Lab Equipment

At Laboratory Procurement Services (LPS) we are committed to offering a wide range of affordable laboratory equipment, from microscopes and centrifuges to electrophoresis systems, ultralow freezers and balances to researchers, educators, and healthcare professionals. Our mission is to ensure that the cost of equipment does not hinder progress in scientific research and innovation.

 LPS streamlines the procurement process, to allow our customers to spend more time performing the critical processes needed to help their company succeed.  Contact us today for assistance in selecting the best equipment for your requirements.

Before ordering equipment, check the electrical requirements: products are listed for specific voltages and frequencies, such as 120V/60Hz or 208-240V, and some need a dedicated circuit. Measure the space you have, including clearance for ventilation and door swing on refrigerators and freezers. Check what the unit needs to run, such as a water feed and replacement cartridges for water purification systems, electrodes and buffers for meters, or rotors and adapters for centrifuges, and confirm that parts and consumables are available for the model. If you work under a quality system, look for data logging, temperature monitoring or GLP features.

Equipment: common questions

What equipment does a biopharmaceutical lab need?

Most biopharmaceutical and life science labs rely on balances, pipettes and dispensers, centrifuges, mixers and shakers, incubators and water baths, laboratory refrigerators and ultralow freezers, pH and conductivity meters, and water purification systems. Cell culture work also needs biological safety cabinets and CO2 incubators. The exact list depends on the processes, sample types and regulatory requirements of the lab.

What is the difference between rpm and g-force on a centrifuge?

Rpm is how many times the rotor turns per minute. G-force, or relative centrifugal force (RCF), is the force actually applied to the sample, and it depends on both speed and rotor radius. Because rotors differ in radius, the same rpm can give different g-forces on different centrifuges, so many protocols specify x g. Most centrifuges can display or convert between the two.

What should I check on electrical equipment before ordering?

Confirm the voltage, frequency and plug type match your outlet; a 208-240V unit will not run on a standard 120V outlet. Check the current draw, since large freezers, chillers and ovens may need a dedicated circuit. Also allow the clearance around the unit that the manufacturer specifies for air flow and service.

How long does lab equipment take to arrive?

Many items ship directly from the manufacturer, so lead times vary by item. Orders can be placed online, and approved business accounts can pay by purchase order. For lead times or pricing on several items, contact LPS through the Contact Us page.

