Syringe Filters

Cytiva/Whatman Equivalent: 6874-2502 Environmental Express (CP) Equivalent: SF120T (100 per PK )

Syringe Filter, PVDF Hydrophilic Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (50 per PK)

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

Cytiva/Whatman Equivalent: 6825-1307 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

EZFlow® Non-Sterile Hydrophilic PTFE Syringe Filters, 0.22um Pore Size Membrane for Prefiltration and Sample Prep, 13mm, 100/PK (100 per PK )

Syringe Filter, Nylon Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (50 per PK)

Syringe Filter, Nylon Membrane, 0.45μm Porosity, 30mm Diameter, PP Housing, Non-sterile, Bulk Packed (100 per PK)

Biologix sterile syringe filter, membrane: ca,pore size: 0.22µm,diameter:30mm. female luer lock + male luer slip. 100 pcs/pack, 4 packs/case (400 per CS )

EZFlow® Non-Sterile Glass Fiber (GF) Syringe Filters, 0.45um Pore Size Membrane for Prefiltration and Sample Prep, 25mm, 100/PK (100 per PK )

Cytiva/Whatman Equivalent: 6900-2504 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )

For sample volumes of 2mL to 100mL Retention volume <115µL Maximum operating temperature: 100C autoclave at 125C for 15 min. Maximum operating pressure approximately 100 psi (50 per CS )

EZlabpure™ Polyethersulfone (PES) Syringe Filters, 0.22 µm Sterilizing Membrane, 25 mm,Sterile,100/PK (100 per PK )

EZFlow® Non-Sterile Hydrophilic PTFE Syringe Filters, 0.45um Pore Size Membrane for Prefiltration and Sample Prep, 13mm, 100/PK (100 per PK )

EZFlow® Non-Sterile High Particulate Syringe Filter, 0.22µm Hydrophilic PVDF w/ Glass Fiber Prefilter, 25mm, 100/PK (100 per PK )

Syringe Filter, CA Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped (50 per PK)

Syringe Filter, CA Membrane, 0.22μm Porosity, 13mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

EZFlow® Non-Sterile Polyethersulfone (PES) Syringe Filters, 0.45um Pore Size Membrane for Prefiltration and Sample Prep, 25mm, 100/PK (100 per PK )

Cytiva/Whatman Equivalent: 6825-2517 (100 per PK )

Syringe Filter, MCE Membrane, 0.22μm Porosity, 30mm Diameter, PP Housing, STERILE, Individually Wrapped (1000 per CS)

Individually packed, sterile, in peel-to-open paper/plastic blister packs Also available bulk packed, non-sterile, in PVDF, PES, PTFE and Nylon membranes Color coded syringe filters are printed with membrane material and pore size opposite the luer-lock Female luer-lock inlet and male luer slip outlet 0.22µm CA Syringe Filter with integrated GF prefilter (PN 229769) is ideal for one-step filtration of viscous solutions and particulate removal Filters are molded into the polypropylene housings, providing a reliable seal without the use of adhesives (30 per CS)

Cytiva/Whatman Equivalent: 6895-2504 (100 per PK )

HydroBlokr™ functions via use of proprietarily designed, multi-layered series of membranes placed within an ultrasonically welded device which creates a check-valve effect when wet. The functional membrane within the series immediately reacts in presence of aqueous solution by stopping and blocking further passage1 . The materials create a highly retentive pore structure which helps protect the user environment2 . The extraordinarily high flow rates compared to other simple hydrophobic barrier filters creates a high-flow, less restrictive path for vacuum and positive pressure to pass. Unlike simple hydrophobic barrier filters, once HydroBlokr™ is wetted it halts operation and locks out further usage until replaced. No further aspiration is possible, thus helping to protect your sample3 and making it plainly obvious the filter has become wet and replacement is necessary. (100 per PK )