Microcentrifuge

Siliconized 0.5mL Flat Top Microcentrifuge Tube (500 per PK)

Snap-Cap Microcentrifuge Tube Volume: 400uL. Tough virgin polyethylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: natural. (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Flat Top Microcentrifuge Tube 0.6mL. Flat top lid forms an extra-tight seal that will not come open during processing. With textured writing surface on top of the caps and needle access. Walls are non-wettable preventing liquids from adhering to the sides. (10000 per CS)

G-Tube Premium Flat Top Microcentrifuge Tube 2.0mL. Flat top lid forms extra-tight seal that wont come open during processingm yet easy-to-open with thumb pressure. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 2.0mL. Lavender color. (10000 per CS)

G-Tube Premium Flat Top Microcentrifuge Tube 2.0mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 30000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Graduated from 0.1 to 2.0mL. Rainbow color. (10000 per CS)

Snap-Cap Microcentrifuge Tube Volume: 1.5mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: natural. (10000 per CS)

Siliconized 0.6mL G-Tube, Flat Top Microcentrifuge Tube (10000 per CS)

Siliconized 0.6mL G-Tube, Flat Top Microcentrifuge Tube - Sterile - 50/bag-5 Bags/Pk, Natural, CS5000 (5000 per CS)

Siliconized 1.5mL G-Tube, Flat Top Microcentrifuge Tube - Sterile - Individually Wrapped (5000 per CS)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (5000 per CS)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (5000 per CS)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Natural, PK500 (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)

Snap-Cap Microcentrifuge Tube Volume: 1.5mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: natural. (1000 per PK)

Snap-Cap Microcentrifuge Tube Volume: 1.5mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121[degree]C at 15psi for 15 minutes. Color: yellow. (1000 per PK)

Bio Plas Screw-Cap Microcentrifuge Tubes are ideal forany sample-processing or storage application and for working with valuable or hazardous cells and materials. Transparent polymer lets you see your sample clearly. The strength, safety, and reliability, of the Bio Plas Screw-Cap Microcentrifuge Tubes let you perform procedures that simply can’t be done with many other tubes. Spin them, store them, transport them (even by air). Boil, irradiate them. They’ll stand up to the test! Screw Cap Microcentrifuge Tube Features: Sample Integrity: EPDM O-Rings create a positive seal to prevent leaking during processing, storage, or transport. Tubes made of inert virgin, high-clarity, ultra-pure, polypropylene to minimize risk of altering samples. Will withstand maximum G-forces up to 20000 x g. Sturdy and Reusable: Ideal for freezer storage, boiling,utoclaving and irradiation. Will withstand temperature ranges of -196°C to +121°C. Free of detectable DNase, RNase, DNA, PCR inhibitors, and endotoxins. Note: not suitable for immersion in liquid nitrogen. Ideal for boiling application Inside the Screw Cap the O-Ring forms a secure and leak-proof seal. The Bio Plas Screw-Cap Microcentrifuge Tube’s square threads won’t strip and they are on the outside of the tube, so you minimize the risk of contaminating your sample or letting it contaminate the Lab Tech (500 per CS)