General

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

These black stoppers are made of solid natural rubber that stays pliable over a long period of time. Ideal for use with non-aggressive or concentrated solutions. Low sulfur content. Withstand temperatures from –25 to 70°C (–13 to 158°F). Available in solid, one-hole, and two-hole versions. Each stopper has its size marked in raised figures. All stoppers are 25 mm tall. Sold as one-pound bags. (10 per PK )

Silicone stoppers are particularly useful due to their inert and nonreactive nature. It will not impair the growth of tissue cultures and resistant to most chemical acids and solvents. (12 per PK )

Silicone stoppers are particularly useful due to their inert and nonreactive nature. It will not impair the growth of tissue cultures and resistant to most chemical acids and solvents. (12 per PK )

STAINLESS STEEL SPATULA, 5" (12.5 CM), BOTH ENDS FLAT (10 per PK )

Soft, silicone grip provides improved comfort and handling. Blade is constructed of stainless steel with a flexible, rounded end. Handle is manufactured of polypropylene and layered with a silicone grip. Handle dimensions are 4-1/8”L x 1”W x 1/2”H. Latex-free. Autoclavable. (1 per EA )

Our Magnetic Stir Bars are constructed of high quality magnets coated with PTFE. Along with individual sizes of polygon, octagon, and egg-shaped, two convenient assortments are available. Stir Bar retrievers also available. (1 per EA)

Our Magnetic Stir Bars are constructed of high quality magnets coated with PTFE. Along with individual sizes of polygon, octagon, and egg-shaped, two convenient assortments are available. Stir Bar retrievers also available. (1 per EA)

These polypropylene burette clamps are completely corrosion-proof. The spring-loaded jack in the middle provides a vice-like grip on the burette and prevents it from slipping. Two tapered wedges are included to ensure firm grip on 1/2" or 3/8" diameter rods. (12 per PK )

These polypropylene burette clamps are completely corrosion-proof. The spring-loaded jack in the middle provides a vice-like grip on the burette and prevents it from slipping. Two tapered wedges are included to ensure firm grip on 1/2" or 3/8" diameter rods. (6 per PK )

Burkle LiquiDispo for low-viscosity liquids up to approximately 10,000 mPa·s. (21mm diameter) (20 per PK)

Will not rust or deteriorate in water baths or co2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Each opening rack 11/16" (17.5mm) Tube size: 16mm Spacing: 6x15 holds 90 tubes Dimensions: 11 1/2" x 4 3/4" x 2 15/16" WIRE SPECIFICATIONS: SIDE & UPRIGHTS: .135"OD WIRE, CROSS WIRE: 0.063" OD WIRE, BTTM MESH: 1/4" Minimum order requirement: 5 each (1 per EA )

96 Well Microcentrifuge Tube Rack, Black, PK5, CS20 (20 per CS)

Transparent Pierceable Film for Abi 3730, EA1 (1 per EA)

Polypropylene racks with a 3-tier design provide a clear view of the tube contents and convenient insertion and removal of tubes. (2 per PK )

Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes. (4 per PK )

Polypropylene rack is designed to hold six Nessler cylinders. Flat lower deck is white to provide a reflective surface. Chemical and corrosion resistant rack can be autoclaved at 121°C (250°F). (1 per EA)

Cast iron base with gray enamel finish. Base measures 5" x 8" x 3mm thick. A welded plate on the mounting hole gives the support rod 10mm of screw support, which is three times thicker than traditional stands. Includes a removable, zinc-plated steel support rod, measuring 20" long and 3/8" in diameter. An 80mm torque rod helps secure the support rod to the base plate. (1 per EA )

Polypropylene racks with a 3-tier design provide a clear view of the tube contents and convenient insertion and removal of tubes. (2 per PK )

Polypropylene racks with a 3-tier design provide a clear view of the tube contents and convenient insertion and removal of tubes. (4 per PK )

Polypropylene racks with a 3-tier design provide a clear view of the tube contents and convenient insertion and removal of tubes. (2 per PK )