LPS is a reliable source for affordable laboratory centrifuge tubes. We offer a wide range of products including 5, 10, 15 and 50ml macro tubes as well as a wide range of microcentrifuge tubes and centrifuge bottles to meet your laboratory needs.
If you are looking for glass centrifuge tubes, please see our reusable glassware section. Any other lab needs? We are just a call or email away! Contact us today.
When choosing, check the maximum relative centrifugal force (x g) the tube is rated for against your protocol and rotor; ratings differ between makers and between conical and self-standing designs. Polypropylene suits most aqueous work and resists many solvents, while polycarbonate bottles are clearer but less resistant to some chemicals. Decide between sterile tubes packed in racks or bags and lower-cost bulk non-sterile packs, and between attached and separate caps. Replacement caps for some 15 mL and 50 mL tubes are sold on their own, and a 50 mL centrifuge tube filter is available for sterile filtration.
Centrifuge Tubes: common questions
What is a centrifugation tube?
A centrifugation, or centrifuge, tube is a tube made to withstand the force of spinning in a centrifuge so that solids, cells or denser liquids separate from the rest of the sample. Most disposable tubes are polypropylene with a screw or snap cap, ranging from microtubes of 2 mL or less to conical tubes of 15 mL and 50 mL and bottles of 250 mL or more.
What is the difference between conical and self-standing centrifuge tubes?
A conical tube has a tapered bottom that collects a pellet in a small point, which makes the pellet easier to see and the liquid above it easier to remove. A self-standing, or skirted, tube has a base that lets it stand upright on the bench without a rack. Self-standing tubes are convenient for storage and handling, but check their g-force rating and fit in your rotor.
How much force can a plastic centrifuge tube take?
It depends on the tube's size, material and design, so use the maximum RCF stated by the manufacturer rather than a general figure. Exceeding the rating can crack or deform the tube and cause leaks inside the centrifuge. Also fill tubes within the recommended volume, balance the rotor, and use adapters made for that tube size.
Shop by type: Microcentrifuge · 15 and 50 ML Centrifuge Tubes · Centrifuge Bottles
Top brands: Bio Plas · Globe Scientific · CELLTREAT Scientific Products
Popular Centrifuge Tubes:
Centrifuge Tubes
-
Snap-N-Rack Tube Rack for 1.5mL and 2.0mL Microcentrifuge Tube, 100-Place, PP, BlueSKU: 456304-EAManufacturer: Globe ScientificSnap-N-Rack Tube Rack for 1.5mL and 2.0mL Microcentrifuge Tube, 100-Place, PP, Blue, EA1 (1 per EA)Learn Morewas $35.90 Special Price $26.18 -
Wireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 96-Place, YellowSKU: 456340Y-EAManufacturer: Globe ScientificWireless MicroTube Rack with Handles for 1.5mL and 2.0mL Microcentrifuge Tubes, 96-Place, Yellow, EA1 (1 per EA)Learn Morewas $26.70 Special Price $19.47 -
5mL Macro Centrifuge Tube, Snap-Pop, Green, Non-sterileSKU: 229445G-CSManufacturer: CELLTREAT Scientific Products5mL Macro Centrifuge Tube, Snap-Pop, Green, Non-sterile (100 per CS )Learn Morewas $58.00 Special Price $41.56 -
1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Amber, PK500SKU: 4038S-PKManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (500 per PK)Learn Morewas $120.95 Special Price $105.83 - 1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Natural, PK500, CS10000SKU: 4030S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,419.00 Special Price $2,116.62
- 1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Yellow, PK500, CS10000SKU: 4032S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,419.00 Special Price $2,116.62
- 1.5mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Lavender, PK500, CS10000SKU: 4037S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,419.00 Special Price $2,116.62
-
0.6mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Lavender, PK500, CS10000SKU: 4047S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,419.00 Special Price $2,116.62 -
2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Yellow, PK500, CS10000SKU: 4052S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,470.33 Special Price $2,161.54 - 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Blue, PK500, CS10000SKU: 4053S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,470.33 Special Price $2,161.54
