsulation in PTFE protects both magnet and what it is stirring. Chemically inert and easy to clean Can withstand temperatures up to 250°C, making them suitable for use with both unheated and heated stirrers Low friction octagon shape with a center pivot ring helps create a strong mixing vortex, even with more viscous solutions The stir bar retriever can recover stir bars even in hot solutions when stirring and mixing is no longer required (10 per PK )

Cool Container 4L Ice Pan, Blue (1 per EA )

Tubing White/White 1.33mm Viton, 50FT (1 per EA)