Chromatography

Chromatography TLC Developing Tank Rectangular with Nonslip Lid CHROMAFLEX TLC Developing Tank Only (1 per EA)

Chromatography TLC Developing Tank Rectangular with Nonslip Lid CHROMAFLEX TLC Nonslip Lid (1 per EA)

Chromatography Sample Diffusion Disc Economy FLEX-COLUMN Sample Diffusion Disc 1.5 cm Sample diffusion discs protect the gel bed from being disrupted during sample application whenever a flow adapter is not used. (1 per EA)

HPLC ULTRA-WARE Fittings Kit THF-Resistant Ferrule for 1.8 mm O.D. This kit contains all of the tube fittings adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons. (1 per EA)

Chromatography Packing Reservoir Threaded Standard CHROMAFLEX For Standard Columns Fits Colums ID (cm) 1.0. Nominal Volume 150 mL The CHROMAFLEX Packing Reservoirs are ideal for packing gel slurries into columns. Each packing reservoir is designed for easy mounting on the CHROMAFLEX Columns. (1 per EA)

HPLC Debubbler Mobile Phase ULTRA-WARE Port Threads 1/4-28 external. Cap GPI Thread 13-425 Unit consists of a glass chamber with inlet and outlet ports and a PTFE-lined phenolic cap. Installed before the pump or mixer the debubbler captures bubbles that are released by unscrewing the cap. (1 per EA)

Extraction SPE Disk Glassware and Manifolds SPE Support Base 47 mm All SPE Manifolds are supplied with three-way valves that allow the venting to atmosphere of each station without affecting the vacuum in the rest of the system. (1 per EA)

KIMAXbrand Aluminum Seal Open Top Color Coded Aluminum Seal Tear Out Blue Fits GPI Serum Finish 20 mm

KIMAXbrand Aluminum Seal Closure Button TopUnlinedFlip/Tear OffColor Coded Fits GPI Aluminum Seal Finish 13 Color blue

Septum fluoropolymer resin-faced gray butyl. A special molded seal with fluoropolymer resin insert. Sealing surfaces of butyl and fluoropolymer resin effect a more positive seal than plain fluoropolymer resin-faced septum. For mouth OD: 20mm. (100 per CS )

Red Aluminum Seal One-Piece Shelf packs of 100. Fits GPI finish: 11mm.

Standard Aluminum Seal One-Piece Shelf packs of 100. Fits GPI finish: 20mm. (1000 per CS )

Aluminum Seal Blue. Center disc tear-out. Unlined. One-piece center disc tears out exposing top of stopper to syringe. Shelf packs of 100. For mouth OD: 13mm.

Aluminum Seal Tear-off. Green. Stopper can be punctured by syringe or seal can be completely removed and contents poured from bottle. Shelf packs of 100. For mouth OD: 13mm. (1000 per CS )

Aluminum Seal Tear-off. Green. Stopper can be punctured by syringe or seal can be completely removed and contents poured from bottle. Shelf packs of 100. For mouth OD: 20mm.

Aluminum Seal Tear-off. Stopper can be punctured by syringe or seal can be completely removed and contents poured from bottle. Shelf packs of 100. Standard. For mouth OD: 30mm.

Aluminum Seal with PTFE/Red Rubber Liner For mouth OD: 11mm. Red. (1000 per CS )

Aluminum Seal Center disc tear-out. fluoropolymer resin/red rubber septum. Faced with 2 mil fluoropolymer resin film. For filling or emptying contents with a syringe. Shelf packs of 100. Standard. For mouth O.D.: 13mm.

EZwaste® HPLC Solvent Waste System, Replacement Fittings, 1/2 Inch OD Tube Fittings, Blue Nut with Yellow Ferrule, 1/2-20 Thread, 4/PK (4 per PK )

EZwaste® HPLC Solvent Waste System, Replacement Fittings, Carbon Filter Port Fittings, Black Straight Threaded Union Fitting, 1/4 Inch MNPT Thread, 10/PK (10 per PK )

EZwaste® HPLC Solvent Waste System, Replacement Fittings, Plugs for Hose Barb Ports, Black Plug, 1/8 Inch MNPT Thread, 25/PK (25 per PK )

EZwaste® HPLC Solvent Waste System, Replacement Fittings, 1/8 Inch OD Tube Fittings, Blue Nut with Yellow Ferrule, 1/4-28 Thread, 6/PK (6 per PK )

EZwaste® 110 HPLC Solvent Waste System, ¼-28 Thread Size Replacement Chemical Exhaust Filter with Indicator, Activated Carbon, 25/CS (25 per Cs )

EZWaste® HPLC VersaCap® 53mm (53B) Solvent Waste System, Cap-Only W/ Exhaust Filter, Six (6x) Ports for OD Tubing 3.2 mm (1/8") or 1.6 mm (1/16"), 1/EA (1 per EA )