Centrifuge Rotor

One of the most frequent mistakes centrifuge buyers make is purchasing the wrong rotor and/or sample carrier. LPS can help you avoid this costly error, and help you save money by finding the best rotor / carrier combination to spin your samples.

Schedule a consultation with us today. We can help you put together the perfect centrifuge package to meet the requirements of your application at a price you can afford.

A rotor must be listed for your exact centrifuge model; check the model or series named in the product title, such as the GCM, GCH-24 or GCC-MP Series, MC-24 Touch, Sprout or Z216. Choose between a fixed-angle rotor, which pellets quickly and suits microtubes and high-speed work, and a swing-out rotor with buckets, which gives flat pellets and handles larger tubes, bottles and microplates. Check the number of places and tube sizes, the rotor's maximum speed and RCF compared with what your protocol needs, and whether you need a sealable or hermetically sealed lid to contain aerosols from hazardous samples.

Centrifuge Rotors: common questions

What is the difference between a fixed-angle and a swing-bucket rotor?

A fixed-angle rotor holds tubes at a set angle, so particles travel a short distance and pellet quickly against the side of the tube. It is common for microtubes and high-speed work. A swing-bucket (swing-out) rotor lets buckets swing out horizontally as it spins, giving a flat pellet at the bottom of the tube. It suits larger volumes, density gradients and microplates, but usually runs at lower top speeds.

Why does centrifuge rotor radius matter?

The force on a sample depends on both speed and radius. Relative centrifugal force is calculated as RCF = 1.118 x 10^-5 x r x rpm², with r the radius in centimeters. Two rotors spinning at the same rpm can apply different g-forces if their radii differ, so protocols written in x g are easier to transfer between centrifuges. The rotor's documentation lists its maximum radius.

What are centrifuge buckets and carriers?

Buckets and carriers hold the samples in a swing-out rotor. Buckets usually take tubes, bottles or tube adapters, while carriers are flat holders for microplates or deep-well plates. They must be the type listed for your rotor, and they should be loaded in opposite pairs with matching weights so the rotor stays balanced.

Can I get help choosing a rotor or pricing a centrifuge package?

Yes. You can request volume or quote pricing, including pricing for a centrifuge with rotors and adapters, through the Contact Us page. Approved business accounts can pay by purchase order, and many items ship directly from the manufacturer, so lead times vary by item.

