Glass Fiber Filters

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents, MFS/Advantec Equivalent: GC-50 110MM (100 per PK )

Cytiva/Whatman Equivalent: 1821-025 Pall Equivalent: 66198 Millipore Equivalent: APFB 025 00 Ahlstrom Equivalent: 1210-0250 MFS/Advantec Equivalent: GB14025MM Sartorius: FT-3-1102-025 (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 37MM (100 per PK )

Cytiva/Whatman Equivalent: 1827-125 Ahlstrom Equivalent: 1690-1250 MFS/Advantec Equivalent: GC50125MM Sartorius: FT-3-01147-125 (100 per PK )

EZFlow® Glass Fiber Membrane Filters, 1.0um, 90mm Diameter Disc Prefilters, 100PK (100 per PK )

This new grade has a particle retention of 0.5µm. It has >20x loading capacity of an equivalent porosity MCE, CN, ePTFE or PVDF membrane and >15x the flow rate. Back pressure is nearly non-existent in comparison to surface membranes. Chemically inert, pure binderless borosilicate glass with no sizing additives or other surfactants. Low background noise in LC/GC/MS and very low extractables in presence of aggressive solvents. MFS/Advantec Equivalent: GC-50 35MM (100 per PK )

Ahlstrom Equivalent: 1610-0700 MFS/Advantec Equivalent: GC5070MM (100 per PK )

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK )

Cytiva/Whatman Equivalent: 1827-150 Ahlstrom Equivalent: 1690-1500 MFS/Advantec Equivalent: GC50150MM Sartorius: FT-3-01147-150 (100 per PK )

Cytiva/Whatman Equivalent: 1851-865 Pall Equivalent: 7204 (100 per PK )

Ahlstrom Equivalent: 1510-1500 MFS/Advantec Equivalent: GF75150MM Sartorius: FT-3-1105-150 Environmental Express (CP) Equivalent: FG75150MM (100 per PK )

Cytiva/Whatman Equivalent: 1810-150 Ahlstrom Equivalent: 0250-1500 Environmental Express (CP) Equivalent: FG77150MM (50 per PK )

LabExact Moisture Analysis Binderless Glass Microfiber Pads, 4x4in, 400/pk, 20pk/case (400 per PK )

LabExact Moisture Analysis Binderless Glass Microfiber Pads, 11.0cm dia, 100/pk, 10pk/case (100 per PK )

LabExact Moisture Analysis Binderless Glass Microfiber Pads, 4x4in, 400/pk (400 per PK )

LabExact Moisture Analysis Binderless Glass Microfiber Pads, 4x4in, 400/pk, 40pk/case (400 per PK )

LabExact Moisture Analysis Binderless Glass Microfiber Pads, 9.0cm dia, 200/pk (200 per PK )

LabExact Moisture Analysis Binderless Glass Microfiber Pads, 9.0cm dia, 200/pk, 20pk/case (200 per PK )