Equipment

Filters
Set Descending Direction

1711 items

Page
per page
View as List Grid
  1. Single Microplate Holder
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $94.95 Special Price $76.73
  2. Uni Block 16 mm Test Tubes
    Manufacturer: Ohaus Corporation
    Uni Block 16 mm Test Tubes (1 per EA)
    Learn More
    was $480.95 Special Price $420.87
  3. Analytical Balance PR224
    Manufacturer: Ohaus Corporation
    Analytical Balance PR224 (1 per EA)
    Learn More
    was $2,961.95 Special Price $2,643.59
  4. Static Ionizer, ION-100A, AM
    Manufacturer: Ohaus Corporation
    Static Ionizer, ION-100A, AM (1 per EA)
    Learn More
    was $2,659.95 Special Price $2,506.54
  5. Shaker, Heavy Duty, SHHD2325AL, US
    Manufacturer: Ohaus Corporation
    Eight Orbital Shakers Offering a Variety of Capacities and Flexibility to Maximize Sample Processing. Ready for your lab – all models include a tray and rubber mat and can be customized with over 70 accessory options. Rely on the digital shakers' exclusive Accu-Drive shaking system for exceptional speed control, accuracy, and durability. All models feature a maintenance-free motor for long-term use. Protect your samples. Optimal speed ramping feature slowly increases the speed to setpoint to avoid splashing. The load sensor detects unbalanced conditions and automatically reduces to a safe speed. (1 per EA)
    Learn More
    was $6,897.95 Special Price $5,571.46
  6. Electronic Balance, STX6201
    Manufacturer: Ohaus Corporation
    Electronic Balance, STX6201 (1 per EA)
    Learn More
    was $1,466.95 Special Price $1,086.14
  7. Rotor Swing out 4x750ml ID Sealable
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation. Choose from a range of rotors to be used with Frontier centrifuges to match capacities and flexibility required for your basic to high-performance sample preparation needs. Designed with usability in mind, the Frontier rotors can be effortlessly installed or removed in a few quick and simple steps, and users have easy access to the samples. The sturdy rotors are constructed of high-quality materials, built to last through demanding workflows from autoclave sterilization to sub-zero temperature. (1 per EA)
    Learn More
    was $2,499.95 Special Price $1,682.69
  8. Bench Scale i-D33P150B1X2 AM
    Manufacturer: Ohaus Corporation
    Bench Scales for Basic Industrial Applications (1 per EA)
    Learn More
    was $1,507.95 Special Price $1,116.50
  9. Module Block Combination
    Manufacturer: Ohaus Corporation
    Most Comprehensive Selection of Modular Blocks in the Industry with Over 40 Options (1 per EA)
    Learn More
    was $222.95 Special Price $180.12
  10. Microplate Thermal Block
    Manufacturer: Ohaus Corporation
    Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)
    Learn More
    was $1,692.95 Special Price $1,367.43
  11. Electronic Balance, SPX1201
    Manufacturer: Ohaus Corporation
    Electronic Balance, SPX1201 (1 per EA)
    Learn More
    was $1,411.95 Special Price $950.39
  12. Module Block 15/16 mm 12 Hole
    Manufacturer: Ohaus Corporation
    Most Comprehensive Selection of Modular Blocks in the Industry with Over 40 Options (1 per EA)
    Learn More
    was $222.95 Special Price $180.12
  13. Foam Insert For (34) 12-13 mm Tubes
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $68.95 Special Price $55.73
  14. PH Meter a-AB41PH -F
    Manufacturer: Ohaus Corporation
    An Advanced, Research-Grade Benchtop pH Meter Offering Accurate, Repeatable Results (1 per EA)
    Learn More
    was $1,475.95 Special Price $1,092.81
  15. Ampule Tube Holder - Large (10-17mm)
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $288.95 Special Price $233.43
  16. Rack 38x1.1/1.4ml D8mm Sar x2
    Manufacturer: Ohaus Corporation
    Rack 38x1.1/1.4ml D8mm Sar x2 (2 per PK)
    Learn More
    was $501.00 Special Price $334.00
  17. Vortex Mixer, Mini Fix Speed, VXMNFS, US
    Manufacturer: Ohaus Corporation
    Choose the Perfect Vortex Mixer From Four Durable Models for Everyday Mixing (1 per EA)
    Learn More
    was $397.95 Special Price $321.46
  18. Rotor, Angle, 6x50ml RB, ID, Hi
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation. Choose from a range of rotors to be used with Frontier centrifuges to match capacities and flexibility required for your basic to high-performance sample preparation needs. Designed with usability in mind, the Frontier rotors can be effortlessly installed or removed in a few quick and simple steps, and users have easy access to the samples. The sturdy rotors are constructed of high-quality materials, built to last through demanding workflows from autoclave sterilization to sub-zero temperature. (1 per EA)
    Learn More
    was $2,656.95 Special Price $1,788.37
  19. Overhead Stirrer e-A51ST020
    Manufacturer: Ohaus Corporation
    Reliable Overhead Stirrers with Excellent Performance for Everyday Use. Powerful mixing and constant speed is assured with the brushless motor and torque compensation technology – delivering accurate, controlled stirring of viscous liquids with quiet operation Simplify setup with the Keyless Chuck – no tools required. Change shafts quickly and easily with one-handed operation. This unique design will save time and effort for everyone in the lab. Designed for safety. The lock button prevents accidental speed changes, and the motor's overload sensing technology simply shuts off stirring before an overload condition occurs to protect the sample. (1 per EA)
    Learn More
    was $1,819.95 Special Price $1,470.00
  20. Test Tube Rack For 50 mL Tubes
    Manufacturer: Ohaus Corporation
    Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)
    Learn More
    was $293.95 Special Price $237.46
  21. Double Microplate Holder
    Manufacturer: Ohaus Corporation
    Comprehensive Selection of Vortexer Accessories for a Wide Range of Applications (1 per EA)
    Learn More
    was $109.95 Special Price $88.85
  22. Adapter 15x1.5/2.0ml D11mm MTB x2
    Manufacturer: Ohaus Corporation
    Adapter 15x1.5/2.0ml D11mm MTB x2 (2 per PK)
    Learn More
    was $373.00 Special Price $248.66
  23. Module Block Solid Double
    Manufacturer: Ohaus Corporation
    Most Comprehensive Selection of Modular Blocks in the Industry with Over 40 Options (1 per EA)
    Learn More
    was $324.95 Special Price $262.50
  24. Separatory Funnel Platform 46 X 46 cm
    Manufacturer: Ohaus Corporation
    Largest Variety of Options to Accommodate Any Shaking Application (1 per EA)
    Learn More
    was $958.95 Special Price $774.57
Filters
Set Descending Direction

1711 items

Page
per page
View as List Grid