Equipment

This 5g mass is made of brass with nickel-plated surfaces. Tested and calibrated for accuracy. Not certified. (1 per EA)

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Ever (1 per EA)

These new Bottle Top Dispensers are priced significantly better than virtually anything of its type. The dispensers feature a 30mm thread and come complete with five additional adapters (sizes 28mm, 32mm, 36mm, 40mm and 45mm) allowing customers to use the (1 per EA)

Set of 10 hooked weights are made of high-quality stainless steel. Includes one of 200g, two of 100g, three of 50g, and four of 20g weights. (1 per EA)

1-pound hexagonal mass is made of steel and features a durable black oxidized finish. Accurate and non-rolling. Suitable for ages 11+. (1 per EA)

Pack of 5 replacement flints for Gas Lighter (GSLT01). (5 per PK )

This 2g mass is made of brass with nickel-plated surfaces. Tested and calibrated for accuracy. Not certified. (1 per EA)

Deluxe slotted weight set with rack, 12 weights, brass/aluminum. Includes 1x500g, 2x200g, 1x100g, 1x50g, 20g, 1x10g, 1x5g, 2x2g, 1x1g, rack (1 per EA)

Our Variable Volume Micropipettes feature built-in tip ejectors and autoclavable tip cones. They work on a click stop digital system, are easy to calibrate and maintain, and easy to disassemble for autoclaving. Manufactured in an ISO 9001:2008 certified f (1 per EA)

United brand bottle top dispensers offer high accuracy at economical prices. Each dispenser is individually calibrated and certified in an ISO 17025 accredited laboratory in accordance with ISO 8655 standards. Five adapters are included with each unit for use with a wide range of bottle sizes. All wetted parts are made from PTFE and borosilicate glass for maximum chemical resistance. These easy-to-use instruments are suitable for all laboratory applications except HF. Special precautions must be taken for use, cleaning, and storage when working with concentrated fuming acids. A factory calibration certificate is provided with each bottle top dispenser. Dispensers are easy to disassemble and can be recalibrated in the lab. Fully autoclavable at 121°C, 15 psi for 10 to 15 minutes. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

United Scientific® Pinpoint™ Silicone Adapter (1 per EA )

Non-vacuum desiccator manufactured from clear borosilicate glass, including borosilicate glass lid with a molded-in knob. Also includes a perforated porcelain desiccator plate that fits onto a ridge above the lower chamber. A standard drying agent, such as silica or anhydrous calcium chloride, can be positioned in the lower chamber. Autoclavable. Flange outer diameter: 300mm Flange inner diameter: 234mm Top chamber diameter: 300mm Top chamber height: 125mm Maximum clearance above plate: 205mm Note: The rims of the desiccator and lid are ground glass and require greasing before use to create an air-tight seal. (1 per EA)

Hooded flint spark lighter is designed to trap gas and protect the lighting file. (1 per EA)

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 121°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The knurled knob on the top provides easy handling of the dome. The lower part is made of PP and includes a perforated PP desiccator plate. An internal groove on the flange holds the silicon rubber O-ring. The PP stopcock accepts 1/4" I.D. tubing and has a self-lubricating PTFE plug. Use the three-way plug to create a vacuum, release a vacuum, or for shut-off. (1 per EA)

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Ever (1 per EA)

These mini pipettes include a two step plunger that facilitates super blowout from the tip (last drop dispensing), resulting in very high accuracy and precision. This allows the mini pipette to be used for reverse pipetting and repetitive pipetting.The ti (1 per EA)

These mini pipettes include a two step plunger that facilitates super blowout from the tip (last drop dispensing), resulting in very high accuracy and precision. This allows the mini pipette to be used for reverse pipetting and repetitive pipetting.The ti (1 per EA)

This series of digital heating mantles includes a built-in stirrer function. Separate knobs control the temperature level up to 400° C and stirring speed up to 800 rpm. The external probe allows the temperature of the contents of the flask to be directly measured. Case is constructed of durable stainless steel and aluminum materials. Knitted mantle is made from glass fiber yarn and designed to securely hold round bottom flasks with the top half of the flask visible during operation. Available in various sizes to hold flasks from 100 ml to 5000 ml capacity. Includes a spill collect system to drain solution if a flask breaks during use. (1 per EA )

Individually calibrated weights made of high quality stainless steel. Comes with a sturdy plastic storage block. Set of 10 includes one each of 5g, 10g, 50g, 100g, 500g, and 1000g, plus two each of 20g and 200g weights (1 per EA)

Desiccators include on three 16mm high feet. Glazed on top surface. (1 per EA)

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Ever (1 per EA)

United Scientific® Ecopoint™, 2000-10000 ΜL (1 per EA )

Our Multichannel Micropipettes are recommended for a wide variety of applications such as ELISA, molecular screening, kinetic studies, and DNA Amplifications. Our Variable Volume Micropipettes feature built-in tip ejectors and autoclavable tip cones. Th (1 per EA)