This category covers plastic bottles and jars for storing reagents, samples and solutions, from 2 mL sample cups and 8 mL Boston rounds to 5 L storage bottles and 4000 mL wide mouth jars. Materials include HDPE, LDPE, polypropylene, polystyrene and polycarbonate, in narrow mouth, wide mouth, Boston round, square and graduated styles, with natural and amber options. It also includes wash bottles pre-labeled for distilled or deionized water, acetone, ethanol, methanol and isopropanol, sterile polycarbonate storage bottles, samplers with graduated bottles, and precleaned jars with lined closures.
Match the plastic to the contents: HDPE and polypropylene resist most aqueous solutions, acids and bases, polypropylene can usually be autoclaved, and LDPE is soft enough for squeeze bottles. Choose narrow mouth bottles for pouring liquids and wide mouth jars for solids and easy filling. Use amber bottles for light-sensitive contents and sterile or precleaned containers where contamination matters, and check the closure size, liner and pack quantity before ordering.
Bottles and Jars, Plastic: common questions
How many ounces is a 1000 mL bottle?
1000 mL is one liter, or about 33.8 US fluid ounces, a little more than a quart (32 fl oz). Bottle capacities are usually nominal, meaning the bottle holds that amount with some headspace below the neck, so the brimful volume is somewhat larger. When a bottle is labeled in both units, the ounce figure may be rounded.
Which plastic should I choose for lab bottles?
It depends on the contents and how you will clean the bottle. HDPE is rigid and resists most acids, bases and aqueous solutions. Polypropylene has similar chemical resistance and can generally be autoclaved. LDPE is flexible, so it is used for wash and squeeze bottles. Polycarbonate is clear and strong but less resistant to some chemicals. For solvents, check a chemical compatibility chart.
Why are wash bottles labeled and color-coded?
Labeled wash bottles show what they contain, such as acetone, ethanol, methanol, isopropanol or distilled water, with color coding so bottles are not mixed up at the bench. That reduces the chance of rinsing with the wrong liquid or refilling a bottle with an incompatible one. Keep each bottle for the liquid printed on it.
What does precleaned mean for a sample jar?
A precleaned jar has been washed and packaged by the manufacturer so it can be used for sample collection without cleaning it in the lab first, which matters when trace contaminants could affect results, as in environmental testing. Cleaning standards differ between products, so check the product information or certificate to see what the container was cleaned and tested for.
Leak-Resistant Bottle High-Density Polyethylene Wide Mouth 500mL. Durable bottle is ideal for general laboratory use and field sample analysis. Designed with a special pour lip to facilitate safe clean dispensing. Polypropylene cap attached. Cap size: 53-410. Dia.xH: 72x164mm. (48 per CS )
Leak-Resistant Bottle Amber High-Density Polyethylene Wide Mouth 60mL. Ideal storage bottle. Amber in color to protect light-sensitive samples. Designed with a special pour lip to facilitate safe clean dispensing. Polypropylene cap attached. Cap size: 28-410. Dia.xH: 39x88mm.
Leak-Resistant Bottle Amber High-Density Polyethylene Wide Mouth 125mL. Ideal storage bottle. Amber in color to protect light-sensitive samples. Designed with a special pour lip to facilitate safe clean dispensing. Polypropylene cap attached. Cap size: 38-410. Dia.xH: 51x98mm. (72 per CS )
Leak-Resistant Bottle Amber High-Density Polyethylene Wide Mouth 1000mL. Ideal storage bottle. Amber in color to protect light-sensitive samples. Designed with a special pour lip to facilitate safe clean dispensing. Polypropylene cap attached. Cap size: 63-415. Dia.xH: 91x199mm. (48 per CS )
Leak-Resistant Bottle Polypropylene Wide Mouth 30mL. For general laboratory use. Features a special pour lip to facilitate safe clean dispensing. Autoclavable. Before autoclaving set cap on top of bottle without engaging threads. Polypropylene cap attached. Cap size: 28-410. Dia.xH: 33x69mm.
Leak-Resistant Bottle Polypropylene Wide Mouth 500mL. For general laboratory use. Features a special pour lip to facilitate safe clean dispensing. Autoclavable. Before autoclaving set cap on top of bottle without engaging threads. Polypropylene cap attached. Cap size: 53-410. Dia.xH: 72x164mm.
LDPE Dropping Bottles Natural. With Streaming Tips & Polypropylene caps. Filter tips have a pore size of 20 to 30 microns. Designed to be used with Wheaton Dropping Bottles to remove particulates when delivering liquids 7ml. 19 x 63 mm Cap Size:15-415. (144 per CS )
LDPE Dropping Bottles Natural. With Streaming Tips & Polypropylene caps. Filter tips have a pore size of 20 to 30 microns. Designed to be used with Wheaton Dropping Bottles to remove particulates when delivering liquids 15ml. 25 x 78 mm Cap Size:15-415. (144 per CS )
LDPE Dropping Bottles Natural. With Streaming Tips & Polypropylene caps. Filter tips have a pore size of 20 to 30 microns. Designed to be used with Wheaton Dropping Bottles to remove particulates when delivering liquids 60ml. 39 x 101 mm Cap Size:20-410. (144 per CS )
Low Density Polyethylene (LDPE) Bottles With Foamed Polyethylene Lined Caps 7mL Screw cap size: 15-415. Narrow mouth impact-resistant bottles are both translucent and flexible. PE lined cap produces an excellent seal and prevents cap back-off. (144 per CS )
Low Density Polyethylene (LDPE) Bottles With Foamed Polyethylene Lined Caps 15mL Screw cap size: 15-415. Narrow mouth impact-resistant bottles are both translucent and flexible. PE lined cap produces an excellent seal and prevents cap back-off. (144 per CS )
Low Density Polyethylene (LDPE) Bottles With Foamed Polyethylene Lined Caps 30mL Screw cap size: 20-410. Narrow mouth impact-resistant bottles are both translucent and flexible. PE lined cap produces an excellent seal and prevents cap back-off. (72 per CS )
Low Density Polyethylene (LDPE) Bottles With Foamed Polyethylene Lined Caps 60mL Screw cap size: 20-410. Narrow mouth impact-resistant bottles are both translucent and flexible. PE lined cap produces an excellent seal and prevents cap back-off. (72 per CS )
Redi-Pak HDPE Cylinder Rounds With Foamed Polyethylene Lined Caps 1oz(30mL) Screw cap size: 20-410. 12lb/Case. Bottles are ideal containers for storing shipping and packaging. Polyethylene provides translucency plus rigid durable construction. (72 per CS )
Redi-Pak HDPE Cylinder Rounds With Foamed Polyethylene Lined Caps 2oz(60mL) Screw cap size: 20-410. 12lb/Case. Bottles are ideal containers for storing shipping and packaging. Polyethylene provides translucency plus rigid durable construction. (72 per CS )
High Density Polyethylene (HDPE) Bottles White With Foamed Polyethylene Lined Caps 30mL Screw cap size: 20-410. White high density polyethylene construction helps protect light (UV) sensitive products. Pharmaceutical companies use white more than any other colored plastic bottles. (72 per CS )
High Density Polyethylene (HDPE) Bottles White With Foamed Polyethylene Lined Caps 60mL Screw cap size: 20-410. White high density polyethylene construction helps protect light (UV) sensitive products. Pharmaceutical companies use white more than any other colored plastic bottles. (72 per CS )
High Density Polyethylene (HDPE)Serum Bottles 30mL Mouth IDxOD: 13x20mm. Widely used for animal health products and safety storage of non-medical products requiring a rubber stopper and aluminum seal. (200 per CS )