RE-202-A ROTARY EVAPORATOR, BM-302-A WATER BATH (5L), GLASSWARE C, 115V
was $2,950.00 Special Price $2,632.88
Standard rotary evaporator with slide jack mechanism for convenient height adjustment. Set includes BO302-A oil bath (115V) and glassware set A with diagonal condenser. Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. Available in 220V and in combination with water bath. (3 per PK )
Manufacturer: Yamato Scientific America
SKU
RE-202-CWA-PK
RE-202-A ROTARY EVAPORATOR, BM-302-A WATER BATH (5L), GLASSWARE C, 115V is available to buy in increments of 1
Product Details
Download Details and SpecificationsYamato Mini Rotary Evaporator for Research and Development
- Rotate faster & slower (315 rpms – 5 rpms) than any other rotary evaporator on the market, so you can test new SOPs and develop better methods.
- Easily manage your expensive samples with small flask sizes (from 100ml to 2L).
- Program rotation direction changes, ramps, and other automations to get more done in the lab at once.
- Eliminate most manual steps in the sample drying and removal process by creating finer dry granules (ask us how).
- Easily analyze the residue left over after distillation.
- Orient for left or right-handed operation based on your limited bench space.
- Get a purpose-built R&D mini rotary evaporator priced 10-20% better than comparable models from the other names you know.
| Model | MODELS WITHOUT VACUUM CONTROLLER | |||
|---|---|---|---|---|
| RE202-AWA / 212-AWA (Glassware A) | RE202-BWA / 212-BWA (Glassware B) | RE202-CWA / 212-CWA (Glassware C) | ||
| Performance*¹ | ||||
| Operating ambient temp. range | 5~35°C | |||
| Speed range | 5~315 rpm*³ | |||
| Evaporation capacity | Up to 23 ml/min | |||
| Functions | ||||
| RPM display | Digital display / Control knob | |||
| Rotation mode | Forward/Reverse/Auto reverse | |||
| Spring-loaded jack | Manual balance (Max. height 200 mm, stepless regulation, one-touch lock) | |||
| Configuration | ||||
| Rotary motor | DC brushless (simple servo) | |||
| Condenser retention | --- | Condenser bracket | ||
| Safety functions | ||||
| Rotary evaporator | DC motor: Motor overload protection, overvoltage, low voltage, rotation speed sensor error AC adapter: Short circuit in internal circuit, overcurrent protection, overvoltage protection | |||
| Standard | ||||
| Cooling condenser | Double corrugated tube (cooling surface: 0.143 m²) | |||
| Suction port: GL-14 (lower), Φ10 nozzle | Suction Port: GL-14 (upper), Φ10 nozzle | |||
| Cooling port: GL14 (two places in lower part), two φ10 nozzles | ||||
| Compatible evaporation flask | 50-2000 ml. Use optional reducer to attach small flasks | |||
| Compatible receiving flask | 100-2000 ml | |||
| External dimensions*² | W719 × D324 × H534 | W529 × D324 × H745 | W529 × D324 × H745 | |
| Overall dimensions*² (W x D x H) | 744 × 365 × 534 | 554 × 365 × 745 | 554 × 365 × 745 | |
| Weight | ~10.0 kg | |||
| Power rating 50/60Hz | RE202: 100-115V 1A with plug RE212: 200-230V single phase 1A no plug, round terminal | |||
| Included accessories | Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1) | |||
| Glass set: Cooling condenser (type A/B/C)(1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1),flask clip (1), vacuum seal (1), condenser insulation kit (1),condenser bracket (1) (for type B/C), hex wrench (1) (for type B/C) | ||||
| Model | MODELS WITH VACUUM CONTROLLER | |||
|---|---|---|---|---|
| REV202M-AWA / 212M-AWA (Glassware A) | REV202M-BWA / 212M-BWA (Glassware B) | REV202M-CWA / 212M-CWA (Glassware C) | ||
| Performance*¹ | ||||
| Operating ambient temp. range | 5~35°C | |||
| Speed range | 5~315 rpm*³ | |||
| Evaporation capacity | Up to 23 ml/min | |||
| Pressure setting range | 0-1013 hPa | |||
| Functions | ||||
| RPM display | Digital display / Control knob | |||
| Rotation mode | Forward / Reverse / Auto inversion | |||
| Spring-loaded jack | Manual balance (maximum height 200 mm, stepless regulation, one-touch lock) | |||
| Configuration | ||||
| Vacuum controller | VR102S, installed above jack handle with attachment bracket | |||
| Vacuum control solenoid valve | OVR10, installed in the rear of stand base | |||
| Rotary motor | DC brushless (simple servo) | |||
| Condenser retention | --- | Condenser bracket | ||
| Safety functions | ||||
| Rotary evaporator | DC motor: Motor overload protection, overvoltage, low voltage, rotation speed sensor error AC adapter: Short circuit in internal circuit, overcurrent protection, overvoltage protection | |||
| Vacuum controller | Communication error, Pressure sensor error, Memory error, Leak error, High pressure error, Auto leak at error occurrence | |||
| Standard | ||||
| Cooling condenser | Double corrugated tube (cooling surface: 0.143 m²) | |||
| Suction port: GL-14 (lower), Φ10 nozzle | Suction Port: GL-14 (upper), Φ10 nozzle | Suction Port: GL-14 (upper), Φ10 nozzle | ||
| Cooling port: GL14 (two places in lower part), two φ10 nozzles | ||||
| Compatible evaporation flask | 50-2000 ml. Use optional reducer to attach small flasks | |||
| Compatible receiving flask | 100-2000 ml | |||
| External dimensions*² | W719 × D324 × H534 | W529 × D324 × H745 | W529 × D324 × H745 | |
| Overall dimensions*² (W x D x H) | 744 × 365 × 534 | 554 × 365 × 745 | 554 × 365 × 745 | |
| Weight | ~10.5 kg | |||
| Power rating 50/60Hz | REV202M: 100-115V 1A with plug REV212M: 200-230V single phase 1A no plug, round terminal | |||
| Included accessories | Main unit: AC adapter (1), power cable (1), bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape fastener roll (1) | |||
| Glass set: Cooling condenser (type A/B/C)(1), rotary joint (1), evaporation flask (1), receiving flask (1), ball joint clamp (1),flask clip (1), vacuum seal (1), condenser insulation kit (1),condenser bracket (1) (for type B/C), hex wrench (1) (for type B/C) | ||||
*¹ Performance data above based on 23 ±5°C room temperature, 65%RH ±20% humidity, and no process load.
*² Dimensions excludes protrusions.
*³ Applicable rotation speed range and sample volume depend on the capacity of evaporation flask.
Manufacturer Part Number/SKU: RE-202-CWA-PK
Tags: Rotary evaporator