Flasks

Flask with round bottom, cap. 250ml, borosilicate glass, one oblique neck with joint, socket 24/29, side socket 14/23 (1 per EA )

Flasks Volumetric with Glass Stopper Class - B, 1000 ml White Graduation (1 per EA )

Conical Polypropylene Flask - 250ml Narrow neck (1 per EA )

Flask Boiling with joint 1000ml, socket size 29/32, round bottom, interchangeable joint, single neck, borosilicate glass (1 per EA )

Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. (1 per EA)

Blades and impeller assemblies are use for cell culture. Reduces shear in delicate cell culture. Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Blade dimension: 5 3/4 x 2". Shaft oal: 17". MARINE IMPELLER INCLUDES 1/2" SHAFT AND IMPELLER BLADE OMNI AND Z-Z PADDLES ARE ONE PIECE WELDED, 1/4" SHAFT (1 per EA )

Flask Erlenmeyer Sterile Flat, PC 125mL (24 per PK)

Flask Volumetric w/ Snap Cap class A 200ml Blue graduation (1 per EA )

Boiling, round bottom flasks with ground glass joints. Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. Ideal for boiling, heating and mixing in the la (1 per EA)

Description: Glass Ball Impeller Assembly Only Size: 250mL Screw Cap: Blue PP, 70mm OD x 22.4mm T Cap Seal: Teflon, 67.9mm OD x 9.1mm T Sealing Ring: Blue silicone rubber, 66.7mm OD x 47.6mm ID x 4.76mm T Flex Tube: Soft silicone, 41.3mm OAL, 0.312” OD x 0.248” ID Magnet Tube: Type 1 Class A Borosilicate Glass, 95mm OAL, 28mm OD ball, houses one cast alnico magnet (1 per EA )

Flasks Volumetric with Glass Stopper Class - B, 50m White Graduation (1 per EA )

These Erlenmeyer Shaker Flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo Flasks only). The polypropylene screw caps are vented with 0.2µm membranes to increase air transmission and enhance cell growth. The mouth size conforms with international SBS standards, for quick, secure connection to bioreactor equipment. Polycarbonate Flasks and Jumbo Fernbach Flasks have baffled (ribbed) bottoms to provide increased oxygenation and mixing efficiency, even at lower shaking speeds. All flasks, regardless of size or material are individually wrapped and gamma sterilized to SAL 10-6, and are free of RNase, DNase, pyrogen m endotoxins and human DNA. (12 per CS )

SIBATA Glass Erlenmeyer Flask, 300 mL (10 per PK )

3L bioreactor vessel 145 x 250mm, round bottom. Heavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with CellTrol II only single or dual system and speed control modules. (1 per EA )

200mm large flange headplate 10-port 6@ 1/4" OD 4@ 1/2" OD 1 center for drive motor 1964-90115 1/4" compression fitting 1964-90120 1/2" compression fitting 1964-90125 5/16" compression fitting (thermowell) Headplates are used with the large flange vessels to seal and to also provide ports for access to the interior of the vessel. The 18-port headplate is most used since more components can be fitted into its ports. The impeller is always positioned in the center drive port and a variety of components i.e. probe (1/2"), harvesting tubes (1/4" or 1/2"), thermowells (5/16") can be added as needed. Headplates and all stainless components of the bioreactor systems are electropolished to seal the surface against bacterial contamination that might occur with a rough surface. O-ring replacements: a554-30 6 each a554-42 4 each a554-13 1 each (1 per EA )

Manufactured from Type 1 Class A Borosilicate Glass with rigidly controlled baffle angles and depths. The 3 side baffles are used to promote optimal oxygen transfer while reducing vortex formation. Has a break resistant lip to resist chipping and is designed for use with orbital shakers. Specifications: Type 1 Class A Borosilicate Glass Sizes: 250ml Dimensions: 80x140mm Case Quantity: 12 (12 per CS )

Flask Boiling with joint 250ml, socket size 19/26, round bottom, interchangeable joint, single neck, borosilicate glass (1 per EA )

Flask Vol. With Plastic Stopper 2000ml Class A (1 per EA )

Flask Erlenmeyer w Blue Cap, PP 125mL (6 per CS)

Flask Erlenmeyer w Blue Cap, PP 500mL (6 per CS)

Flask, Erlenmeyer, Globe Glass, 125mL, Narrow Mouth, Dual Graduations, ASTM E1404 (48 per CS)

Flasks Volumetric with Glass Stopper Class - B, 200ml White Graduations (1 per EA )

Flask, Volumetric, Wide Mouth, Globe Glass, 25mL, Class A, To Contain (TC), ASTM E288 (12 per CS)

Our boiling flasks are made from low-expansion borosilicate glass. Feature uniform wall thickness for superior mechanical strength and shock resistance. (6 per PK )