Centrifuge Rotors

Filters
Set Descending Direction

118 items

Page
per page
View as List Grid
  1. 44 x 1.5/2.0ml rotor (for Z216 series only)
    Manufacturer: Benchmark Scientific
    44 x 1.5/2.0ml rotor , for Z216 series only , EA /1 (1 per EA)
    Learn More
    was $1,052.84 Special Price $963.56
  2. Rotor Angle 4x500ml ID
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation. Choose from a range of rotors to be used with Frontier centrifuges to match capacities and flexibility required for your basic to high-performance sample preparation needs. Designed with usability in mind, the Frontier rotors can be effortlessly installed or removed in a few quick and simple steps, and users have easy access to the samples. The sturdy rotors are constructed of high-quality materials, built to last through demanding workflows from autoclave sterilization to sub-zero temperature. (1 per EA)
    Learn More
    was $6,020.95 Special Price $4,052.60
  3. Rotor, Angle, 12x5ml, Sealable
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation. Choose from a range of rotors to be used with Frontier centrifuges to match capacities and flexibility required for your basic to high-performance sample preparation needs. Designed with usability in mind, the Frontier rotors can be effortlessly installed or removed in a few quick and simple steps, and users have easy access to the samples. The sturdy rotors are constructed of high-quality materials, built to last through demanding workflows from autoclave sterilization to sub-zero temperature. (1 per EA)
    Learn More
    was $2,102.95 Special Price $1,415.48
  4. Rotor, Angle, 6x50ml RB
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation. Choose from a range of rotors to be used with Frontier centrifuges to match capacities and flexibility required for your basic to high-performance sample preparation needs. Designed with usability in mind, the Frontier rotors can be effortlessly installed or removed in a few quick and simple steps, and users have easy access to the samples. The sturdy rotors are constructed of high-quality materials, built to last through demanding workflows from autoclave sterilization to sub-zero temperature. (1 per EA)
    Learn More
    was $1,424.95 Special Price $959.13
  5. 30 x 1.5/2.0ml rotor (for Z216 series only)
    Manufacturer: Benchmark Scientific
    30 x 1.5/2.0ml rotor, for Z216 series only EA/1 (1 per EA)
    Learn More
    was $1,240.39 Special Price $1,135.21
  6. Rotor, Angle, 6x85ml RB, ID, Hi
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation. Choose from a range of rotors to be used with Frontier centrifuges to match capacities and flexibility required for your basic to high-performance sample preparation needs. Designed with usability in mind, the Frontier rotors can be effortlessly installed or removed in a few quick and simple steps, and users have easy access to the samples. The sturdy rotors are constructed of high-quality materials, built to last through demanding workflows from autoclave sterilization to sub-zero temperature. (1 per EA)
    Learn More
    was $3,036.95 Special Price $2,044.13
  7. COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml), each
    Manufacturer: Benchmark Scientific
    COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml), each (1 per EA)
    Learn More
    was $606.95 Special Price $560.83
  8. Angle Rotor 24 × 2.0 ml Spin Column
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $598.95 Special Price $403.17
  9. 44 x 1.5/2.0ml rotor
    Manufacturer: Benchmark Scientific
    44 x 1.5/2.0ml rotor, EA /1 (1 per EA)
    Learn More
    was $1,375.22 Special Price $1,258.60
  10. 6 x 85ml High Speed insuperin rotor (25°)
    Manufacturer: Benchmark Scientific
    6 x 85ml High Speed rotor , 25° , EA /1 (1 per EA)
    Learn More
    was $3,059.24 Special Price $2,799.82
  11. 4 x pcr rotor
    Manufacturer: Benchmark Scientific
    4 x pcr rotor, EA /1 (1 per EA)
    Learn More
    was $1,593.32 Special Price $1,458.20
  12. Rotor Angle 24×2.0ml Spin Column V1
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $1,146.95 Special Price $772.02
  13. Rotor Angle 24x1.5/2.0ml ID BIOSEALS V1
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $1,498.95 Special Price $1,008.95
  14. Rotor for use with GCM-24 Series 15000rpm max, 36-Place, for 0.5mL MCTs
    Manufacturer: Globe Scientific
    Globe's GCM Series was designed with your lab in mind... whether you spin-down microcentrifuge tubes, PCR tubes or PCR Strips, the GCM will provide you with reliable performance use after use. Operating the GCM is quick and easy; close the lid to accelera (1 per EA)
    Learn More
    was $404.20 Special Price $353.67
  15. 30 x 15 ml rotor
    Manufacturer: Benchmark Scientific
    30 x 15 ml rotor, EA /1 (1 per EA)
    Learn More
    was $2,126.48 Special Price $1,946.15
  16. Rotor Angle 12x5ml FA ID Sealable
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $1,152.95 Special Price $776.06
  17. Rotor, 0.2ml PCR8 x4, FC5306
    Manufacturer: Ohaus Corporation
    Product details Where used Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $70.95 Special Price $66.91
  18. Rotor Hematocrit 24xCapillaries V2
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $888.95 Special Price $598.36
  19. Rotor, 1.5/2ml x8, FC5306
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $70.95 Special Price $66.91
  20. Rotor Swing out 4x200ml ID Sealable
    Manufacturer: Ohaus Corporation
    Offering Flexibility to Maximize Sample Preparation (1 per EA)
    Learn More
    was $1,086.95 Special Price $731.63
  21. Sensor, Rotor, FC5714/5718-R/5816R
    Manufacturer: Ohaus Corporation
    Sensor, Rotor, FC5714/5718-R/5816R (1 per EA)
    Learn More
    was $450.95 Special Price $424.98
  22. 2 X 8 PCR Strip Rotor with the lid for Oxford BenchMate C12V
    Manufacturer: Oxford Lab Products
    2 X 8 PCR Strip Rotor with the lid for Oxford BenchMate C12V centrifuge. (1 per EA )
    Learn More
    was $269.00 Special Price $196.56
Filters
Set Descending Direction

118 items

Page
per page
View as List Grid