Mixing

Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)

Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. (1 per EA )

Bulk Beads, Zirconium, 0.5mm, Triple-Pure Molecular Biology Grade, 250g, EA /1 (1 per EA)

MAGic Clamp tilted holder for 15mL and 50mL tube racks , max 2 , EA /1 (1 per EA)

Flask holder, foam, 6 x 250ml flasks, for GVM-MULTI (1 per EA)

The Bellco Digital Rocker is a slow speed rocker for general laboratory cell culture experimentation. This Bellco design incorporates a rocking platform that accepts a variety of optional trays. Eight tray models are available, including three equipped with flask clamps for common sizes of flasks. Peg and Grommet style trays make changing convenient. The timer circuit permits automatic shutoff after 3-120 minutes. (1 per EA )

BlotBoy 3D Rocker, fixed speed, 12in. x12in. platform with flat mat, 115V, EA /1 (1 per EA)

MAGic Clamp Tube Rack, 15x50ml, tubes , max. 2 , EA /1 (1 per EA)

Replacement bungee cords for the Digital Orbital Shaker. Comes in packs of 8. (8 per PK )

Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)

901 Intelligent Magnetic Stirrer, speed save and recall, speed range: 0-2300 rpm, max stirring volume: 1000 ml (0.26 gallons) Stirring speed can be saved and recalled, so you won’t lose the exact stirring speed you need any more IP54 waterproof and dustpr (1 per EA )

The Bellco Benchtop Orbital Shakers are ideal for staining and washing electrophoresis gels or for any applications requiring mixing or agitation of solutions. They are engineered to operate between the limits of 30 and approximately 350 revolutions per minute, and to hold their speed at any selected setting to approximately plus or minus five percent. --Speed range: 30 - 350 rpm +/- 5% --Circular orbit: 2.5 cm (1" ) orbit --Load: 11 kg (25 lbs) maximum --Weight: 7.6 kg (17 lbs) --7744-01010, 7744-10220 & 7744-01100 units have a platform deck of 25 x 25 cm --7744-02020, 7744-20220 & 7744-02200 units have a platform deck 50 x 50 cm (1 per EA )

PPT series mixers are an economical solution for in-line mixing. Ideal for mixing applications involving short-life fluids such as adhesives, epoxies, or coatings, PPT series mixers feature helical-style mixing elements which allow for pressure drop efficient mixing of low, medium, and high viscosity fluids across all flow regimes. Chemically resistant polyacetal elements and polypropylene tubing resist many chemical solutions. With multiple element configurations available in each size, there is a PPT series mixer for nearly all small-scale disposable processes. Typical Applications Low, Medium and High viscosity blending Glue / paint / epoxy Colorants and dyes Static mixers are versatile mixing devices that can be used in a wide range of industries and applications beyond those listed above. For questions regarding a disposable mixer to suit your specific application, feel free to Contact Us. Features Housing: Polypropylene Tubing Elements: Helical Style Polyacetal End Connections: Plain End and Brass Male NPT PPT Series mixers are available in both plain end and brass NPT threaded end configurations. Adapt plain end mixers to your process using standard, commercially-available tube compression fittings (not included). (1 per EA)

Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)

For use with sticky matt tape (7740-40000). Dimensions: 20"x20", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt. (1 per EA )

Roto-Therm Plus Incubated Rotator variable speed with tube holders, 115V EA/1 (1 per EA)

For use with sticky matt tape (7740-40000). Dimensions: 10"x10", .050" thick w/ 1/2" lip with pegs. Will fit any Bellco rocker or shaker. Plain tray - no rubber matt. (1 per EA )

Stirrer Shaft 40x0.7 cm Turbine (1 per EA)

Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)

Roller bottle brush for 110 mm od roller bottles w/51 mm opening. Nylon bristles for easy cleaning of hard-to0-reach surfaces. Useable length: 690 MM NOTE: to keep nylon bristles straight & effective dip flattened brush in hot water - then shake out MATERIAL: •Plastic handle •Plastic tube covering shaft •#8 wire - nylon (2 per CS )

MAGic Clamp COMBO, for 125ml, 250ml, 500ml flasks, EA /1 (1 per EA)

Stacking platform, large 12in. x12in. with dimpled mat , 3.0in. separation , EA /1 (1 per EA)

Pre-mounted stainless steel clamps for bellco Erlenmeyer flask. Flask tray fits on top of the standard tray platform. Includes clamps. Flask positions: 9 Size:1l (1 per EA )

The Bellco Top Drive Roller Apparatus has been designed for production of animal cells, viruses and cell products. The unit accommodates 53 bottle positions with over 85,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units incorporate a solid state control with a brushless motor and controller, providing smooth operation and easy maintenance. All units feature rubber bumpers, handles, a slotted rear guard, and All Position Drive. The All Position Drive is designed to accommodate plastic roller bottles by preventing the slipping of the light-weight bottles. An optional Motion Alarm System provides audible and visual alarms should the primary fail. (1 per EA )