Adjustable operating temperature range: -15°C – -25°C Keyed door lock Magnetic door gasket for positive seal Heavy duty door handle White textured cabinet and door High density urethane foam cabinet and door insulation Not equipped with line cord and plug; must be hardwired in conduit to 120 VAC power source Meet NFPA and OSHA guidelines for hazardous locations, Class 1, Division II, Group C & D. These units are not intended for use in general clinical or research laboratories. Shipping weight: 195 lbs. (1 per EA ) Learn More
Adjustable operating temperature range: -15°C – -25°C Keyed door lock Magnetic door gasket for positive seal Heavy duty door handle White textured cabinet and door High density urethane foam cabinet and door insulation Not equipped with line cord and plug; must be hardwired in conduit to 120 VAC power source Meet NFPA and OSHA guidelines for hazardous locations, Class 1, Division II, Group C & D. These units are not intended for use in general clinical or research laboratories. Shipping weight: 195 lbs. (1 per EA ) Learn More
Adjustable operating temperature range: -15°C – -25°C Keyed door lock Magnetic door gasket for positive seal Heavy duty door handle White textured cabinet and door High density urethane foam cabinet and door insulation Not equipped with line cord and plug; must be hardwired in conduit to 120 VAC power source Meet NFPA and OSHA guidelines for hazardous locations, Class 1, Division II, Group C & D. These units are not intended for use in general clinical or research laboratories. Shipping weight: 195 lbs. (1 per EA ) Learn More
Water sampling requires clean and particle free sampling containers. In order to ensure proper test results, containers should be chemically stable. Experts say that polyethylene can be used for any type of water sampling and as such, the material is particularly used to sample water that will be tested for radioactivity; Collection of plant samples for plant disease identification. The thio tablets neutralize chlorine, iodine and other biocides or oxidizing agents found in water. They allow experts to find pathogens that couldn't be detected due to the presence of biocides and oxidizing agents. Labplas Water Sampling kits provide a quick and convenient way to collect chlorinated water specimens. Our sterile Water Sampling kits contain a nontoxic, nutritive tablet containing 10 mg of active sodium thiosulfate and are UPA-approved for drinking water analysis. The sodium thiosulfate instantly neutralizes halogen compounds (in this case chlorine) and enables effective bacterial or organic testing. Labplas Water Sampling kits are designed to collect, carry and contain chlorinated water samples in aseptic conditions. They are an economical and efficient alternative to rigid sampling containers. Product Specifications: Labplas Water Sampling kits are made with highly resistant FDA-approved polyethylene. Key features are: maximum bag mouth opening to facilitate the insertion of water sample, a convenient write-on strip and volume markings for measurements. All Labplas Water Sampling kit TWIRL'EM® bags come with safety tabs. The puncture proof tabs eliminate the sharp points that can cause bag puncture and/or abrasions. Labplas Water Sampling kits are sterilised using gamma irradiation. Complies with regulatory and industry requirements: EPA (US Environment Protection Agency) (1 per EA ) Learn More
Labplas is proud to announce a major breakthrough in the development of the first environmentally friendly sterile sampling bag available on the market today. Finally, an economical and timesaving green alternative to cleaning and storing re-usable rigid containers! Our new TWIRL’EM ECOLO product line includes all of the sizes and formats of the TWIRL’EM product line that you’re familiar with, retains all of the dependability and characteristics and is made with fully biodegradable LDPE plastic tubing. Equvalent to Nasco# B01195(RT)WA (1000 per CS ) Learn More
With the TWIRL'EM clean room application packaging, you can bring your sterile sampling bags into your clean room without any worries about contaminations. The bags are double pouched in packs of 25 so you can remove the outer bag before entering the clean room which minimize the number of bags exposed at a time. The bags are sterile inside and out. (1000 per CS ) Learn More
With the TWIRL'EM clean room application packaging, you can bring your sterile sampling bags into your clean room without any worries about contaminations. The bags are double pouched in packs of 25 so you can remove the outer bag before entering the clean room which minimize the number of bags exposed at a time. The bags are sterile inside and out. (1000 per CS ) Learn More
Labplas is proud to announce a major breakthrough in the development of the first environmentally friendly sterile sampling bag available on the market today. Finally, an economical and timesaving green alternative to cleaning and storing re-usable rigid containers! Our new TWIRL’EM ECOLO product line includes all of the sizes and formats of the TWIRL’EM product line that you’re familiar with, retains all of the dependability and characteristics and is made with fully biodegradable LDPE plastic tubing. Equvalent to Nasco# B01532WA (1000 per CS ) Learn More
