11mm Clear Snap Cap, PTFE/Silicone w/Slit. Caps may be snapped on and off by hand which eliminates the need for metal crimping and decapping tools, thus reducing potential hazards due to sharp aluminum metal edges. Large opening top provides greater targe (100 per PK ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. Equvalent to Nasco# B01195(RT)WA (1000 per CS ) Learn More
The Secure-T® Blender Bags are now available in a new, compact and easy to use Secure-Strip® dispenser. This new approach to the conventional blender bag packaging offers a quicker access at all time. Application Labplas SECURE-T® Blender Bags provide a malleable yet durable and contaminant-free container for the even blending of your samples. Applications vary from general blending purposes to sample preparation for analysis testing. The new dispenser solution, Secure-Strip®, allows you to have all the product advantages of the blender bags in an easy, secure and friendly-use dispenser. Features & Benefits Easy storing and will follow you anywhere in the lab Tear-off junction between each bag ensures internal sterility right up until the time of use Sterility confirmation documentation (CofA) is available in each box (traceable certificate) Product meets USDA and ACIA industry standards and is made of FDA-compliant material All the benefits of a close and sterile blender bag with the feature and ease of an opened blender bag Product Technical Specifications The plastic tubing used in manufacturing our sampling bags is extruded at temperatures ranging between 220 and 240 deg. Celsius and is therefore internally sterile. Follow up tests are also performed to assure continued sterility after processing. Labplas Sterile Sampling Bags have consistently and successfully tested for sterility after 5 years of shelf life. R-Nase, D-Nase, Pyrogen and BPA free 250 sterile blender bags ready to use Equvalent to Nasco# B01318WA (1000 per CS ) Learn More
Uni-Flex® Safety Caps Benefits: • Will not aerosol when opened • 10, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes • Liquid tight seal prevents sample evaporation. The UniFlex® Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. • Easy identification of samples: Uni-Flex® Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors • The Uni-Flex Safety Cap locks securely onto the outside of the tube lip to prevent evaporation. • Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. • Easy to label: Write directly on the cap with indelible ink • Clear, natural colored caps are tracemetal free (10000 per CS ) Learn More
Ideal for stem cell and tissue-derived primary cell preparation Fit into nearly all 50ml conical tubes including BD Falcon (tm), TPP and MidSci brands. Tab molded within upper ring enables easy sterile handling Packed individually Sterilized Non-Pyrogenic, DNase/RNase Free (12 per CS ) Learn More
Sani-Sponge Kits are offered to test the carcasses for salmonella, E. coli and other pathogens. The SANI-SPONGE kit is designed to collect samples to detect the presence of microbiological contaminations such as Listeria, Salmonella, E. coli, and other food born pathogens on almost any surface. These kits are widely used in the food, medical, public health and cosmetic industries. The SANI-SPONGE kit is convenient, easy to use and helps eliminate several time-consuming steps. Comes in TWIRL'EM® Sterile Sampling bag TWIRL’EM bag with impervious closure system Gamma Sterilized 100 units per case (5 pouches of 20 units) Come in two varieties: Dry sponge or Wet Sponge SANI-SPONGE sampling kits are produced in accordance with HACCP, USDA ACIA and CFIA requirements. Caution: Do not use with alcoholic substances or where temperature exceeds 100°C (212°F). (100 per CS ) Learn More
Of all the water purification technologies available, distillation can remove a wider range of impurities than any other single form of water purification. LabStrong Fi-Streem Stills consistently produce high quality ASTM Type II water and can remove inor (1 per EA) Learn More
SpectraTube™ 50mL PP (29x115mm), flat rainbow screw cap, bulk bags, 25 tubes of each color per bag, 4 bags of each color per pack , 500/cs (500 per CS ) Learn More
Standard Methods Agar with Lecithin and Tween® 80, contact plate with Lok-Tight™ friction lid, optional locking feature, order by the package of 10, by Hardy Diagnostics MINIMUM ORDER: 10 PACKS Added measure to assure sterility in your environmental monitoring program! Hardy Diagnostics contact plates are recommended for use in the cultivation of microorganisms from environmental surfaces. Standard Methods Agar (Plate Count Agar/Tryptone Glucose Yeast "TGY" Agar) is recommended for use in determining the microbial content in dairy products, food, water samples, and other material of sanitary importance. 3 Easy Steps: 1. Remove lid. 2. Gently press plate to surface without twisting or sliding. 3. Twist clockwise until frosted bands line up to lock lid into place. Our Contact Plate features: Friction lid The friction lid design keeps lids in place before sampling. Lok-Tight™ Locking Lid An optional locking feature means lids stay secured post sampling and during transport to your lab. Molded Grid Each plate has a grid molded into the bottom of the plate to aid in the counting of microorganisms. Certificate of Analysis Available online for each lot. (10 per PK) Learn More
Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. (100 per PK ) Learn More