Containers

Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS )

Eisco Class A Glass Volumetric Flasks with Stoppers, 1000 mL (1 per EA )

Eisco Class A Glass Volumetric Flasks with Snap Cap, 1000 mL (1 per EA )

1000ml PETG Erlenmeyer Flask, with Baffles, Vent Cap, Sterile,1/pk, 6/cs (6 per CS )

30mL PETG Square Media Bottles, Sterile, double bagged bulk packaging, 40/pk, 280/cs (280 per CS )

The raw materials, premium polypropylene (PP)/polyethylene (HDPE), have excellent physical and chemical indicators and very good pressure-resistance, impact-resistance and acid and alkali resistance. PP materials can undergo autoclave sterilization at 121 ; HDPE can be stored at -80 . A full range of choices to meet different packaging and storage requirements. Washing-free, no need for tedious pre-cleaning processing work, ready to use, greatly improves the packaging effect of users. Thickened middle packaging to ensure transportation and storage safety. Use of professional leaking-proof design for bottle mouth, with no need for inner cover or inner gasket for protection, excellent sealability. Guarantee of being 100% leaking-proof to ensure safety even during air transportation; wide-mouthed design for easy access of liquid. No biotoxicity, pyrogen-free, DNAse/RNAse-free, manufactured in a 100-thousand grade clean plant. The sterile plastic bottles are sterilized using GAMMA-ray. Introduction of imported digital-controlled production equipment with high precision; the products have fine details and comfortable touch, the body walls of which are even with high gloss, with no color difference; high uniformity between different batches. With respect to the process, high-class molding technologies and surface processing technologies are used, leading to smooth interior and exterior surfaces of the plastic bottles without wicking effect of reagents, subsequently significantly reducing sample wastage; the products have high interchangeability with imported ones, can be used to replace the imported ones. (200 per CS )

1000ml Wide Mouth Round Storage Bottle, Natural Color, HDPE, non-Sterile, 5/pk, 50/cs (50 per CS )

1000mL PC Square Storage Bottles, Sterile, Tray-Packed, 12/pk, 24/cs (24 per CS )

15ml Narrow Mouth Round Storage Bottle, Natural Color, HDPE, non-Sterile, 20/pk, 400/cs (400 per CS )

EZgrip® 5L (1 Gal) HDPE Space Saving Carboy with With Spigot, 83mm (83B) VersaCap and 6.9L Max Capacity, Large Pinched Handles, 1/EA (1 per EA)

Burettes - Schellbach Glass with PTFE key Stopcock Class A 100 ml & individual work certificates (1 per EA )

Cylinder Measuring Graduated, cap. 25ml., class 'B', round base with spout, borosilicate glass (1 per EA )

High flow rates and high throughput Precise graduation on the bottle wall Various specifications:Membrane materials include: PES, PVDF CA MCE ; Volume: 250ml 500ml and 1000ml Low protein binding Gamma-ray sterilization Filter diameter: 250ml volume for the 50mm membrane diameter 500ml volume for the 90mm membrane diameter. The design of hose connector is adaptable to various hose diameters. Light weight and firm outer wall structure, easy to grasp (400 per CS )

PC bottle or PEFG bottle Sterilized by E-Beam Nonpyrogenic Individually wrapped in a plastic bag. Both vent caps and plug seal caps are available. Vent caps with 0.22um hydrophobic filters for gas exchange without contamination. (6 per CS )

Molded of high density polyethylene with handle for convenient carrying these plastic lightweight jugs are supplied with 38 mm polypropylene closure for tight seal. (24 per CS)

The vial body is made of medical-grade cryogenic polypropylene (PP), which meets USP Class-6 standards, so that the vial is recommended to be used in -196 liquid nitrogen phase. Dnase/Rnase free, non-endotoxin. Electron beam sterilization, SAL = 10 -6. The product meets the SBS standard and provides an effective safety guarantee and management for biological sample libraries and other warehouses of various chemicals and biological products stored at low temperatures. (480 per CS )

Burettes - Schellbach Glass with PTFE key Stopcock Class A 25 ml & individual work certificates (1 per EA )

Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. Equvalent to Nasco# B01196WA (1000 per CS )

Flask Boiling 100ml, round bottom, wide neck, borosilicate glass (1 per EA )

The raw materials, premium polypropylene (PP)/polyethylene (HDPE), have excellent physical and chemical indicators and very good pressure-resistance, impact-resistance and acid and alkali resistance. PP materials can undergo autoclave sterilization at 121 ; HDPE can be stored at -80 . A full range of choices to meet different packaging and storage requirements. Washing-free, no need for tedious pre-cleaning processing work, ready to use, greatly improves the packaging effect of users. Thickened middle packaging to ensure transportation and storage safety. Use of professional leaking-proof design for bottle mouth, with no need for inner cover or inner gasket for protection, excellent sealability. Guarantee of being 100% leaking-proof to ensure safety even during air transportation; wide-mouthed design for easy access of liquid. No biotoxicity, pyrogen-free, DNAse/RNAse-free, manufactured in a 100-thousand grade clean plant. The sterile plastic bottles are sterilized using GAMMA-ray. Introduction of imported digital-controlled production equipment with high precision; the products have fine details and comfortable touch, the body walls of which are even with high gloss, with no color difference; high uniformity between different batches. With respect to the process, high-class molding technologies and surface processing technologies are used, leading to smooth interior and exterior surfaces of the plastic bottles without wicking effect of reagents, subsequently significantly reducing sample wastage; the products have high interchangeability with imported ones, can be used to replace the imported ones. (200 per CS )

1000 mL PET Square Storage Bottles, Sterile, double bagged bulk packaging, 12/pk, 48/cs (48 per CS )

125ml Narrow Mouth Round Storage Bottle, Natural Color, HDPE, Sterile, 10/pk, 100/cs (100 per CS )

500ml Wide Mouth Round Storage Bottle, Natural Color, PP, Sterile, 5/pk, 50/cs (50 per CS )

500ml Narrow Mouth Round Storage Bottle, Natural Color, HDPE, Sterile, 5/pk, 50/cs (50 per CS )