Containers

Black Phenolic Cap 38-400 with a pulp/tinfoil liner. Caps are sold 144 per case in 12 bags of 12. (144 per CS )

Stoppers Glass Hollow Hex Head [standard taper] Full Length [standard taper] Joint 24/40 Hollow hexagonal head [standard taper] stopper. May be set on the flattened top to avoid contamination of the ground surface. (1 per EA)

ULTRA-WARE Flask Cap For use with ULTRA-WARE Microfiltration Apparatus. Standard tape. 40/35 outer joint. (1 per EA)

KONTESbrand HPLC Cap System Economy 3-Hole Cap Only ULTRA-WARE. The cap body is manufactured from PTFE and is supplied with a TFE/propylene o-ring and a polypropylene screw collar. The connecting threads on the top of the cap use standard 1/4-28 flangeless fittings. Two of the ports have 1/8 through holes the third port h (1 per EA)

Colored Starline Caps For Starline Narrow Mouth Containers Red Screw cap size: 13-425. New polypropylene caps are available in natural white red blue and green. Superior Double Seal Closure. Guaranteed to be leakproof. No-Drip Pour Lip. For safe clean dispensing. (72 per CS )

Colored Starline Caps For Starline Narrow Mouth Containers Red Screw cap size: 20-410. New polypropylene caps are available in natural white red blue and green. Superior Double Seal Closure. Guaranteed to be leakproof. No-Drip Pour Lip. For safe clean dispensing. (72 per CS )

Colored Starline Caps For Starline Narrow Mouth Containers Blue Screw cap size: 28-410. New polypropylene caps are available in natural white red blue and green. Superior Double Seal Closure. Guaranteed to be leakproof. No-Drip Pour Lip. For safe clean dispensing. (72 per CS )

Colored Starline Caps For Starline Narrow Mouth Containers Blue Screw cap size: 38-430. New polypropylene caps are available in natural white red blue and green. Superior Double Seal Closure. Guaranteed to be leakproof. No-Drip Pour Lip. For safe clean dispensing. (72 per CS )

White Plastic Screw Cap With polyethylene screw cap. White plastic screw caps fit Wheaton vials (66021-679 series) and other glass scintillation vials. Suitable for marking. Size: 22mm. (1000 per CS )

White Polypropylene (PP) Caps With Foamed Polyethylene Liners Screw cap size: 20-410 Caps have multi-purpose liners for use with neutral pH to mild acid and alkali solutions. (200 per CS )

Polypropylene Dropper Tip Caps Screw cap size: 15-415 Blue Convenient lab packs for laboratory trials or where smaller quantities are needed. Colored caps facilitate rapid identification of individual samples and allow for coding of multiple product lines. Autoclavable. (100 per CS )

Polypropylene Dropper Tip Caps Screw cap size: 15-415 Gray Convenient lab packs for laboratory trials or where smaller quantities are needed. Colored caps facilitate rapid identification of individual samples and allow for coding of multiple product lines. Autoclavable. (100 per CS )

Polyethylene Snap-Cap With PTFE septum. Clear 11mm snap-cap eliminates the need for crimping and decapping tools. Provides a large target area for needle penetration. Gives a positive seal. Easy removal. For high volume quick turnaround sampling. Not for long-term sample retention. (1000 per CS )

Autosampler Open-Top Cap Black phenolic cap permits access to vial contents with a syringe. GPI thread size: 15-425.

Septa For Caps with Open Tops. For cap size 22mm. PTFE faced Silicone. Plain Septa. (100 per CS )

Autoclavable Caps White Autoclavable Open-Top Caps Have A Bonded Teflon-Faced Silicone Liner Making Them Ideal For Storage And Retrieval Of Volatile Solvents Sensitive Compounds And Corrosive Chemicals. The Liners Consist Of 0.055 in Of Silicone. (500 per CS )

NextGen V-Vials have a new fire glazed bottom protects against glass particulates while the new low particulate packaging protects against contamination during transportation and storage. These sturdy vials have a conical interior bottom that allows for maximum retrieval of contents. (6 per CS )

Cryule Vials Glass For preservation of biological materials with LN2 (gas phase only). Low-extractable borosilicate glass. For storage at low temperatures and rapid thawing. Meets ASTM Type I Class A and USP Type I standards. Capacity: 1.2mL. Dimensions: 11.8dia.x58Hmm. Approx OD at Top: 5mm. (144 per CS )

Glass Cryules Pre-Scored 1.2mL Approx OD at Top: 5mm. Glass cryogenic vials for preservation of biological materials with liquid nitrogen. (144 per CS )

TITESEAL Shell Vial with Plug-Style Cap Clear N-51 borosilicate glass. With plug-style polyethylene needle closures. Vials and caps packed separately. Vials are shrink-wrapped trays of 200 caps are bulk-packed in plastic bags. Capacity: 1ml. ODxLength: 8x43mm. (2000 per CS )

KIMAX Sample Vial KG-33 borosilicate glass. With PTFE-lined solid-top screw caps attached to vials. Capacity: 4ml. OD x Length: 15x47mm. GPI thread finish: 13-425. (144 per CS )

KIMAXbrand Sample Vial Clear KG-33 Borosilicate Glass Screw Thread with Black Phenolic Polyseal Cone Closure Attached Capacity (mL) 40 O.D. (mm) 28 Length (mm) 98 GPI Thread Finish 24-400. (72 per CS )

Caps closures for Scintillation Vial White Polyethylene GPI Thread Finish 22-400 Replacement cap for 74511 only. Closure is made from white polyethylene and is linerless. Top is suitable for marking. Closures are packed 100 pieces per plastic bag 10 bags per case.

Sample Vial Wheaton-33 low extractable borosilicate glass. Can be sterilized and stored at low temperatures. Fits 66011-325 M-T Vial File. Capacity: 4ml. ODxLength: 15x45mm. GPI thread finish: 13-425. Packed in Lab-File cases. (200 per CS )