Funnels

Funnels Weighing / Transfer Funnel GPI Thread Size 20-400. Approx. Overall Height x Width (mm) 22 x 50 Designed for use with KONTES micro volumetric flasks. Ideal for the easy transfer of liquids or powders. Flat bottom allows weighing. (1 per EA)

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware Support Type Fritted Glass. Graduated FunnelCapacity (mL) 15. Filter Size (mm) 25. Approx. (1 per EA)

Filtration Microfiltration Assembly 25 mm with Stainless Steel Support Ultra-Ware Support Type Stainless. Graduated FunnelCapacity (mL) 15. Filter Size (mm) 25. Approx. (1 per EA)

Funnel/Support Assembly 47mm Glass Support For use with Millipore filtering manifolds. With coarse fritted-glass support base 300mL graduated funnel aluminum clamp number 8 silicone stopper. Clamp sandwiches filter between funnel and base. 35mm prefilter. 9.6cm2 filter area. (1 per EA)

Filtration Microfiltration Assembly 47 mm with Glass Support Ultra-Ware Glass Funnel 47 mm 100 mL Capacity These vacuum microfiltration assemblies are designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. (1 per EA)

Filtration Microfiltration Assembly 47 mm with PTFE-Faced Fritted Glass Support Ultra-Ware (1) PTFE-Faced Glass Funnel 47 mm 300 mL Used when autoclaving with the filter in place. The PTFE coating prevents the membrane from adhering to the ground glass surface. (1 per EA)

Filtration Microfiltration Assembly 90 mm with Fritted Glass Support Ultra-Ware (1) Glass Funnel 90 mm1000 mL The 90 mm vacuum microfiltration assemblies are designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. (1 per EA)

ULTRA-WARE Funnel/Support Assembly 47mm Stainless Steel Support Mounts in Millipore filtering manifolds. Removable 316 stainless screen filter support. Aluminum clamp sandwiches filter between funnel and base. With 300mL funnel. Diameter: 76mm. Height: 229mm. (1 per EA)

Detectable ladle, long handle, 30ml, PS, sterile (10 per PK )

Detectable liquid funnel PS, Ø100mm, blue, sterile (10 per PK )

Sampling scoop, long handle, 50ml, Bio-PE, sterile (10 per PK )

Sampling scoop, long handle, 100ml, Bio-PE,sterile (10 per PK )

The stainless steel filling funnel makes it easy to fill and transfer free flowing powders, liquids and low viscosity media. An air vent on the discharge tube ensures complete and unobstructed flow. (1 per EA )

EZBio Stainless Steel Funnel, 316 L SS, 250 mm, With Steel Handle, 1/EA (1 per EA )

EZBio Stainless Steel Funnel, 316 L SS, 300 mm, With Steel Handle, 1/EA (1 per EA )

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C. (10 per RL )

PTFE hoses resist almost all chemicals and offer the lowest friction coefficient of all polymers, with excellent non-stick and residual emptying properties. They are odorless, non-flammable, smoke-free, and resistant to ageing and UV radiation. (5 per RL )

The PE hose is physiologically harmless, resistant to acids, alkalis, salts and a variety of solvents, pressure-resistant, flexible, impact-resistant, lightweight, pressure-resistant, deformation-resistant up to + 80°C. (100 per RL )

Measuring cup AISI 304 with handle/spout, 500 ml (1 per EA )

Measuring cup AISI 304 with handle/spout, 250 ml (1 per EA )

LevGo® Eco-smartFunnel™ Disposable Paper Micro Funnels, White (25 per PK )

Funnel Dropping - Cylindrical, cap. 250ml, socket size 29/32, borosilicate glass, graduated cylindrical with glass stopcock & interchangeable plastic stopper (1 per EA )

Plastic utility funnels are inexpensive, lightweight and designed for general use. They are made of polypropylene and high density polyethylene depending on the size. (12 per CS)

Funnel Separating - Gilson, cap. 250ml, Socket size 29/32, borosilicate glass with glass stopcock (1 per EA )