Centrifuge Tubes

Microcentrifuge Tube, 2.0mL, PP, Attached Snap Cap, Graduated, Orange, Certified: Rnase, Dnase and Pryogen Free, 500/Stand Up Zip Lock Bag, PK500 (500 per PK)

The G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)

Tubes Centrifuge Heavy Duty with Screw Cap Capacity (mL) 35. O.D. and Length (mm) 29 x 100. GPI Thread Finish 24-410 KIMAX tube with a heavy wall to withstand higher speeds in centrifuging. Especially useful in separating neutralized sediment for culturing from specimens of sputum. (12 per CS )

Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Yellow, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag (10000 per CS)

Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml Micro Centrifuge Tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide te (8 per PK )

Translucent and Opaque Cap O-rings ensure leak-proof seal, and are a highly visible contrasting color All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

Rack, Snap Together, for 1.5mL and 2.0mL Microcentrifuge Tubes, Reinforced PP, 128-Place, Blue, EA1 (1 per EA)

Microcentrifuge Tube, 0.5mL, PP, Attached Snap Cap, Graduated, Green, Certified: Rnase, Dnase and Pyrogen Free, 500/Stand Up Zip Lock Bag (10000 per CS)

Reversible Rack for Microcentrifuge Tubes, 80-Place for 1.5mL and 2.0mL and Reverse Side is 60-Place for 0.2mL and 0.5mL Tubes, Pink, 5/Pack (25 per CS)

Tubes Centrifuge Graduated Heavy-Duty Cap. (mL) 12. Subdiv. (mL) 0.1. Tolerance (mL) 0 to 0.2 - 0.05Above 0.2 to 1 - 0.10Above 1 to 3 - 0.15Above 3 - 0.20. O.D. and Length (mm) 17 x 118 Standard taper KIMAX tube is a heavy-duty version of 45165. (12 per CS )

Microcentrifuge Tube, 1.5mL, PP, Attached Snap Cap, Graduated, Yellow (10000 per CS)

Reversible Rack for Microcentrifuge Tubes, 80-Place for 1.5mL and 2.0mL and Reverse Side is 60-Place for 0.2mL and 0.5mL Tubes, Orange, 5/Pack (25 per CS)

Centrifuge Tube and Rack sets are a convenient solution for organizing and storing Conical Bottom tubes. Racks are made of expanded polystyrene (EPS) and include holes arranged in a zigzag format for easy dispensing. Racks contain 50 of the 15ml tubes or (500 per PK )

Pack of four polycarbonate racks, each able to hold up to 48 microcentrifuge tubes with 1.5ml capacity. Unique design allows racks to be securely stacked on top of each other. Includes alphanumeric grid for easy identification of tubes. Autoclavable. (4 per PK )

Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml Micro Centrifuge Tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide te (8 per PK )

KIMAX Conical Centrifuge Tube 15ml borosilicate glass conical-bottom tube. Beaded rim for extra strength. White ceramic enamel scale legend and marking spot. Graduated in 0.1ml increments. Length: 118mm. Diameter: 17mm. Maximum RCF: 2980g. (12 per CS )

Tubes Centrifuge Graduated Capacity (mL) 50. Subdivision (mL) 0-10 in 0.5 Above 2 to 10- 0.3. Tolerance (mL) 0 to 2 - 0.2Above 2 to 10 - 0.3 Above 10 - 0.5. O.D. and Length (mm) 29 x 118 KIMAX tube with a short tapered bottom. Graduated and calibrated to contain. Top end has a pour spout. (12 per CS )

KIMAX Heavy-Duty Centrifuge Tube 10ml borosilicate glass conical-bottom tube. Length: 116mm. Diameter: 17mm.Thick walls for high-g spinning. Graduated and calibrated to contain. GPI thread finish: 15-415. Autoclavable. Phenolic resin screw cap with rubber liner (supplied). Maximum RCF: 2980g. (12 per CS )

Tubes Centrifuge Graduated Hopkins Vaccine Capacity (mL) 10. Tolerance Stem 0.0025. Tolerance Body 0.20. O.D. and Length (mm) 17 x 119 KIMAX tube used to standardize vaccines. The stem is graduated at 0.01 mL to 0.05 mL in 0.01 mL subdivisions and the body has graduations at 1 5 and 10 mL.

Premium Grip Cap features molded TPE sealing rings which ensure O-ring will never slip out of place; striped TPE grips on cap edge enable secure handling under all conditions Caps are available in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

Translucent and Opaque Cap O-rings ensure leak-proof seal, and are a highly visible contrasting color All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match (1000 per CS)

High temperature resistivity range–shatter/crack resistant and ideal for boiling Easy 3/4 turn to open and close Caps are available separately in various colors for easy identification and color-coding All caps are compatible with all CELLTREAT Screw Top Micro Tubes; mix and match Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation (1000 per CS)

Snap-N-Rack Tube Rack for 1.5mL and 2.0mL Microcentrifuge Tubes, 100-Place, PP, White, EA1 (1 per EA)

Snap-N-Rack Tube Rack for 1.5mL and 2.0mL Microcentrifuge Tube, 100-Place, PP, Yellow, EA1 (1 per EA)