- 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Orange, PK500, CS10000SKU: 4056S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,470.33 Special Price $2,161.54
- 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Amber, PK500, CS10000SKU: 4058S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,470.33 Special Price $2,161.54
- 2.0mL G-Tube, Flat Top Microcentrifuge Tube, Sterile, Rainbow, PK500, CS10000SKU: 4059S-CSManufacturer: Bio PlasThe G-Tube™ Flat Top Microcentrifuge Tube is virtuallytransparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tube™ Flat Top Microcentrifuge Tube cap is closed there will be an audible "snap" that indicates a secure closure has been formed.Made of tough, clear, proprietary formulated polypropylene, the0.6mL, 1.5mL and 2.0mLG-Tube™ has the same chemicalresistant quality as standardtubes, but they're sturdier andvirtually transparent to give abetter view. The flat top cap iseasy to open and still provides amaximum secure seal. All three volumes are available in siliconized material. Siliconized G-Tubes™ are not recommended for autoclaving. The G-Tube™ is built for highimpact usage and willwithstand over 30,000 x g whenspun. Thicker walls make thisthe tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. Willwithstand temperature rangesof -80°C (-112°F) to 121 °C(250°F) (10000 per CS)Learn Morewas $2,536.00 Special Price $2,219.00
-
5mL Flat Top Microcentrifuge Tube, Clear, PK200, CS1000SKU: 4400-CSManufacturer: Bio Plas5mL Flat Top Microcentrifuge Tube, Clear, PK200, CS1000 (1000 per CS)Learn Morewas $455.25 Special Price $398.35 -
5mL Flat Top Microcentrifuge Tube, Sterile (2 bags of 100 tubes per pack), Clear, PK200, CS1000SKU: 4400S-CSManufacturer: Bio Plas5mL Flat Top Microcentrifuge Tube, Sterile (2 bags of 100 tubes per pack), Clear, PK200, CS1000 (1000 per CS)Learn Morewas $612.17 Special Price $535.65 -
Screw cap for 2.0mL microtube, red color, non-sterile, w/ installed O-ring, 1000/bagSKU: C3175-R-CSManufacturer: MTC BioBy popular demand for researchers, as well as diagnostic / reagent packaging applications, MTC’s O-ring screw caps are now available in single color packs of 1000. Order now in blue, green, orange, red, yellow, or natural color. (1000 per CS )Learn Morewas $98.07 Special Price $70.54 -
Tube Cent 15mL Ster Racked 20-BG/25SKU: CT15R-CSManufacturer: DynalonTube Cent 15mL Ster Racked 20-BG/25 (25 per CS )Learn Morewas $172.43 Special Price $116.43 -
Tube Cent 50mL Ster Rack 20-RK/25SKU: CT50R-CSManufacturer: DynalonTube Cent 50mL Ster Rack 20-RK/25 (25 per CS )Learn Morewas $220.77 Special Price $149.05 -
Tube Cent 50mL Self-Stand Ster 20-BG/25SKU: CT50RS-CSManufacturer: DynalonTube Cent 50mL Self-Stand Ster 20-BG/25 (25 per CS )Learn Morewas $285.95 Special Price $193.06 -
0.5mL Flat Top Microcentrifuge Tube, Amber, CS10000SKU: 4320-CSManufacturer: Bio PlasFlat Top Microcentrifuge Tube 0.5mL. Flat top lid forms extra-tight seal easy-to-open with thumb pressure. Withstands 22000xg forces. Textured writing surface on top of caps and sides. Non-wettable walls. Amber color. (10000 per CS)Learn Morewas $443.67 Special Price $388.21 -
Tube 0.5mL stand clr-t/ pur-cap10-BG/500SKU: STSS-509CP-CSManufacturer: DynalonTube 0.5mL stand clr-t/ pur-cap10-BG/500 (5000 per CS )Learn Morewas $786.31 Special Price $530.89 -
Tube 0.5mL stand clr-t/yel-cap 10-BG/500SKU: STSS-509CY-CSManufacturer: DynalonTube 0.5mL stand clr-t/yel-cap 10-BG/500 (5000 per CS )Learn Morewas $786.31 Special Price $530.89 -
Tube 1.5mL stand amber-t/cap 10-BG/500SKU: STSS-510AM-CSManufacturer: DynalonTube 1.5mL stand amber-t/cap 10-BG/500 (5000 per CS )Learn Morewas $828.36 Special Price $559.27 -
Tube 2mL stand amber tube/cap 10-BG/500SKU: STSS-511AM-CSManufacturer: DynalonTube 2mL stand amber tube/cap 10-BG/500 (5000 per CS )Learn Morewas $828.36 Special Price $559.27
Filter
Shopping Options
4L Yellow Buffer Solution pH 7.0 @ 25°C, Poly Bottle
was $74.64 Special Price $21.46
BEAD BATH 20 L, 120 V, TYPE B PLUG, Liters/EA: 20
was $1,794.65 Special Price $1,714.78
LPS 200uL Universal Pipet Tips, Yellow, Bulk, PK1000
was $20.00 Special Price $15.75
How Can We Help?
This is a custom sub-title.
LPS provides procurement services:
Strategic and customized product sourcing services to find the best vendorsUnparalleled customer service from dedicated procurement managers
Custom web portal where you can order items from any vendor on one site
Consolidate orders and invoices
Wholesale “club” pricing for members
Procure-to-Pay software solutions and process consulting
Enterprise procurement solutions designed for small and mid-sized labs