Labplas is proud to announce a major breakthrough in the development of the first environmentally friendly sterile sampling bag available on the market today. Finally, an economical and timesaving green alternative to cleaning and storing re-usable rigid containers! Our new TWIRL’EM ECOLO product line includes all of the sizes and formats of the TWIRL’EM product line that you’re familiar with, retains all of the dependability and characteristics and is made with fully biodegradable LDPE plastic tubing. Equvalent to Nasco# B01341WA (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More
Labplas is proud to announce a major breakthrough in the development of the first environmentally friendly sterile sampling bag available on the market today. Finally, an economical and timesaving green alternative to cleaning and storing re-usable rigid containers! Our new TWIRL’EM ECOLO product line includes all of the sizes and formats of the TWIRL’EM product line that you’re familiar with, retains all of the dependability and characteristics and is made with fully biodegradable LDPE plastic tubing. (1000 per CS ) Learn More
With the TWIRL'EM clean room application packaging, you can bring your sterile sampling bags into your clean room without any worries about contaminations. The bags are double pouched in packs of 25 so you can remove the outer bag before entering the clean room which minimize the number of bags exposed at a time. The bags are sterile inside and out. (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More
Labplas is proud to announce a major breakthrough in the development of the first environmentally friendly sterile sampling bag available on the market today. Finally, an economical and timesaving green alternative to cleaning and storing re-usable rigid containers! Our new TWIRL’EM ECOLO product line includes all of the sizes and formats of the TWIRL’EM product line that you’re familiar with, retains all of the dependability and characteristics and is made with fully biodegradable LDPE plastic tubing. Equvalent to Nasco# B01195(RT)WA (1000 per CS ) Learn More
With the TWIRL'EM clean room application packaging, you can bring your sterile sampling bags into your clean room without any worries about contaminations. The bags are double pouched in packs of 25 so you can remove the outer bag before entering the clean room which minimize the number of bags exposed at a time. The bags are sterile inside and out. (1000 per CS ) Learn More
With the TWIRL'EM clean room application packaging, you can bring your sterile sampling bags into your clean room without any worries about contaminations. The bags are double pouched in packs of 25 so you can remove the outer bag before entering the clean room which minimize the number of bags exposed at a time. The bags are sterile inside and out. (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More
Labplas is proud to announce a major breakthrough in the development of the first environmentally friendly sterile sampling bag available on the market today. Finally, an economical and timesaving green alternative to cleaning and storing re-usable rigid containers! Our new TWIRL’EM ECOLO product line includes all of the sizes and formats of the TWIRL’EM product line that you’re familiar with, retains all of the dependability and characteristics and is made with fully biodegradable LDPE plastic tubing. (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More
Labplas TWIRL'EM® Sterile Sampling Bags provide a secure, contaminant-free pliant container that ensures dependable analysis results. You can count on TWIRL'EM® products as a proven, economical and efficient way to collect, contain and carry samples. These sterile bags are used for environmental sampling (surface samples), carcass sampling, biomedical and pharmaceutical research, quality assurance procedures (QA/QC), food industry applications and clinical and veterinary medicine. Labplas TWIRL'EM® Sterile Sampling Bags comply with regulatory and industry requirements: EPA (US Environment Protection Agency) FDA (US Food and Drug Administration) USDA (US Department of Agriculture) HACCP (Hazard Analysis and Critical Control Point) Labplas TWIRL'EM® Sterile Sampling Bags are made with highly resistant FDA approved virgin polyethylene tubing which eliminates side seals and ensures maximum bag mouth opening to facilitate sample insertion. The polyethylene tubing is extruded at 240 Celsius, which guaranties internal sterility. Equally important, the inside is never exposed to the environment during our production process. TWIRL'EM® Sterile Sampling Bags come with a range of different closure systems: the standard version with two round wires; 1 round and 1 flat wire; or for large and heavy bags, a very strong closure consisting of 2 flat wires. TWIRL'EM® products are available with regular closure tabs or with safety tabs. (1000 per CS ) Learn More