Acids High Purity

Nitric Acid, TraceGrade is a strong, highly corrosive mineral acid with extremely low metal content (over 50 with levels less than 1 PPB). This grade is primarily used as an analytical reagent in elemental analysis determinations using ICP and AA techniques, digestion of water samples and as a doping agent for organic semiconductors.

(1 per EA)

Acetic Acid, Glacial, TraceGrade also known under the name ethanoic acid, it is an organic compound and a colorless liquid. It has a distinctive sour taste and pungent smell. It is the main component of Vinegar after water (8% by volume). Classified as a weak acid, when concentrated it is corrosive and can attack the skin. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(4 per CS )

Nitric Acid, Ultratrace is a strong, highly corrosive mineral acid with extremely low metal content (over 50 with levels less than 100 PPT). This grade is primarily used as an analytical reagent in elemental analysis determinations using ICP and AA techniques, digestion of water samples and as a doping agent for organic semiconductors.

(1 per EA)

Hydrofluoric Acid, Ultratrace (1 per EA )

Perchloric Acid, Ultratrace is an inorganic acid that is usually found as an aqueous solution. Perchloric acid is a stronger acid than sulfuric and nitric acids and it is a powerful oxidizer when heated. At room temperature, it is generally safe at concentrations under 70%. Perchloric acid is used for preparing perchlorate salts and is important in rocket fuel. Perchloric acid should be handled with care, it is dangerously corrosive and readily forms potentially explosive mixtures. Spectrum’s Ultratrace grade products are suitable for use in ultratrace elemental analysis.

(1 per EA )

Nitric Acid, Ultratrace is a strong, highly corrosive mineral acid with extremely low metal content (over 50 with levels less than 100 PPT). This grade is primarily used as an analytical reagent in elemental analysis determinations using ICP and AA techniques, digestion of water samples and as a doping agent for organic semiconductors.

(1 per EA )

Perchloric Acid, TraceGrade is a strong mineral acid (stronger than both sulfuric and nitric acid) under some circumstances it may act as an oxidizer possibly present an explosion hazards when hot; its aqueous solutions up to approximately 70% and room temperature are generally safe, only showing strong acid features and no oxidizing properties. It is used as an etchant in the electronics industry. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(1 per EA )

Chloroplatinic Acid 99.9%Trace, 5.00 g Glass amber (1 per EA )

Acetic Acid, Glacial, TraceGrade also known under the name ethanoic acid, it is an organic compound and a colorless liquid. It has a distinctive sour taste and pungent smell. It is the main component of Vinegar after water (8% by volume). Classified as a weak acid, when concentrated it is corrosive and can attack the skin. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(6 per CS )

Hydrofluoric Acid, 48% Trace, 250.00 mL Poly natural (1 per EA )

Sulfuric Acid, Ultratrace is an extremely corrosive acid that comes as a yellowish slightly viscous liquid. It is soluble in water and is a diprotic acid. It has very strong corrosive, dehydrating and oxidizing properties as well as being hygroscopic. It uses range from detergent production, antifreeze, pharmaceuticals and fertilizers to cellophane, lubricants and production of explosives. Spectrum’s Ultratrace grade products are suitable for use in ultratrace elemental analysis. These materials meet or exceed the specifications as listed in Reagent Chemicals published by the American Chemical Society.

(1 per EA )

Nitric Acid, Ultrapure, Reagent, is a strong and highly corrosive mineral acid. Primarily used as a reagent, the pure compound is colorless and used for nitration, typically to an organic molecule.

(1 per EA )

Hydrofluoric Acid, TraceGrade is a highly corrosive solution of hydrogen fluoride in water is capable of dissolving a wide range of materials including oxides and glass. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(1 per EA )

Hydrochloric Acid, Ultratrace is a strong, highly corrosive mineral acid with extremely low metal content (over 64 with levels less than 100 PPT). This grade is primarily used as an analytical reagent in elemental analysis determinations using ICP and AA techniques, digestion of water samples and as a doping agent for organic semiconductors.

(1 per EA )

Hydrofluoric Acid, TraceGrade is a highly corrosive solution of hydrogen fluoride in water is capable of dissolving a wide range of materials including oxides and glass. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(1 per EA )

Hydrofluoric Acid, TraceGrade is a highly corrosive solution of hydrogen fluoride in water is capable of dissolving a wide range of materials including oxides and glass. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(4 per CS )

Hydrofluoric Acid, TraceGrade is a highly corrosive solution of hydrogen fluoride in water is capable of dissolving a wide range of materials including oxides and glass. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(6 per CS )

Perchloric Acid, TraceGrade is a strong mineral acid (stronger than both sulfuric and nitric acid) under some circumstances it may act as an oxidizer possibly present an explosion hazards when hot; its aqueous solutions up to approximately 70% and room temperature are generally safe, only showing strong acid features and no oxidizing properties. It is used as an etchant in the electronics industry. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(6 per CS )

Acetic Acid, Glacial, TraceGrade also known under the name ethanoic acid, it is an organic compound and a colorless liquid. It has a distinctive sour taste and pungent smell. It is the main component of Vinegar after water (8% by volume). Classified as a weak acid, when concentrated it is corrosive and can attack the skin. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(1 per EA )

Perchloric Acid, TraceGrade is a strong mineral acid (stronger than both sulfuric and nitric acid) under some circumstances it may act as an oxidizer possibly present an explosion hazards when hot; its aqueous solutions up to approximately 70% and room temperature are generally safe, only showing strong acid features and no oxidizing properties. It is used as an etchant in the electronics industry. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(1 per EA )

Hydrochloric acid 34 -37% Trace grade - 2.5L, CAS#7647-01-0 (1 per EA )

Dilute Mixed Acids (Trace Met), 20.00 L Cubitainer (1 per EA )

Hydrochloric Acid, Ultratrace is a strong, highly corrosive mineral acid with extremely low metal content (over 64 with levels less than 100 PPT). This grade is primarily used as an analytical reagent in elemental analysis determinations using ICP and AA techniques, digestion of water samples and as a doping agent for organic semiconductors.

(1 per EA )

Perchloric Acid, TraceGrade is a strong mineral acid (stronger than both sulfuric and nitric acid) under some circumstances it may act as an oxidizer possibly present an explosion hazards when hot; its aqueous solutions up to approximately 70% and room temperature are generally safe, only showing strong acid features and no oxidizing properties. It is used as an etchant in the electronics industry. Spectrum’s TraceGrade products are suitable for use trace metal analysis and provides the lowest levels of metals, organics, and particulates available; giving you improved analytical performance and minimizing repeated runs.

(4 per CS )